[Bug 1192167] Re: setup-2.8.5-1 is not installed to fresh chroot

[Elan Ruusamäe]

here are two problems:

1. setup %post -p /sbin/postshell fails, because switch to glibc change:
http://git.pld-linux.org/?p=packages/setup.git;a=commitdiff;h=a0098a54771a73283ff3da722d9d6518a5d909d4

and that does not seem to work if glibc is not installed

2. rpm db is inconsistent that "setup" package is omitted from rpmdb but packages require it:
# rpm -r /tmp/rd -Va
Unsatisfied dependencies for glibc-2.17-6.x86_64:
   Requires: /sbin/postshell
   Requires: /sbin/postshell

Unsatisfied dependencies for mksh-44-1.x86_64:
   Requires: setup >= 2.4.6-2

-- 
You received this bug notification because you are subscribed to PLD
Linux.
https://bugs.launchpad.net/bugs/1192167

Title:
  setup-2.8.5-1 is not installed to fresh chroot

Status in PLD Linux Distribution:
  New

Bug description:
  # rm -rf /tmp/rd; install -d /tmp/rd; rpm -r /tmp/rd --initdb; poldek -r /tmp/rd/ -u setup --noask
  Processing dependencies...
  setup-2.8.5-1.x86_64 marks FHS-2.3-35.x86_64 (cap /etc)
  setup-2.8.5-1.x86_64 marks glibc-2.17-6.x86_64 (cap libc.so.6()(64bit))
   glibc-2.17-6.x86_64 marks mksh-44-1.x86_64 (cap /bin/sh)
   glibc-2.17-6.x86_64 marks filesystem-4.0-22.x86_64 (cap /etc/default)
   glibc-2.17-6.x86_64 marks ldconfig-2.17-6.x86_64 (cap /sbin/ldconfig)
   glibc-2.17-6.x86_64 marks libselinux-2.1.9-2.x86_64 (cap libselinux.so.1()(64bit))
    libselinux-2.1.9-2.x86_64 marks libsepol-2.1.4-1.x86_64 (cap libsepol >= 2.1.4)
  There are 8 packages to install (7 marked by dependencies):
  I setup-2.8.5-1.x86_64
  D FHS-2.3-35.x86_64  filesystem-4.0-22.x86_64  glibc-2.17-6.x86_64  ldconfig-2.17-6.x86_64  libselinux-2.1.9-2.x86_64  libsepol-2.1.4-1.x86_64  mksh-44-1.x86_64
  This operation will use 10.9MB of disk space.
  Need to get 3.4MB of archives (208.7KB to download).

  Retrieving th::setup-2.8.5-1.x86_64.rpm...
  .............................. 100.0% [208.7K (208.7K/s)]                  
  Executing rpm --upgrade -vh --root /tmp/rd --define _check_dirname_deps 1...
  Preparing...                ########################################### [100%]
     1:FHS                    ########################################### [ 13%]
     2:ldconfig               ########################################### [ 25%]
     3:filesystem             ########################################### [ 38%]
     4:libsepol               ########################################### [ 50%]
     5:setup                  ########################################### [ 63%]
  error: %post(setup-2.8.5-1.x86_64) scriptlet failed, exit status 255
     6:glibc                  ########################################### [ 75%]
     7:libselinux             ########################################### [ 88%]
     8:mksh                   ########################################### [100%]
  Adding /bin/sh to /etc/shells
  Adding /bin/ksh to /etc/shells
  Adding /bin/mksh to /etc/shells

  
  # rpm -r /tmp/rd -q setup
  package setup is not installed

  
  # poldek -r /tmp/rd/ -u setup
  Processing dependencies...
  There are 1 package to install:
  I setup-2.8.5-1.x86_64
  This operation will use 758.4KB of disk space.
  Need to get 208.7KB of archives. 
  Executing etckeeper.sh --upgrade -vh --root /tmp/rd --define _check_dirname_deps 1...
  Preparing...                ########################################### [100%]
     1:setup                  ########################################### [100%]

  # rpm -r /tmp/rd -q setup
  setup-2.8.5-1.x86_64

  the same problem occours in i686 as well

To manage notifications about this bug go to:
https://bugs.launchpad.net/pld-linux/+bug/1192167/+subscriptions