SOURCES: d80211_common.h (NEW), d80211_shared.h (NEW), hostapd_ioc...
wiget
wiget at pld-linux.org
Fri May 19 08:12:17 CEST 2006
Author: wiget Date: Fri May 19 06:12:17 2006 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- headers from Devicescape IEEE802.11 stack (used by hostapd.spec)
---- Files affected:
SOURCES:
d80211_common.h (NONE -> 1.1) (NEW), d80211_shared.h (NONE -> 1.1) (NEW), hostapd_ioctl.h (NONE -> 1.1) (NEW)
---- Diffs:
================================================================
Index: SOURCES/d80211_common.h
diff -u /dev/null SOURCES/d80211_common.h:1.1
--- /dev/null Fri May 19 08:12:17 2006
+++ SOURCES/d80211_common.h Fri May 19 08:12:12 2006
@@ -0,0 +1,98 @@
+/*
+ * IEEE 802.11 driver (80211.o) -- hostapd interface
+ * Copyright 2002-2004, Instant802 Networks, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef D80211_COMMON_H
+#define D80211_COMMON_H
+
+#include <linux/types.h>
+
+/*
+ * This is common header information with user space. It is used on all
+ * frames sent to wlan#ap interface.
+ */
+
+#define IEEE80211_FI_VERSION 0x80211001
+
+struct ieee80211_frame_info {
+ u32 version;
+ u32 length;
+ u64 mactime;
+ u64 hosttime;
+ u32 phytype;
+ u32 channel;
+ u32 datarate;
+ u32 antenna;
+ u32 priority;
+ u32 ssi_type;
+ u32 ssi_signal;
+ u32 ssi_noise;
+ u32 preamble;
+ u32 encoding;
+
+ /* Note: this structure is otherwise identical to capture format used
+ * in linux-wlan-ng, but this additional field is used to provide meta
+ * data about the frame to hostapd. This was the easiest method for
+ * providing this information, but this might change in the future. */
+ u32 msg_type;
+} __attribute__ ((packed));
+
+
+enum ieee80211_msg_type {
+ ieee80211_msg_normal = 0,
+ ieee80211_msg_tx_callback_ack = 1,
+ ieee80211_msg_tx_callback_fail = 2,
+ ieee80211_msg_passive_scan = 3,
+ ieee80211_msg_wep_frame_unknown_key = 4,
+ ieee80211_msg_michael_mic_failure = 5,
+ ieee80211_msg_monitor = 6,
+ ieee80211_msg_sta_not_assoc = 7,
+ ieee80211_msg_set_aid_for_sta = 8 /* used by Intersil MVC driver */,
+ ieee80211_msg_key_threshold_notification = 9,
+ ieee80211_msg_radar = 11,
+};
+
+struct ieee80211_msg_set_aid_for_sta {
+ char sta_address[ETH_ALEN];
+ u16 aid;
+};
+
+struct ieee80211_msg_key_notification {
+ int tx_rx_count;
+ char ifname[IFNAMSIZ];
+ u8 addr[ETH_ALEN]; /* ff:ff:ff:ff:ff:ff for broadcast keys */
+};
+
+
+enum ieee80211_phytype {
+ ieee80211_phytype_fhss_dot11_97 = 1,
+ ieee80211_phytype_dsss_dot11_97 = 2,
+ ieee80211_phytype_irbaseband = 3,
+ ieee80211_phytype_dsss_dot11_b = 4,
+ ieee80211_phytype_pbcc_dot11_b = 5,
+ ieee80211_phytype_ofdm_dot11_g = 6,
+ ieee80211_phytype_pbcc_dot11_g = 7,
+ ieee80211_phytype_ofdm_dot11_a = 8,
+ ieee80211_phytype_dsss_dot11_turbog = 255,
