SOURCES: findutils-info.patch, findutils-pl.po-update.patch, findu...
qboosh
qboosh at pld-linux.org
Sun Nov 27 10:30:05 CET 2005
Author: qboosh Date: Sun Nov 27 09:30:04 2005 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- updated for 4.2.26
---- Files affected:
SOURCES:
findutils-info.patch (1.5 -> 1.6) , findutils-pl.po-update.patch (1.10 -> 1.11) , findutils-selinux.patch (1.12 -> 1.13)
---- Diffs:
================================================================
Index: SOURCES/findutils-info.patch
diff -u SOURCES/findutils-info.patch:1.5 SOURCES/findutils-info.patch:1.6
--- SOURCES/findutils-info.patch:1.5 Wed Oct 26 00:22:30 2005
+++ SOURCES/findutils-info.patch Sun Nov 27 10:29:59 2005
@@ -1,5 +1,5 @@
---- findutils-4.2.25/doc/find.texi.orig 2005-09-02 22:48:07.000000000 +0200
-+++ findutils-4.2.25/doc/find.texi 2005-10-26 00:05:29.278486352 +0200
+--- findutils-4.2.26/doc/find.texi.orig 2005-10-31 06:21:47.000000000 +0100
++++ findutils-4.2.26/doc/find.texi 2005-11-27 03:30:29.025869696 +0100
@@ -12,17 +12,11 @@
@finalout
@end iftex
@@ -22,7 +22,7 @@
@end direntry
@copying
-@@ -2259,10 +2253,6 @@
+@@ -2260,10 +2254,6 @@
fileserver where that filesystem is on a local disk, to prevent
thrashing the network.
@@ -33,7 +33,7 @@
@node Database Formats
@section Database Formats
-@@ -2435,14 +2425,12 @@
+@@ -2436,14 +2426,12 @@
discussed in this manual.
@menu
@@ -51,7 +51,7 @@
@section Invoking @code{find}
@example
-@@ -2510,7 +2498,7 @@
+@@ -2511,7 +2499,7 @@
@end menu
@@ -60,7 +60,7 @@
@subsection Warning Messages
If there is an error on the @code{find} command line, an error message
-@@ -2562,249 +2550,7 @@
+@@ -2563,243 +2551,7 @@
Use of an unrecognised formatting directive with @samp{-fprintf}
@end itemize
@@ -193,12 +193,6 @@
-pathname.
-
- at item --regextype
--This option changes the regular expression dialect used. Dialects
--understood are described in @ref{Regular Expressions}.
--
--
--
-- at item --regextype
-This option changes the regular expression syntax and behaviour used
-by the @samp{--regex} option. @ref{Regular Expressions} for more
-information on the regular expression dialects understood by GNU
@@ -311,7 +305,7 @@
@section Invoking @code{xargs}
@example
-@@ -2915,7 +2661,7 @@
+@@ -2925,7 +2677,7 @@
@end table
================================================================
Index: SOURCES/findutils-pl.po-update.patch
diff -u SOURCES/findutils-pl.po-update.patch:1.10 SOURCES/findutils-pl.po-update.patch:1.11
--- SOURCES/findutils-pl.po-update.patch:1.10 Wed Oct 26 00:21:30 2005
+++ SOURCES/findutils-pl.po-update.patch Sun Nov 27 10:29:59 2005
@@ -1,28 +1,28 @@
---- findutils-4.2.25/po/pl.po.orig 2005-09-03 12:46:35.000000000 +0200
-+++ findutils-4.2.25/po/pl.po 2005-10-25 23:44:37.807738824 +0200
+--- findutils-4.2.26/po/pl.po.orig 2005-11-19 09:36:52.000000000 +0100
++++ findutils-4.2.26/po/pl.po 2005-11-27 03:25:58.126052728 +0100
@@ -5,10 +5,10 @@
#
msgid ""
msgstr ""
--"Project-Id-Version: findutils 4.2.22\n"
-+"Project-Id-Version: findutils 4.2.25\n"
+-"Project-Id-Version: findutils 4.2.15\n"
++"Project-Id-Version: findutils 4.2.26\n"
"Report-Msgid-Bugs-To: bug-findutils at gnu.org\n"
- "POT-Creation-Date: 2005-09-03 11:46+0100\n"
--"PO-Revision-Date: 2005-06-18 23:02+0200\n"
-+"PO-Revision-Date: 2005-10-25 23:40+0200\n"
+ "POT-Creation-Date: 2005-11-19 00:36-0800\n"
+-"PO-Revision-Date: 2005-02-06 03:02+0100\n"
++"PO-Revision-Date: 2005-11-27 03:04+0100\n"
