SOURCES: kernel-bcm43xx-2.6.20_combined.patch (NEW) - bcm43xx fixe...
matkor
matkor at pld-linux.org
Mon Feb 5 18:18:52 CET 2007
Author: matkor Date: Mon Feb 5 17:18:52 2007 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- bcm43xx fixes which did not make for 2.6.20 added. Work for me. Scheduled to 2.6.20.1/2.6.21.
---- Files affected:
SOURCES:
kernel-bcm43xx-2.6.20_combined.patch (NONE -> 1.1) (NEW)
---- Diffs:
================================================================
Index: SOURCES/kernel-bcm43xx-2.6.20_combined.patch
diff -u /dev/null SOURCES/kernel-bcm43xx-2.6.20_combined.patch:1.1
--- /dev/null Mon Feb 5 18:18:52 2007
+++ SOURCES/kernel-bcm43xx-2.6.20_combined.patch Mon Feb 5 18:18:47 2007
@@ -0,0 +1,558 @@
+
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+@@ -145,16 +145,14 @@ dma_addr_t map_descbuffer(struct bcm43xx
+ int tx)
+ {
+ dma_addr_t dmaaddr;
++ int direction = PCI_DMA_FROMDEVICE;
+
+- if (tx) {
+- dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
+- buf, len,
+- DMA_TO_DEVICE);
+- } else {
+- dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
++ if (tx)
++ direction = PCI_DMA_TODEVICE;
++
++ dmaaddr = pci_map_single(ring->bcm->pci_dev,
+ buf, len,
+- DMA_FROM_DEVICE);
+- }
++ direction);
+
+ return dmaaddr;
+ }
+@@ -166,13 +164,13 @@ void unmap_descbuffer(struct bcm43xx_dma
+ int tx)
+ {
+ if (tx) {
+- dma_unmap_single(&ring->bcm->pci_dev->dev,
++ pci_unmap_single(ring->bcm->pci_dev,
+ addr, len,
+- DMA_TO_DEVICE);
++ PCI_DMA_TODEVICE);
+ } else {
+- dma_unmap_single(&ring->bcm->pci_dev->dev,
++ pci_unmap_single(ring->bcm->pci_dev,
+ addr, len,
+- DMA_FROM_DEVICE);
++ PCI_DMA_FROMDEVICE);
+ }
+ }
+
+@@ -183,8 +181,8 @@ void sync_descbuffer_for_cpu(struct bcm4
+ {
+ assert(!ring->tx);
+
+- dma_sync_single_for_cpu(&ring->bcm->pci_dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
++ addr, len, PCI_DMA_FROMDEVICE);
+ }
+
+ static inline
+@@ -194,8 +192,8 @@ void sync_descbuffer_for_device(struct b
+ {
+ assert(!ring->tx);
+
+- dma_sync_single_for_device(&ring->bcm->pci_dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
++ addr, len, PCI_DMA_TODEVICE);
+ }
+
+ /* Unmap and free a descriptor buffer. */
+@@ -214,17 +212,53 @@ void free_descriptor_buffer(struct bcm43
+
+ static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
+ {
+- struct device *dev = &(ring->bcm->pci_dev->dev);
+-
+- ring->descbase = dma_alloc_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
+- &(ring->dmabase), GFP_KERNEL);
++ ring->descbase = pci_alloc_consistent(ring->bcm->pci_dev, BCM43xx_DMA_RINGMEMSIZE,
++ &(ring->dmabase));
+ if (!ring->descbase) {
+- printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
+- return -ENOMEM;
++ /* Allocation may have failed due to pci_alloc_consistent
++ insisting on use of GFP_DMA, which is more restrictive
++ than necessary... */
++ struct dma_desc *rx_ring;
++ dma_addr_t rx_ring_dma;
++
++ rx_ring = kzalloc(BCM43xx_DMA_RINGMEMSIZE, GFP_KERNEL);
++ if (!rx_ring)
++ goto out_err;
++
++ rx_ring_dma = pci_map_single(ring->bcm->pci_dev, rx_ring,
++ BCM43xx_DMA_RINGMEMSIZE,
++ PCI_DMA_BIDIRECTIONAL);
++
++ if (pci_dma_mapping_error(rx_ring_dma) ||
++ rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
++ /* Sigh... */
++ if (!pci_dma_mapping_error(rx_ring_dma))
++ pci_unmap_single(ring->bcm->pci_dev,
++ rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
++ PCI_DMA_BIDIRECTIONAL);
++ rx_ring_dma = pci_map_single(ring->bcm->pci_dev,
++ rx_ring, BCM43xx_DMA_RINGMEMSIZE,
++ PCI_DMA_BIDIRECTIONAL);
++ if (pci_dma_mapping_error(rx_ring_dma) ||
++ rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
++ assert(0);
++ if (!pci_dma_mapping_error(rx_ring_dma))
++ pci_unmap_single(ring->bcm->pci_dev,
++ rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
++ PCI_DMA_BIDIRECTIONAL);
++ goto out_err;
++ }
++ }
++
++ ring->descbase = rx_ring;
++ ring->dmabase = rx_ring_dma;
+ }
+ memset(ring->descbase, 0, BCM43xx_DMA_RINGMEMSIZE);
+
+ return 0;
++out_err:
++ printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
++ return -ENOMEM;
+ }
+
+ static void free_ringmemory(struct bcm43xx_dmaring *ring)
+@@ -407,6 +441,29 @@ static int setup_rx_descbuffer(struct bc
+ if (unlikely(!skb))
+ return -ENOMEM;
+ dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
++ /* This hardware bug work-around adapted from the b44 driver.
