SOURCES: skyeye.conf (NEW) - initial revision

[maciek2w]

Author: maciek2w                     Date: Tue Feb 28 14:26:23 2006 GMT
Module: SOURCES                       Tag: HEAD
---- Log message:
- initial revision

---- Files affected:
SOURCES:
   skyeye.conf (NONE -> 1.1)  (NEW)

---- Diffs:

================================================================
Index: SOURCES/skyeye.conf
diff -u /dev/null SOURCES/skyeye.conf:1.1
--- /dev/null	Tue Feb 28 15:26:23 2006
+++ SOURCES/skyeye.conf	Tue Feb 28 15:26:18 2006
@@ -0,0 +1,71 @@
+#--------------------------------------------------------------------------------
+# memmap.conf and skyeye.conf are all skyeye's hareware coinfigure files.
+# memmap.conf is for skyeye-v0.2.5-
+# skyeye.conf is for skyeye-v0.2.5+
+# usually you needn't to chang them.
+# for example, a AT91's configure file is shown below:
+#--------------------------------------------------------------------------------
+# below is the cpu config info
+# cpu maybe arm7tdmi or arm720t
+cpu: arm7tdmi 
+#--------------------------------------------------------------------------------
+# below is the machine(develop board) config info
+# machine(develop board) maybe at91 or ep7312
+mach: at91 
+#-------------------------------------------------------------------------------
+#NOTICE: this parameter is useless for skyeye-V0.3.1+
+# have 7 memory bank (include RAM, ROM, mapped IO space)
+# below is the memory config info
+mem_num: 7 
+# map=M means ram/rom, map=I means mapped IO space, 
+# type=RW means can be read or written, 
+# type=R means read only, 
+# addr=0x..... means the mem bank's beginning address, 
+# size=0x..... means the mem bank's memory size,  
+# file=... is the filesystem image file, used for uclinux4skyeye or armlinux4skyeye 
+mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000 
+mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000 
+mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=./boot.rom 
+mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000 
+mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000 
+mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000 
+mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000 
+#now, add more options on mem_bank
+mem_bank: map=M, type=RW, addr=0x10000000, size=0x00000800, file=./loader.bin,boot=yes
+#start binary program at 0x100000000
+#----------------------------------------------------------------------------------
+# below is the net config info
+# state=on/off means simulated NIC is wired or not, 
+# mac=.... means the mac addr in simulated NIC, 
+# ethmod=tuntap/vnet means the virtual driver used in host evnironment,
+# hostip=... means the ip address in host environment to interactive with skyeye.
+# format: state=on/off mac=xx:xx:xx:xx:xx:xx ethmod=tuntap/vnet hostip=dd.dd.dd.dd 
+# *********NOTICE**********
+#If you run two more skyeyes at the same time,
+# please use different skyeye.conf for each skyeye instance, and only one
+# skyeye run first and related skyeye.conf content has hostip value:
+#     ......
+#     net: ... ethmod=vnet, hostip=ddd.ddd.ddd.ddd
+#  other skyeye.conf should has content(hostip[0] should be 0):
+#     ......
+#     net: ... ethmod=vnet, hostip=0.ddd.ddd.ddd
+net: state=on, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1
+#------------------------------------------------------------------------------------
+#uart: use it to read/write characters in another terminal
+#now you can use them to connect real serial port.
+#you can add an option to skyeye.conf as below:
+uart: fd_in=/dev/ttyS0, fd_out=/dev/ttyS0
+#then use a terminal connect host's COM1, you can see the output in the terminal.
+#-----------------------------------------------------------------------------------
+#add log parameter which is used to recode the instr. flow and regs when
+#program are running.
+log: logon=0, logfile=/tmp/sk1.log, start=100000, end=200000
+#logon = 0 or 1 0:doesn't log, 1 do log
+#logfile: the filename which have the log info
+#start: the start point of instruction flow to log, should >=0
+#end:   the end   point of instructio flow to log
+
+#-----------------------------------------------------------------
+# below is the lcd config info
+# state=on/off means simulated LCD is wired or not
+lcd: state=on
================================================================