+ ieee80211_phytype_dsss_dot11_turbo = 256,
+};
+
+enum ieee80211_ssi_type {
+ ieee80211_ssi_none = 0,
+ ieee80211_ssi_norm = 1, /* normalized, 0-1000 */
+ ieee80211_ssi_dbm = 2,
+ ieee80211_ssi_raw = 3, /* raw SSI */
+};
+
+struct ieee80211_radar_info {
+ int channel;
+ int radar;
+ int radar_type;
+};
+
+#endif /* D80211_COMMON_H */
================================================================
Index: SOURCES/d80211_shared.h
diff -u /dev/null SOURCES/d80211_shared.h:1.1
--- /dev/null Fri May 19 08:12:17 2006
+++ SOURCES/d80211_shared.h Fri May 19 08:12:12 2006
@@ -0,0 +1,50 @@
+/*
+ * IEEE 802.11 -- shared defines for low-level drivers, 80211.o, and hostapd
+ * Copyright 2002-2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef D80211_SHARED_H
+#define D80211_SHARED_H
+
+/* 802.11g is backwards-compatible with 802.11b, so a wlan card can
+ * actually be both in 11b and 11g modes at the same time. */
+enum {
+ MODE_IEEE80211A = 0 /* IEEE 802.11a */,
+ MODE_IEEE80211B = 1 /* IEEE 802.11b only */,
+ MODE_ATHEROS_TURBO = 2 /* Atheros Turbo mode (2x.11a at 5 GHz) */,
+ MODE_IEEE80211G = 3 /* IEEE 802.11g (and 802.11b compatibility) */,
+ MODE_ATHEROS_TURBOG = 4 /* Atheros Turbo mode (2x.11g at 2.4 GHz) */,
+ MODE_ATHEROS_PRIME = 5 /* Atheros Dynamic Turbo mode */,
+ MODE_ATHEROS_PRIMEG = 6 /* Atheros Dynamic Turbo mode G */,
+ MODE_ATHEROS_XR = 7 /* Atheros XR mode */,
+ NUM_IEEE80211_MODES = 8
+};
+
+#define IEEE80211_CHAN_W_SCAN 0x00000001
+#define IEEE80211_CHAN_W_ACTIVE_SCAN 0x00000002
+#define IEEE80211_CHAN_W_IBSS 0x00000004
+
+/* Low-level driver should set PREAMBLE2, OFDM, CCK, and TURBO flags.
+ * BASIC, SUPPORTED, ERP, and MANDATORY flags are set in 80211.o based on the
+ * configuration. */
+#define IEEE80211_RATE_ERP 0x00000001
+#define IEEE80211_RATE_BASIC 0x00000002
+#define IEEE80211_RATE_PREAMBLE2 0x00000004
+#define IEEE80211_RATE_SUPPORTED 0x00000010
+#define IEEE80211_RATE_OFDM 0x00000020
+#define IEEE80211_RATE_CCK 0x00000040
+#define IEEE80211_RATE_TURBO 0x00000080
+#define IEEE80211_RATE_MANDATORY 0x00000100
+#define IEEE80211_RATE_XR 0x00000200
+
+#define IEEE80211_RATE_CCK_2 (IEEE80211_RATE_CCK | IEEE80211_RATE_PREAMBLE2)
+#define IEEE80211_RATE_MODULATION(f) \
+(f & (IEEE80211_RATE_CCK | IEEE80211_RATE_OFDM))
+
+
+#endif /* D80211_SHARED_H */
================================================================
Index: SOURCES/hostapd_ioctl.h
diff -u /dev/null SOURCES/hostapd_ioctl.h:1.1
--- /dev/null Fri May 19 08:12:17 2006
+++ SOURCES/hostapd_ioctl.h Fri May 19 08:12:12 2006
@@ -0,0 +1,436 @@
+/*
+ * Host AP (software wireless LAN access point) user space daemon for
+ * Host AP kernel driver
+ * Copyright 2002-2003, Jouni Malinen <jkmaline at cc.hut.fi>
