SPECS: softflowd.spec (NEW) - init PLD spec

[areq]

Author: areq                         Date: Wed Jun 13 14:33:01 2007 GMT
Module: SPECS                         Tag: HEAD
---- Log message:
- init PLD spec

---- Files affected:
SPECS:
   softflowd.spec (NONE -> 1.1)  (NEW)

---- Diffs:

================================================================
Index: SPECS/softflowd.spec
diff -u /dev/null SPECS/softflowd.spec:1.1
--- /dev/null	Wed Jun 13 16:33:01 2007
+++ SPECS/softflowd.spec	Wed Jun 13 16:32:56 2007
@@ -0,0 +1,79 @@
+# $Revision$, $Date$
+Summary:	Network traffic analyser capable of Cisco NetFlow data export
+Name:		softflowd
+Version:	0.9.8
+Release:	0.1
+License:	BSD
+Group:		Applications/Networking
+Source0:	http://www.mindrot.org/files/softflowd/%{name}-%{version}.tar.gz
+# Source0-md5:	0054d1c80494396cc15edb0a1c7748b1
+Source1:	%{name}.init
+Source2:	%{name}.sysconfig
+URL:		http://www.mindrot.org/projects/softflowd/
+BuildRequires:	autoconf
+BuildRequires:	libtool
+BuildRequires:	rpmbuild(macros) >= 1.228
+Requires(post,preun):	/sbin/chkconfig
+BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+
+%description
+softflowd is a software implementation of a flow-based network traffic
+monitor. softflowd reads network traffic and gathers information about
+active traffic flows. A "traffic flow" is communication between two IP
+addresses or (if the overlying protocol is TCP or UDP) address/port
+tuples. The intended use of softflowd is as a software implementation
+of Cisco's NetFlow traffic account system. softflowd supports data
+export using versions 1, 5 or 9 of the NetFlow protocol.
+
+%prep
+%setup -q
+%build
+%{__gettextize}
+%{__libtoolize}
+%{__aclocal}
+%{__autoconf}
+%{__autoheader}
+%configure
+%{__make}
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+%{__make} install \
+	DESTDIR=$RPM_BUILD_ROOT
+
+install -D %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/softflowd
+install -D %{SOURCE2} $RPM_BUILD_ROOT/etc/sysconfig/softflowd
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post
+/sbin/chkconfig --add %{name}
+%service %{name} restart
+
+%preun
+if [ "$1" = "0" ]; then
+	%service -q %{name} stop
+	/sbin/chkconfig --del %{name}
+fi
+
+%files
+%defattr(644,root,root,755)
+%doc ChangeLog README TODO
+
+%attr(755,root,root) %{_sbindir}/*
+%{_mandir}/man8/*
+
+%attr(754,root,root) /etc/rc.d/init.d/%{name}
+%config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/%{name}
+
+%define date	%(echo `LC_ALL="C" date +"%a %b %d %Y"`)
+%changelog
+* %{date} PLD Team <feedback at pld-linux.org>
+All persons listed below can be reached at <cvs_login>@pld-linux.org
+
+$Log$
+Revision 1.1  2007/06/13 14:32:56  areq
+- init PLD spec
+
================================================================