"Last-Translator: Jakub Bogusz <qboosh at pld-linux.org>\n"
"Language-Team: Polish <translation-team-pl at lists.sourceforge.net>\n"
"MIME-Version: 1.0\n"
-@@ -212,7 +212,7 @@
- #: find/find.c:1901
+@@ -231,7 +231,7 @@
+ #: find/find.c:1906
#, c-format
msgid "warning: not following the symbolic link %s"
-msgstr ""
+msgstr "uwaga: nie podążanie za dowiązaniem symbolicznym %s"
- #: find/find.c:1945
+ #: find/find.c:1950
#, c-format
-@@ -277,7 +277,6 @@
+@@ -296,7 +296,6 @@
" WYR1 -o WYR2 WYR1 -or WYR2 WYR1 , WYR2\n"
#: find/parser.c:792
@@ -30,7 +30,7 @@
msgid ""
"positional options (always true): -daystart -follow -regextype\n"
"\n"
-@@ -285,7 +284,8 @@
+@@ -304,7 +303,8 @@
" -depth --help -maxdepth LEVELS -mindepth LEVELS -mount -noleaf\n"
" --version -xdev -ignore_readdir_race -noignore_readdir_race\n"
msgstr ""
@@ -40,7 +40,7 @@
"opcje zwykłe (zawsze prawdziwe, podawane przed innymi wyrażeniami):\n"
" -depth --help -maxdepth POZIOMY -mindepth POZIOMY -mount -noleaf\n"
" --version -xdev -ignore_readdir_race -noignore_readdir_race\n"
-@@ -322,6 +322,10 @@
+@@ -341,6 +341,10 @@
" -exec COMMAND ; -exec COMMAND {} + -ok COMMAND ;\n"
" -execdir COMMAND ; -execdir COMMAND {} + -okdir COMMAND ;\n"
msgstr ""
@@ -51,7 +51,24 @@
#: find/parser.c:812
msgid ""
-@@ -574,7 +578,7 @@
+@@ -367,6 +371,7 @@
+ "perhaps '-samefile'. Alternatively, if you are using GNU grep, you could "
+ "use 'find ... -print0 | grep -FzZ %s'."
+ msgstr ""
++"uwaga: uniksowe nazwy plików zwykle nie zawierają ukośników (natomiast ścieżki plików tak). Oznacza to, że '%s %s' prawdopodobnie będzie zawsze fałszywe na tym systemie. Test '-wholename' może być bardziej przydatny, ewentualnie '-samefile'. Alternatywnie, jeśli dostępny jest GNU grep, można użyć 'find ... -print0 | grep -FzZ %s'."
+
+ #: find/parser.c:900
+ msgid ""
+@@ -570,7 +575,7 @@
+
+ #: locate/locate.c:861
+ msgid "warning: the locate database can only be read from stdin once."
+-msgstr ""
++msgstr "uwaga: bazę danych locate ze standardowego wejścia można odczytać tylko raz."
+
+ #: locate/locate.c:882
+ #, c-format
+@@ -587,7 +592,7 @@
msgstr "starym"
#: locate/locate.c:1105
@@ -60,19 +77,91 @@
msgid ""
"Usage: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
" [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
-@@ -590,7 +594,8 @@
+@@ -598,12 +603,14 @@
+ " [-version] [--help]\n"
+ " pattern...\n"
+ msgstr ""
+-"Składnia: %s [-d ścieżka | --database=ścieżka] [-e | --existing]\n"
++"Składnia: %s [-d ścieżka | --database=ścieżka] [-e | -E | --[non-]existing]\n"
+ " [-i | --ignore-case] [-w | --wholepath] [-b | --basename] \n"
" [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
" [-P | -H | --nofollow] [-L | --follow] [-m | --mmap ] [ -s | --"
"stdio ]\n"
--" [-A | --all] [-p | --print] [-r | --regex ] [--version] [--help]\n"
+-" [-r | --regex ] [--version] [--help] wzorzec...\n"
+" [-A | --all] [-p | --print] [-r | --regex ] [--regextype=RODZAJ]\n"
+" [--version] [--help]\n"
- " wzorzec...\n"
++" wzorzec...\n"
#: locate/locate.c:1231
-@@ -714,67 +719,3 @@
- " [--max-chars=max-znaków] [--verbose] [--exit] [--max-procs=max-proc]\n"
- " [--max-args=max-arg] [--no-run-if-empty] [--arg-file=plik]\n"
+ #, c-format
+@@ -617,7 +624,7 @@
+ #: xargs/xargs.c:330
+ #, c-format
+ msgid "Ilegal escape sequence %s in input delimiter specification."
+-msgstr ""
++msgstr "Niedopuszczalna sekwencja sterująca %s w określeniu ogranicznika wejścia."