+ * Copyright 2002-2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef HOSTAPD_IOCTL_H
+#define HOSTAPD_IOCTL_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif /* __KERNEL__ */
+
+#define PRISM2_IOCTL_PRISM2_PARAM (SIOCIWFIRSTPRIV + 0)
+#define PRISM2_IOCTL_GET_PRISM2_PARAM (SIOCIWFIRSTPRIV + 1)
+#define PRISM2_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 3)
+#define PRISM2_IOCTL_TEST_PARAM (SIOCIWFIRSTPRIV + 4)
+
+/* PRISM2_IOCTL_PRISM2_PARAM ioctl() subtypes: */
+enum {
+ PRISM2_PARAM_PTYPE = 1,
+ PRISM2_PARAM_TXRATECTRL = 2,
+ PRISM2_PARAM_BEACON_INT = 3,
+ PRISM2_PARAM_PSEUDO_IBSS = 4,
+ PRISM2_PARAM_ALC = 5,
+ PRISM2_PARAM_TXPOWER = 6,
+ PRISM2_PARAM_DUMP = 7,
+ PRISM2_PARAM_OTHER_AP_POLICY = 8,
+ PRISM2_PARAM_AP_MAX_INACTIVITY = 9,
+ PRISM2_PARAM_AP_BRIDGE_PACKETS = 10,
+ PRISM2_PARAM_DTIM_PERIOD = 11,
+ PRISM2_PARAM_AP_NULLFUNC_ACK = 12,
+ PRISM2_PARAM_MAX_WDS = 13,
+ PRISM2_PARAM_AP_AUTOM_AP_WDS = 14,
+ PRISM2_PARAM_AP_AUTH_ALGS = 15,
+ PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16,
+ PRISM2_PARAM_HOST_ENCRYPT = 17,
+ PRISM2_PARAM_HOST_DECRYPT = 18,
+ PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19,
+ PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20,
+ PRISM2_PARAM_HOST_ROAMING = 21,
+ PRISM2_PARAM_BCRX_STA_KEY = 22,
+ PRISM2_PARAM_IEEE_802_1X = 23,
+ PRISM2_PARAM_ANTSEL_TX = 24,
+ PRISM2_PARAM_ANTSEL_RX = 25,
+ PRISM2_PARAM_MONITOR_TYPE = 26,
+ PRISM2_PARAM_WDS_TYPE = 27,
+ PRISM2_PARAM_HOSTSCAN = 28,
+ PRISM2_PARAM_AP_SCAN = 29,
+
+ /* Instant802 additions */
+ PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES = 1001,
+ PRISM2_PARAM_DROP_UNENCRYPTED = 1002,
+ PRISM2_PARAM_PREAMBLE = 1003,
+ PRISM2_PARAM_RATE_LIMIT = 1004,
+ PRISM2_PARAM_RATE_LIMIT_BURST = 1005,
+ PRISM2_PARAM_SHORT_SLOT_TIME = 1006,
+ PRISM2_PARAM_TEST_MODE = 1007,
+ PRISM2_PARAM_NEXT_MODE = 1008,
+ PRISM2_PARAM_CLEAR_KEYS = 1009,
+ PRISM2_PARAM_RADIO_ENABLED = 1010,
+ PRISM2_PARAM_ANTENNA_SEL = 1011,
+ PRISM2_PARAM_CALIB_INT = 1012,
+ PRISM2_PARAM_ANTENNA_MODE = 1013,
+ PRISM2_PARAM_PRIVACY_INVOKED = 1014,
+ PRISM2_PARAM_BROADCAST_SSID = 1015,
+ PRISM2_PARAM_STAT_TIME = 1016,
+ PRISM2_PARAM_STA_ANTENNA_SEL = 1017,
+ PRISM2_PARAM_FORCE_UNICAST_RATE = 1018,
+ PRISM2_PARAM_RATE_CTRL_NUM_UP = 1019,
+ PRISM2_PARAM_RATE_CTRL_NUM_DOWN = 1020,
+ PRISM2_PARAM_MAX_RATECTRL_RATE = 1021,
+ PRISM2_PARAM_TX_POWER_REDUCTION = 1022,
+ PRISM2_PARAM_EAPOL = 1023,
+ PRISM2_PARAM_KEY_TX_RX_THRESHOLD = 1024,
+ PRISM2_PARAM_KEY_INDEX = 1025,
+ PRISM2_PARAM_DEFAULT_WEP_ONLY = 1026,
+ PRISM2_PARAM_WIFI_WME_NOACK_TEST = 1033,
+ PRISM2_PARAM_ALLOW_BROADCAST_ALWAYS = 1034,
+ PRISM2_PARAM_SCAN_FLAGS = 1035,
+ PRISM2_PARAM_HW_MODES = 1036,
+ PRISM2_PARAM_CREATE_IBSS = 1037,
+ PRISM2_PARAM_WMM_ENABLED = 1038,
+ PRISM2_PARAM_MIXED_CELL = 1039,