++ The chip may be unable to do PCI DMA to/from anything above 1GB */
++ if (pci_dma_mapping_error(dmaaddr) ||
++ dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
++ /* This one has 30-bit addressing... */
++ if (!pci_dma_mapping_error(dmaaddr))
++ pci_unmap_single(ring->bcm->pci_dev,
++ dmaaddr, ring->rx_buffersize,
++ PCI_DMA_FROMDEVICE);
++ dev_kfree_skb_any(skb);
++ skb = __dev_alloc_skb(ring->rx_buffersize,GFP_DMA);
++ if (skb == NULL)
++ return -ENOMEM;
++ dmaaddr = pci_map_single(ring->bcm->pci_dev,
++ skb->data, ring->rx_buffersize,
++ PCI_DMA_FROMDEVICE);
++ if (pci_dma_mapping_error(dmaaddr) ||
++ dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
++ assert(0);
++ dev_kfree_skb_any(skb);
++ return -ENOMEM;
++ }
++ }
+ meta->skb = skb;
+ meta->dmaaddr = dmaaddr;
+ skb->dev = ring->bcm->net_dev;
+@@ -636,8 +693,10 @@ struct bcm43xx_dmaring * bcm43xx_setup_d
+ err = dmacontroller_setup(ring);
+ if (err)
+ goto err_free_ringmemory;
++ return ring;
+
+ out:
++ printk(KERN_ERR PFX "Error in bcm43xx_setup_dmaring\n");
+ return ring;
+
+ err_free_ringmemory:
+@@ -705,30 +764,16 @@ int bcm43xx_dma_init(struct bcm43xx_priv
+ struct bcm43xx_dmaring *ring;
+ int err = -ENOMEM;
+ int dma64 = 0;
+- u64 mask = bcm43xx_get_supported_dma_mask(bcm);
+- int nobits;
+
+- if (mask == DMA_64BIT_MASK) {
++ bcm->dma_mask = bcm43xx_get_supported_dma_mask(bcm);
++ if (bcm->dma_mask == DMA_64BIT_MASK)
+ dma64 = 1;
+- nobits = 64;
+- } else if (mask == DMA_32BIT_MASK)
+- nobits = 32;
+- else
+- nobits = 30;
+- err = pci_set_dma_mask(bcm->pci_dev, mask);
+- err |= pci_set_consistent_dma_mask(bcm->pci_dev, mask);
+- if (err) {
+-#ifdef CONFIG_BCM43XX_PIO
+- printk(KERN_WARNING PFX "DMA not supported on this device."