+
+ #: xargs/xargs.c:348
+ #, c-format
+@@ -625,6 +632,7 @@
+ "Ilegal escape sequence %s in input delimiter specification; character values "
+ "must not exceed %lx."
+ msgstr ""
++"Niedopuszczalna sekwencja sterująca %s w określeniu ogranicznika wejścia; wartości znaków nie mogą przekraczać %lx."
+
+ #: xargs/xargs.c:354
+ #, c-format
+@@ -632,6 +640,7 @@
+ "Ilegal escape sequence %s in input delimiter specification; character values "
+ "must not exceed %lo."
+ msgstr ""
++"Niedopuszczalna sekwencja sterująca %s w określeniu ogranicznika wejścia; wartości znaków nie mogą przekraczać %lo."
+
+ #: xargs/xargs.c:363
+ #, c-format
+@@ -639,6 +648,7 @@
+ "Ilegal escape sequence %s in input delimiter specification; trailing "
+ "characters %s not recognised."
+ msgstr ""
++"Niedopuszczalna sekwencja sterująca %s w określeniu ogranicznika wejścia; końcowe znaki %s nie zostały rozpoznane."
+
+ #: xargs/xargs.c:410
+ #, c-format
+@@ -646,6 +656,7 @@
+ "Illegal input delimiter specification %s: the delimited must be either a "
+ "single character or an escape sequence starting with \\."
+ msgstr ""
++"Niedopuszczalne określenie ogranicznika wejścia %s: ogranicznik musi być pojedynczym znakiem lub sekwencją sterującą zaczynającą się od \\."
+
+ #: xargs/xargs.c:592
+ #, c-format
+@@ -742,7 +753,7 @@
+ msgstr "%s: wartość dla opcji -%c powinna być < %ld\n"
+
+ #: xargs/xargs.c:1229
+-#, fuzzy, c-format
++#, c-format
+ msgid ""
+ "Usage: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
+ " [-E eof-str] [-e[eof-str]] [--eof[=eof-str]]\n"
+@@ -754,110 +765,12 @@
+ " [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
+ " [--version] [--help] [command [initial-arguments]]\n"
+ msgstr ""
+-"Składnia: %s [-0prtx] [-e[łańc-eof]] [-i[łańc-zmienn]] [-l[max-linii]]\n"
+-" [-n max-arg] [-s max-znaków] [-P max-proc] [--null] [--eof[=łańc-"
+-"eof]]\n"
+-" [--replace[=łańc-zmienn]] [--max-lines[=max-linii]] [--interactive]\n"
+-" [--max-chars=max-znaków] [--verbose] [--exit] [--max-procs=max-proc]\n"
+-" [--max-args=max-arg] [--no-run-if-empty] [--arg-file=plik]\n"
++"Składnia: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=ogranicznik]\n"
++" [-E łańc-eof] [-e[łańc-eof]] [--eof[=łańc-eof]\n"
++" [-L maks-linii] [-l[maks-linii]] [--max-lines[=maks-linii]]\n"
++" [-I łańc-zmienn] [-i[łańc-zmienn]] [--replace[=łańc-zminn]]\n"
++" [-n maks-arg] [--max-args=maks-arg]\n"
++" [-s maks-znaków] [--max-chars=maks-znaków]\n"
++" [-P maks-proc] [--max-procs=maks-proc]\n"
++" [--verbose] [--exit] [--no-run-if-empty] [--arg-file=plik]\n"
" [--version] [--help] [polecenie [początkowe-argumenty]]\n"
-
-#~ msgid "Success"
@@ -129,6 +218,18 @@
-#~ msgid "No previous regular expression"
-#~ msgstr "Brak poprzedniego wyrażenia regularnego"
-
+-#~ msgid "Predicate List:\n"
+-#~ msgstr "Lista wyrażeń:\n"
+-
+-#~ msgid "Eval Tree:\n"
+-#~ msgstr "Drzewo dopasowujące:\n"
+-
+-#~ msgid "Optimized Eval Tree:\n"
+-#~ msgstr "Zoptymalizowane drzewo dopasowujące:\n"
+-
+-#~ msgid "Optimized command line:\n"
+-#~ msgstr "Zoptymalizowana linia poleceń:\n"
+-
-#~ msgid ""
-#~ "actions: -exec COMMAND ; -fprint FILE -fprint0 FILE -fprintf FILE FORMAT\n"
-#~ " -fls FILE -ok COMMAND ; -print -print0 -printf FORMAT -prune -ls -"
@@ -138,3 +239,27 @@
-#~ "akcje: -exec POLECENIE ; -fprint PLIK -fprint0 PLIK -fprintf PLIK FORMAT\n"
-#~ " -fls PLIK -ok POLECENIE ; -print -print0 -printf FORMAT -prune -ls\n"
-#~ " -delete -quit\n"
+-
+-#~ msgid "virtual memory exhausted"
+-#~ msgstr "pamięć wirtualna wyczerpana"
+-
+-#~ msgid "inserting %s\n"
+-#~ msgstr "wstawianie %s\n"
+-
+-#~ msgid " type: %s %s "
+-#~ msgstr " typ: %s %s "
+-
+-#~ msgid "left:\n"
+-#~ msgstr "lewy:\n"
+-
+-#~ msgid "right:\n"
+-#~ msgstr "prawy:\n"
+-
+-#~ msgid "[stat called here] "
+-#~ msgstr "[tutaj wywołano stat] "
+-
+-#~ msgid "[type needed here] "
+-#~ msgstr "[tutaj potrzebny typ] "
+-
+-#~ msgid "Normalized Eval Tree:\n"
+-#~ msgstr "Znormalizowane drzewo dopasowujące:\n"
================================================================
Index: SOURCES/findutils-selinux.patch
diff -u SOURCES/findutils-selinux.patch:1.12 SOURCES/findutils-selinux.patch:1.13
--- SOURCES/findutils-selinux.patch:1.12 Wed Oct 26 00:21:30 2005
+++ SOURCES/findutils-selinux.patch Sun Nov 27 10:29:59 2005
@@ -76,8 +76,8 @@
.PP
A `%' character followed by any other character is discarded (but the
other character is printed).