+ PRISM2_PARAM_KEY_MGMT = 1040,
+ PRISM2_PARAM_RADAR_DETECT = 1043,
+ PRISM2_PARAM_SPECTRUM_MGMT = 1044,
+ /* NOTE: Please try to coordinate with other active development
+ * branches before allocating new param numbers so that each new param
+ * will be unique within all branches and the allocated number will not
+ * need to be changed when merging new features. Existing numbers in
+ * the mainline (or main devel branch) must not be changed when merging
+ * in new features. */
+};
+
+/* PRISM2_IOCTL_HOSTAPD ioctl() cmd: */
+enum {
+ PRISM2_HOSTAPD_FLUSH = 1,
+ PRISM2_HOSTAPD_ADD_STA = 2,
+ PRISM2_HOSTAPD_REMOVE_STA = 3,
+ PRISM2_HOSTAPD_GET_INFO_STA = 4,
+ /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
+ PRISM2_SET_ENCRYPTION = 6,
+ PRISM2_GET_ENCRYPTION = 7,
+ PRISM2_HOSTAPD_SET_FLAGS_STA = 8,
+ PRISM2_HOSTAPD_GET_RID = 9,
+ PRISM2_HOSTAPD_SET_RID = 10,
+ PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
+ PRISM2_HOSTAPD_MLME = 13,
+
+ /* Instant802 additions */
+ PRISM2_HOSTAPD_SET_BEACON = 1001,
+ PRISM2_HOSTAPD_GET_HW_FEATURES = 1002,
+ PRISM2_HOSTAPD_SCAN = 1003,
+ PRISM2_HOSTAPD_WPA_TRIGGER = 1004,
+ PRISM2_HOSTAPD_SET_RATE_SETS = 1005,
+ PRISM2_HOSTAPD_ADD_IF = 1006,
+ PRISM2_HOSTAPD_REMOVE_IF = 1007,
+ PRISM2_HOSTAPD_GET_DOT11COUNTERSTABLE = 1008,
+ PRISM2_HOSTAPD_GET_LOAD_STATS = 1009,
+ PRISM2_HOSTAPD_SET_STA_VLAN = 1010,
+ PRISM2_HOSTAPD_SET_GENERIC_INFO_ELEM = 1011,
+ PRISM2_HOSTAPD_SET_CHANNEL_FLAG = 1012,
+ PRISM2_HOSTAPD_SET_REGULATORY_DOMAIN = 1013,
+ PRISM2_HOSTAPD_SET_TX_QUEUE_PARAMS = 1014,
+ PRISM2_HOSTAPD_GET_TX_STATS = 1016,
+ PRISM2_HOSTAPD_UPDATE_IF = 1017,
+ PRISM2_HOSTAPD_SCAN_REQ = 1019,
+ PRISM2_STA_GET_STATE = 1020,
+ PRISM2_HOSTAPD_FLUSH_IFS = 1021,
+ PRISM2_HOSTAPD_SET_RADAR_PARAMS = 1023,
+ PRISM2_HOSTAPD_SET_QUIET_PARAMS = 1024,
+ PRISM2_HOSTAPD_GET_TX_POWER = 1025,
+ /* NOTE: Please try to coordinate with other active development
+ * branches before allocating new param numbers so that each new param
+ * will be unique within all branches and the allocated number will not
+ * need to be changed when merging new features. Existing numbers in
+ * the mainline (or main devel branch) must not be changed when merging
+ * in new features. */
+};
+
+ /* these definitions mirror the ieee80211_i.h
+ * IEEE80211_DISABLED, ... IEEE80211_ASSOCIATED enumeration */
+enum {
+ PRISM2_PARAM_STA_DISABLED,
+ PRISM2_PARAM_STA_AUTHENTICATE,
+ PRISM2_PARAM_STA_ASSOCIATE,
+ PRISM2_PARAM_STA_ASSOCIATED,
+};
+
+#define PRISM2_HOSTAPD_MAX_BUF_SIZE 2048
+#define HOSTAP_CRYPT_ALG_NAME_LEN 16
+
+/* Use this to make sure that structure elements are correctly aligned
+ * for access as other types. Most commonly, this affects the placeholder
+ * types used for data at the end of a structure in this union.