+- " Falling back to PIO.\n");
+- bcm->__using_pio = 1;
+- return -ENOSYS;
+-#else
+- printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
+- "Please recompile the driver with PIO support.\n");
+- return -ENODEV;
+-#endif /* CONFIG_BCM43XX_PIO */
+- }
++ err = pci_set_dma_mask(bcm->pci_dev, bcm->dma_mask);
++ if (err)
++ goto no_dma;
++ err = pci_set_consistent_dma_mask(bcm->pci_dev, bcm->dma_mask);
++ if (err)
++ goto no_dma;
+
+ /* setup TX DMA channels. */
+ ring = bcm43xx_setup_dmaring(bcm, 0, 1, dma64);
+@@ -774,9 +819,12 @@ int bcm43xx_dma_init(struct bcm43xx_priv
+ dma->rx_ring3 = ring;
+ }
+
+- dprintk(KERN_INFO PFX "%d-bit DMA initialized\n", nobits);
++ dprintk(KERN_INFO PFX "%d-bit DMA initialized\n",
++ (bcm->dma_mask == DMA_64BIT_MASK) ? 64 :
++ (bcm->dma_mask == DMA_32BIT_MASK) ? 32 : 30);
+ err = 0;
+ out:
++ if(err)BUG();
+ return err;
+
+ err_destroy_rx0:
+@@ -800,7 +848,18 @@ err_destroy_tx1:
+ err_destroy_tx0:
+ bcm43xx_destroy_dmaring(dma->tx_ring0);
+ dma->tx_ring0 = NULL;
+- goto out;
++no_dma:
++#ifdef CONFIG_BCM43XX_PIO
++ printk(KERN_WARNING PFX "DMA not supported on this device."
++ " Falling back to PIO.\n");
++ bcm->__using_pio = 1;
++ BUG();
++ return -ENOSYS;
++#else
++ printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
++ "Please recompile the driver with PIO support.\n");
++ return -ENODEV;
++#endif /* CONFIG_BCM43XX_PIO */
+ }
+
+ /* Generate a cookie for the TX header. */
+@@ -905,6 +964,7 @@ static void dma_tx_fragment(struct bcm43
+ struct bcm43xx_dmadesc_generic *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+ dma_addr_t dmaaddr;
++ struct sk_buff *bounce_skb;
+
+ assert(skb_shinfo(skb)->nr_frags == 0);
+
+@@ -924,9 +984,28 @@ static void dma_tx_fragment(struct bcm43
+ skb->len - sizeof(struct bcm43xx_txhdr),
+ (cur_frag == 0),
+ generate_cookie(ring, slot));
++ dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
++ if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
++ /* chip cannot handle DMA to/from > 1GB, use bounce buffer (copied from b44 driver) */
++ if (!dma_mapping_error(dmaaddr))
++ unmap_descbuffer(ring, dmaaddr, skb->len, 1);
++ bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC|GFP_DMA);
++ if (!bounce_skb)
++ return;
++ dmaaddr = map_descbuffer(ring, bounce_skb->data, bounce_skb->len, 1);
++ if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
++ if (!dma_mapping_error(dmaaddr))
++ unmap_descbuffer(ring, dmaaddr, skb->len, 1);
++ dev_kfree_skb_any(bounce_skb);
++ assert(0);
++ return;
++ }
++ memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
++ dev_kfree_skb_any(skb);
++ skb = bounce_skb;
++ }
+
+ meta->skb = skb;
+- dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
+ meta->dmaaddr = dmaaddr;
+
+ fill_descriptor(ring, desc, dmaaddr,
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx.h
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
+@@ -21,7 +21,7 @@
+ #define PFX KBUILD_MODNAME ": "
+
+ #define BCM43xx_SWITCH_CORE_MAX_RETRIES 50
+-#define BCM43xx_IRQWAIT_MAX_RETRIES 50
++#define BCM43xx_IRQWAIT_MAX_RETRIES 100
+
+ #define BCM43xx_IO_SIZE 8192
+
+@@ -352,6 +352,10 @@
+ #define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040
+ #define BCM43xx_UCODEFLAG_JAPAN 0x0080
+
++/* Hardware Radio Enable masks */
++#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
++#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
++
+ /* Generic-Interrupt reasons. */
+ #define BCM43xx_IRQ_READY (1 << 0)
+ #define BCM43xx_IRQ_BEACON (1 << 1)
+@@ -758,7 +762,8 @@ struct bcm43xx_private {
+ bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */
+ reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */
+ short_preamble:1, /* TRUE, if short preamble is enabled. */
+- firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
++ firmware_norelease:1, /* Do not release the firmware. Used on suspend. */
++ radio_hw_enable:1; /* TRUE if radio is hardware enabled */
+
+ struct bcm43xx_stats stats;
+
+@@ -766,6 +771,7 @@ struct bcm43xx_private {
+ * This is currently always BCM43xx_BUSTYPE_PCI
+ */
+ u8 bustype;
++ u64 dma_mask;
+
+ u16 board_vendor;
+ u16 board_type;
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.c
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+@@ -2441,6 +2441,9 @@ static int bcm43xx_chip_init(struct bcm4
+ if (err)
+ goto err_gpio_cleanup;
+ bcm43xx_radio_turn_on(bcm);
++ bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
++ dprintk(KERN_INFO PFX "Radio %s by hardware\n",
++ (bcm->radio_hw_enable == 0) ? "disabled" : "enabled");
+
+ bcm43xx_write16(bcm, 0x03E6, 0x0000);
+ err = bcm43xx_phy_init(bcm);
+@@ -3175,9 +3178,24 @@ static void bcm43xx_periodic_every30sec(
+
+ static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
+ {
++ bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
++ //TODO for APHY (temperature?)
