SOURCES: hostapd-build-time-config.patch (NEW) - build time .confi...

[mguevara]

Author: mguevara                     Date: Tue Apr 11 11:34:44 2006 GMT
Module: SOURCES                       Tag: HEAD
---- Log message:
- build time .config for hostapd 0.5.2 (0.4.8 probably too)

---- Files affected:
SOURCES:
   hostapd-build-time-config.patch (NONE -> 1.1)  (NEW)

---- Diffs:

================================================================
Index: SOURCES/hostapd-build-time-config.patch
diff -u /dev/null SOURCES/hostapd-build-time-config.patch:1.1
--- /dev/null	Tue Apr 11 13:34:44 2006
+++ SOURCES/hostapd-build-time-config.patch	Tue Apr 11 13:34:39 2006
@@ -0,0 +1,87 @@
+--- /dev/null	2005-11-22 16:20:48.000000000 +0100
++++ hostapd-0.5.2/.config	2006-04-11 13:13:18.000000000 +0200
+@@ -0,0 +1,84 @@
++# Example hostapd build time configuration
++#
++# This file lists the configuration options that are used when building the
++# hostapd binary. All lines starting with # are ignored. Configuration option
++# lines must be commented out complete, if they are not to be included, i.e.,
++# just setting VARIABLE=n is not disabling that variable.
++#
++# This file is included in Makefile, so variables like CFLAGS and LIBS can also
++# be modified from here. In most cass, these lines should use += in order not
++# to override previous values of the variables.
++
++# Driver interface for Host AP driver
++CONFIG_DRIVER_HOSTAP=y
++
++# Driver interface for wired authenticator
++#CONFIG_DRIVER_WIRED=y
++
++# Driver interface for madwifi driver
++CONFIG_DRIVER_MADWIFI=y
++CFLAGS += -I/usr/include/madwifi # change to reflect local setup; directory for madwifi src
++
++# Driver interface for Prism54 driver
++CONFIG_DRIVER_PRISM54=y
++
++# Driver interface for drivers using Devicescape IEEE 802.11 stack
++#CONFIG_DRIVER_DEVICESCAPE=y
++
++# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
++#CONFIG_DRIVER_BSD=y
++#CFLAGS += -I/usr/local/include
++#LIBS += -L/usr/local/lib
++
++# IEEE 802.11F/IAPP
++CONFIG_IAPP=y
++
++# WPA2/IEEE 802.11i RSN pre-authentication
++CONFIG_RSN_PREAUTH=y
++
++# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
++CONFIG_STAKEY=y
++
++# Integrated EAP server
++CONFIG_EAP=y
++
++# EAP-MD5 for the integrated EAP server
++CONFIG_EAP_MD5=y
++
++# EAP-TLS for the integrated EAP server
++CONFIG_EAP_TLS=y
++
++# EAP-MSCHAPv2 for the integrated EAP server
++CONFIG_EAP_MSCHAPV2=y
++
++# EAP-PEAP for the integrated EAP server
++CONFIG_EAP_PEAP=y
++
++# EAP-GTC for the integrated EAP server
++CONFIG_EAP_GTC=y
++
++# EAP-TTLS for the integrated EAP server
++CONFIG_EAP_TTLS=y
++
++# EAP-SIM for the integrated EAP server
++CONFIG_EAP_SIM=y
++
++# EAP-AKA for the integrated EAP server
++CONFIG_EAP_AKA=y
++
++# EAP-PAX for the integrated EAP server
++CONFIG_EAP_PAX=y
++
++# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
++#CONFIG_EAP_PSK=y
++
++# PKCS#12 (PFX) support (used to read private key and certificate file from
++# a file that usually has extension .p12 or .pfx)
++CONFIG_PKCS12=y
++
++# RADIUS authentication server. This provides access to the integrated EAP
++# server from external hosts using RADIUS.
++CONFIG_RADIUS_SERVER=y
++
++# Build IPv6 support for RADIUS operations
++CONFIG_IPV6=y
================================================================