+ */
+#ifdef __GNUC__
+#undef ALIGNED
+#define ALIGNED __attribute__ ((aligned))
+#else
+/* Check if it has been defined elsewhere */
+#ifndef ALIGNED
+#error "Must define ALIGNED to generate aligned structure elements"
+#endif
+#endif
+
+struct prism2_hostapd_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ u8 pad[2];
+ union {
+ struct {
+ u16 aid;
+ u16 capability;
+ u8 supp_rates[32];
+ /* atheros_super_ag and enc_flags are only used with
+ * IEEE80211_ATHEROS_SUPER_AG
+ */
+ u8 atheros_super_ag;
+ u8 atheros_xr_mode;
+ u8 wds_flags;
+#define IEEE80211_STA_DYNAMIC_ENC BIT(0)
+ u8 enc_flags;
+ } add_sta;
+ struct {
+ u32 inactive_msec;
+ u32 rx_packets;
+ u32 tx_packets;
+ u32 rx_bytes;
+ u32 tx_bytes;
+ u32 current_tx_rate; /* in 100 kbps */
+ u32 channel_use;
+ u32 flags;
+ u32 num_ps_buf_frames;
+ u32 tx_retry_failed;
+ u32 tx_retry_count;
+ u32 last_rssi;
+ u32 last_ack_rssi;
+ } get_info_sta;
+ struct {
+ u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN];
+ u32 flags;
+ u32 err;
+ u8 idx;
+#define HOSTAP_SEQ_COUNTER_SIZE 8
+ u8 seq_counter[HOSTAP_SEQ_COUNTER_SIZE];
+ u16 key_len;
+ u8 key[0] ALIGNED;
+ } crypt;
+ struct {
+ u32 flags_and;
+ u32 flags_or;
+ } set_flags_sta;
+ struct {
+ u16 rid;
+ u16 len;
+ u8 data[0] ALIGNED;
+ } rid;
+ struct {
+ u16 head_len;
+ u16 tail_len;
+ u8 data[0] ALIGNED; /* head_len + tail_len bytes */
+ } beacon;
+ struct {
+ u16 num_modes;
+ u16 flags;
+ u8 data[0] ALIGNED; /* num_modes * feature data */
+ } hw_features;
+ struct {
+ u8 now;
+ s8 our_mode_only;
+ s16 last_rx;
+ u16 channel;
+ s16 interval; /* seconds */
+ s32 listen; /* microseconds */
+ } scan;
+ struct {
+#define WPA_TRIGGER_FAIL_TX_MIC BIT(0)
+#define WPA_TRIGGER_FAIL_TX_ICV BIT(1)
+#define WPA_TRIGGER_FAIL_RX_MIC BIT(2)
+#define WPA_TRIGGER_FAIL_RX_ICV BIT(3)
+#define WPA_TRIGGER_TX_REPLAY BIT(4)
+#define WPA_TRIGGER_TX_REPLAY_FRAG BIT(5)
+#define WPA_TRIGGER_TX_SKIP_SEQ BIT(6)
+ u32 trigger;
+ } wpa_trigger;
+ struct {
+ u16 mode; /* MODE_* */
+ u16 num_supported_rates;
+ u16 num_basic_rates;
+ u8 data[0] ALIGNED; /* num_supported_rates * u16 +
+ * num_basic_rates * u16 */
+ } set_rate_sets;
+ struct {
+ u8 type; /* WDS, VLAN, etc */
+ u8 name[IFNAMSIZ];
+ u8 data[0] ALIGNED;
+ } if_info;
+ struct dot11_counters {
+ u32 dot11TransmittedFragmentCount;
+ u32 dot11MulticastTransmittedFrameCount;
+ u32 dot11FailedCount;
+ u32 dot11ReceivedFragmentCount;
+ u32 dot11MulticastReceivedFrameCount;
+ u32 dot11FCSErrorCount;
+ u32 dot11TransmittedFrameCount;
+ u32 dot11WEPUndecryptableCount;
+ u32 dot11ACKFailureCount;
+ u32 dot11RTSFailureCount;
+ u32 dot11RTSSuccessCount;
+ } dot11CountersTable;
+ struct {
+#define LOAD_STATS_CLEAR BIT(1)
+ u32 flags;
+ u32 channel_use;
+ } get_load_stats;
+ struct {
+ char vlan_name[IFNAMSIZ];
+ int vlan_id;
+ } set_sta_vlan;
+ struct {
+ u8 len;
+ u8 data[0] ALIGNED;
+ } set_generic_info_elem;
+ struct {
+ u16 mode; /* MODE_* */
+ u16 chan;
+ u32 flag;
+ u8 power_level; /* regulatory limit in dBm */
+ u8 antenna_max;
+ } set_channel_flag;
+ struct {
+ u32 rd;
+ } set_regulatory_domain;
+ struct {
+ u32 queue;
+ s32 aifs;
+ u32 cw_min;