---- findutils-4.2.25/find/find.c.orig 2005-08-30 09:40:03.000000000 +0200
-+++ findutils-4.2.25/find/find.c 2005-10-25 23:47:22.594687400 +0200
+--- findutils-4.2.26/find/find.c.orig 2005-11-11 08:41:37.000000000 +0100
++++ findutils-4.2.26/find/find.c 2005-11-27 03:32:00.836912296 +0100
@@ -272,11 +272,17 @@
{
case SYMLINK_ALWAYS_DEREF: /* -L */
@@ -106,17 +106,17 @@
options.no_leaf_check = true;
}
-@@ -394,6 +403,9 @@
+@@ -395,6 +404,9 @@
struct predicate *cur_pred;
char *predicate_name; /* Name of predicate being parsed. */
int end_of_leading_options = 0; /* First arg after any -H/-L etc. */
+#ifdef WITH_SELINUX
+ int is_selinux_enabled_flag;
+#endif /* WITH_SELINUX */
- program_name = argv[0];
- const struct parser_table *entry_close, *entry_print, *entry_open;
-@@ -441,6 +453,9 @@
+
+ program_name = argv[0];
+@@ -442,6 +454,9 @@
options.ignore_readdir_race = false;
state.exit_status = 0;
@@ -126,7 +126,7 @@
#if defined(DEBUG_STAT)
options.xstat = debug_stat;
-@@ -537,6 +552,14 @@
+@@ -538,6 +553,14 @@
if (strchr ("-!(),", argv[i][0]) == NULL)
usage (_("paths must precede expression"));
predicate_name = argv[i];
@@ -335,9 +335,9 @@
last_pred->pred_next = NULL;
last_pred->pred_left = NULL;
last_pred->pred_right = NULL;
---- findutils-4.2.25/po/pl.po.orig 2005-10-25 23:46:10.482650096 +0200
-+++ findutils-4.2.25/po/pl.po 2005-10-26 00:00:02.716131376 +0200
-@@ -132,6 +132,11 @@
+--- findutils-4.2.26/po/pl.po.orig 2005-11-27 03:31:21.302922376 +0100
++++ findutils-4.2.26/po/pl.po 2005-11-27 03:33:03.122443456 +0100
+@@ -151,6 +151,11 @@
msgid "paths must precede expression"
msgstr "ścieżki muszą poprzedzać wyrażenie"
@@ -346,10 +346,10 @@
+msgid "Error: invalid predicate %s: the kernel is not SELinux-enabled.\n"
+msgstr "Błąd: błędne wyrażenie %s: jądro nie ma włączonej obsługi SELinuksa.\n"
+
- #: find/find.c:544
+ #: find/find.c:545
#, c-format
msgid "invalid predicate `%s'"
-@@ -338,6 +343,10 @@
+@@ -357,6 +362,10 @@
"w przypadku braku dostępu do WWW, wysyłając pocztę elektroniczną pod\n"
"adres <bug-findutils at gnu.org>."
================================================================
---- CVS-web:
http://cvs.pld-linux.org/SOURCES/findutils-info.patch?r1=1.5&r2=1.6&f=u
http://cvs.pld-linux.org/SOURCES/findutils-pl.po-update.patch?r1=1.10&r2=1.11&f=u
http://cvs.pld-linux.org/SOURCES/findutils-selinux.patch?r1=1.12&r2=1.13&f=u
More information about the pld-cvs-commit
mailing list