++}
++
++static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm)
++{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
++ int radio_hw_enable;
+
++ /* check if radio hardware enabled status changed */
++ radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
++ if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) {
++ bcm->radio_hw_enable = radio_hw_enable;
++ dprintk(KERN_INFO PFX "Radio hardware status changed to %s\n",
++ (radio_hw_enable == 0) ? "disabled" : "enabled");
++ bcm43xx_leds_update(bcm, 0);
++ }
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ //TODO: update_aci_moving_average
+ if (radio->aci_enable && radio->aci_wlan_automatic) {
+@@ -3201,21 +3219,21 @@ static void bcm43xx_periodic_every15sec(
+ //TODO: implement rev1 workaround
+ }
+ }
+- bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
+- //TODO for APHY (temperature?)
+ }
+
+ static void do_periodic_work(struct bcm43xx_private *bcm)
+ {
+- if (bcm->periodic_state % 8 == 0)
++ if (bcm->periodic_state % 120 == 0)
+ bcm43xx_periodic_every120sec(bcm);
+- if (bcm->periodic_state % 4 == 0)
++ if (bcm->periodic_state % 60 == 0)
+ bcm43xx_periodic_every60sec(bcm);
+- if (bcm->periodic_state % 2 == 0)
++ if (bcm->periodic_state % 30 == 0)
+ bcm43xx_periodic_every30sec(bcm);
+- bcm43xx_periodic_every15sec(bcm);
++ if (bcm->periodic_state % 15 == 0)
++ bcm43xx_periodic_every15sec(bcm);
++ bcm43xx_periodic_every1sec(bcm);
+
+- schedule_delayed_work(&bcm->periodic_work, HZ * 15);
++ schedule_delayed_work(&bcm->periodic_work, HZ);
+ }
+
+ static void bcm43xx_periodic_work_handler(struct work_struct *work)
+@@ -3228,7 +3246,7 @@ static void bcm43xx_periodic_work_handle
+ unsigned long orig_trans_start = 0;
+
+ mutex_lock(&bcm->mutex);
+- if (unlikely(bcm->periodic_state % 4 == 0)) {
++ if (unlikely(bcm->periodic_state % 60 == 0)) {
+ /* Periodic work will take a long time, so we want it to
+ * be preemtible.
+ */
+@@ -3260,7 +3278,7 @@ static void bcm43xx_periodic_work_handle
+
+ do_periodic_work(bcm);
+
+- if (unlikely(bcm->periodic_state % 4 == 0)) {
++ if (unlikely(bcm->periodic_state % 60 == 0)) {
+ spin_lock_irqsave(&bcm->irq_lock, flags);
+ tasklet_enable(&bcm->isr_tasklet);
+ bcm43xx_interrupt_enable(bcm, savedirqs);
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
+@@ -65,6 +65,22 @@ void bcm43xx_radio_init2060(struct bcm43
+ void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm);
+ void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm);
+
++static inline
++int bcm43xx_is_hw_radio_enabled(struct bcm43xx_private *bcm)
++{
++ /* function to return state of hardware enable of radio
++ * returns 0 if radio disabled, 1 if radio enabled
++ */
++ if (likely(bcm->current_core->rev >= 3))
++ return ((bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI)
++ & BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK)
++ == 0) ? 1 : 0;
++ else
++ return ((bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO)
++ & BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK)
++ == 0) ? 0 : 1;
++}
++
+ int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel,
+ int synthetic_pu_workaround);
+
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+@@ -26,6 +26,7 @@
+ */
+
+ #include "bcm43xx_leds.h"
++#include "bcm43xx_radio.h"
+ #include "bcm43xx.h"
+
+ #include <asm/bitops.h>
+@@ -108,6 +109,7 @@ static void bcm43xx_led_init_hardcoded(s
+ switch (led_index) {
+ case 0:
+ led->behaviour = BCM43xx_LED_ACTIVITY;
++ led->activelow = 1;
+ if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ)
+ led->behaviour = BCM43xx_LED_RADIO_ALL;
+ break;
+@@ -199,20 +201,21 @@ void bcm43xx_leds_update(struct bcm43xx_
+ turn_on = activity;
+ break;
+ case BCM43xx_LED_RADIO_ALL:
+- turn_on = radio->enabled;
++ turn_on = radio->enabled && bcm43xx_is_hw_radio_enabled(bcm);
+ break;
+ case BCM43xx_LED_RADIO_A:
+ case BCM43xx_LED_BCM4303_2:
+- turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
++ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
++ phy->type == BCM43xx_PHYTYPE_A);
+ break;
+ case BCM43xx_LED_RADIO_B:
+ case BCM43xx_LED_BCM4303_1:
+- turn_on = (radio->enabled &&
++ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
+ (phy->type == BCM43xx_PHYTYPE_B ||
+ phy->type == BCM43xx_PHYTYPE_G));
+ break;
+ case BCM43xx_LED_MODE_BG:
+- if (phy->type == BCM43xx_PHYTYPE_G &&
++ if (phy->type == BCM43xx_PHYTYPE_G && bcm43xx_is_hw_radio_enabled(bcm) &&
+ 1/*FIXME: using G rates.*/)
+ turn_on = 1;
+ break;
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+@@ -1981,6 +1981,7 @@ void bcm43xx_radio_turn_on(struct bcm43x
+ }
+ radio->enabled = 1;
+ dprintk(KERN_INFO PFX "Radio turned on\n");
++ bcm43xx_leds_update(bcm, 0);
+ }
+
+ void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
+@@ -2001,6 +2002,7 @@ void bcm43xx_radio_turn_off(struct bcm43
+ bcm43xx_phy_write(bcm, 0x0015, 0xAA00);
+ radio->enabled = 0;
+ dprintk(KERN_INFO PFX "Radio turned off\n");
++ bcm43xx_leds_update(bcm, 0);
+ }
+
+ void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm)
+Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+===================================================================
+--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
++++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+@@ -261,22 +261,22 @@ static int bcm43xx_wx_get_rangeparams(st
+ if (phy->type == BCM43xx_PHYTYPE_A ||
+ phy->type == BCM43xx_PHYTYPE_G) {
+ range->num_bitrates = 8;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB;
+- range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB * 500000;
++ range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB * 500000;
+ }
+ if (phy->type == BCM43xx_PHYTYPE_B ||
+ phy->type == BCM43xx_PHYTYPE_G) {
+ range->num_bitrates += 4;
+- range->bitrate[i++] = IEEE80211_CCK_RATE_1MB;
+- range->bitrate[i++] = IEEE80211_CCK_RATE_2MB;
+- range->bitrate[i++] = IEEE80211_CCK_RATE_5MB;
+- range->bitrate[i++] = IEEE80211_CCK_RATE_11MB;
++ range->bitrate[i++] = IEEE80211_CCK_RATE_1MB * 500000;
++ range->bitrate[i++] = IEEE80211_CCK_RATE_2MB * 500000;
++ range->bitrate[i++] = IEEE80211_CCK_RATE_5MB * 500000;
++ range->bitrate[i++] = IEEE80211_CCK_RATE_11MB * 500000;
+ }
+
+ geo = ieee80211_get_geo(bcm->ieee);
+@@ -286,7 +286,7 @@ static int bcm43xx_wx_get_rangeparams(st
+ if (j == IW_MAX_FREQUENCIES)
+ break;
+ range->freq[j].i = j + 1;
+- range->freq[j].m = geo->a[i].freq;//FIXME?
++ range->freq[j].m = geo->a[i].freq * 100000;
+ range->freq[j].e = 1;
+ j++;
+ }
+@@ -294,7 +294,7 @@ static int bcm43xx_wx_get_rangeparams(st
+ if (j == IW_MAX_FREQUENCIES)
+ break;
+ range->freq[j].i = j + 1;
+- range->freq[j].m = geo->bg[i].freq;//FIXME?
++ range->freq[j].m = geo->bg[i].freq * 100000;
+ range->freq[j].e = 1;
+ j++;
+ }
================================================================
More information about the pld-cvs-commit
mailing list