+ u32 cw_max;
+ u32 burst_time; /* maximum burst time in 0.1 ms, i.e.,
+ * 10 = 1 ms */
+ } tx_queue_params;
+ struct {
+ u32 bss_count;
+ u8 bssid_mask[ETH_ALEN];
+ } set_bss;
+ struct ieee80211_tx_stats {
+ struct {
+ unsigned int len; /* num packets in queue */
+ unsigned int limit; /* queue len (soft) limit
+ */
+ unsigned int count; /* total num frames sent */
+ } data[4];
+ } get_tx_stats;
+ struct {
+ u8 ssid_len;
+ u8 ssid[0] ALIGNED;
+ } scan_req;
+ struct {
+ u32 state;
+ } sta_get_state;
+ struct {
+#define MLME_STA_DEAUTH 0
+#define MLME_STA_DISASSOC 1
+ u16 cmd;
+ u16 reason_code;
+ } mlme;
+ struct {
+ u8 radar_firpwr_threshold;
+ u8 radar_rssi_threshold;
+ u8 pulse_height_threshold;
+ u8 pulse_rssi_threshold;
+ u8 pulse_inband_threshold;
+ } radar;
+ struct {
+ unsigned int period;
+ unsigned int offset;
+ unsigned int duration;
+ } quiet;
+ struct {
+ unsigned int tx_power_min;
+ unsigned int tx_power_max;
+ } tx_power;
+ struct {
+ u8 dummy[80]; /* Make sizeof() this struct large enough
+ * with some compiler versions. */
+ } dummy;
+ } u;
+};
+
+
+#ifndef IEEE80211_TX_QUEUE_NUMS
+#define IEEE80211_TX_QUEUE_NUMS
+/* TODO: these need to be synchronized with ieee80211.h; make a shared header
+ * file that can be included into low-level drivers, 80211.o, and hostapd */
+/* tx_queue_params - queue */
+enum {
+ IEEE80211_TX_QUEUE_DATA0 = 0, /* used for EDCA AC_VO data */
+ IEEE80211_TX_QUEUE_DATA1 = 1, /* used for EDCA AC_VI data */
+ IEEE80211_TX_QUEUE_DATA2 = 2, /* used for EDCA AC_BE data */
+ IEEE80211_TX_QUEUE_DATA3 = 3, /* used for EDCA AC_BK data */
+ IEEE80211_TX_QUEUE_DATA4 = 4,
+ IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
+ IEEE80211_TX_QUEUE_BEACON = 7
+};
+#endif /* IEEE80211_TX_QUEUE_NUMS */
+
+
+#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT(0)
+#define HOSTAP_CRYPT_FLAG_PERMANENT BIT(1)
+
+#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2
+#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3
+#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5
+#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7
+
+#define HOSTAP_HW_FLAG_NULLFUNC_OK BIT(0)
+
+enum {
+ IEEE80211_KEY_MGMT_NONE = 0,
+ IEEE80211_KEY_MGMT_IEEE8021X = 1,
+ IEEE80211_KEY_MGMT_WPA_PSK = 2,
+ IEEE80211_KEY_MGMT_WPA_EAP = 3,
+};
+
+
+/* Data structures used for get_hw_features ioctl */
+struct hostapd_ioctl_hw_modes_hdr {
+ int mode;
+ int num_channels;
+ int num_rates;
+};
+
+struct ieee80211_channel_data {
+ short chan; /* channel number (IEEE 802.11) */
+ short freq; /* frequency in MHz */
+ int flag; /* flag for hostapd use (IEEE80211_CHAN_*) */
+};
+
+struct ieee80211_rate_data {
+ int rate; /* rate in 100 kbps */
+ int flags; /* IEEE80211_RATE_ flags */
+};
+
+
+/* ADD_IF, REMOVE_IF, and UPDATE_IF 'type' argument */
+enum {
+ HOSTAP_IF_WDS = 1, HOSTAP_IF_VLAN = 2, HOSTAP_IF_BSS = 3,
+ HOSTAP_IF_STA = 4
+};
+
+struct hostapd_if_wds {
+ u8 remote_addr[ETH_ALEN];
+};
+
+struct hostapd_if_vlan {
+ u8 id;
+};
+
+struct hostapd_if_bss {
+ u8 bssid[ETH_ALEN];
+};
<<Diff was trimmed, longer than 597 lines>>
More information about the pld-cvs-commit
mailing list