SOURCES: freenx-node-conf.patch - up for 0.7.3

[aredridel]

Author: aredridel                    Date: Sat Sep 13 18:46:02 2008 GMT
Module: SOURCES                       Tag: HEAD
---- Log message:
- up for 0.7.3

---- Files affected:
SOURCES:
   freenx-node-conf.patch (1.6 -> 1.7) 

---- Diffs:

================================================================
Index: SOURCES/freenx-node-conf.patch
diff -u SOURCES/freenx-node-conf.patch:1.6 SOURCES/freenx-node-conf.patch:1.7
--- SOURCES/freenx-node-conf.patch:1.6	Sun Aug 17 23:55:16 2008
+++ SOURCES/freenx-node-conf.patch	Sat Sep 13 20:45:57 2008
@@ -1,22 +1,20 @@
-diff -Nur freenx-server-0.7.2.orig/node.conf.sample freenx-server-0.7.2.freenx-node-conf/node.conf.sample
---- freenx-server-0.7.2.orig/node.conf.sample	2008-03-14 15:47:47.000000000 -0600
-+++ freenx-server-0.7.2.freenx-node-conf/node.conf.sample	2008-08-17 15:54:20.000000000 -0600
-@@ -460,7 +460,13 @@
- 
- # The key that contains the name of the complete path of command name
+diff -Nur freenx-server-0.7.3.orig/node.conf.sample freenx-server-0.7.3.freenx-node-conf/node.conf.sample
+--- freenx-server-0.7.3.orig/node.conf.sample	2008-08-21 18:44:43.000000000 -0600
++++ freenx-server-0.7.3.freenx-node-conf/node.conf.sample	2008-09-13 12:32:39.000000000 -0600
+@@ -522,6 +522,12 @@
  # 'xauth'.
--#COMMAND_XAUTH=/usr/X11R6/bin/xauth
+ #COMMAND_XAUTH=/usr/bin/xauth
+ 
 +COMMAND_XAUTH=xauth
-+
 +COMMAND_XSET=xset
-+
 +COMMAND_XMODMAP=xmodmap
-+
 +COMMAND_XKBCOMP=xkbcomp
- 
++#
++
  # The key that contains the name of the complete path of command name
  # 'smbmount'.
-@@ -479,7 +485,7 @@
+ #COMMAND_SMBMOUNT=smbmount
+@@ -539,7 +545,7 @@
  #COMMAND_SMBUMOUNT_CIFS=/sbin/umount.cifs
  
  # The key that contains the name of the complete path of the 'netcat' command.
@@ -25,16 +23,16 @@
  
  # The key that contains the name of the complete path of the 'ssh' and
  # 'ssh-keygen' command.
-@@ -545,7 +551,7 @@
- # for examples of useful parameters.
+@@ -606,6 +612,8 @@
  #AGENT_EXTRA_OPTIONS_RFB=""
  #AGENT_EXTRA_OPTIONS_RDP=""
--#AGENT_EXTRA_OPTIONS_X=""
-+AGENT_EXTRA_OPTIONS_X="-fp /usr/share/fonts/misc/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,/usr/share/fonts/Type1/,/usr/share/fonts/TTF/"
+ #AGENT_EXTRA_OPTIONS_X="-nolisten tcp"
++AGENT_EXTRA_OPTIONS_X="-fp /usr/share/fonts/misc/,/usr/share/fonts/100dpi/,/usr
++/share/fonts/75dpi/,/usr/share/fonts/Type1/,/usr/share/fonts/TTF/"
  
  # The number of seconds we wait for the nxagent to start before
  # deciding startup has failed
-@@ -567,6 +573,8 @@
+@@ -627,6 +635,8 @@
  # Extra options to nxproxy. See !M documentation for useful parameters.
  #PROXY_EXTRA_OPTIONS=""
  
@@ -43,10 +41,10 @@
  # In case you want to use an external 'rdesktop' command
  # set this to "1".
  # 
-diff -Nur freenx-server-0.7.2.orig/node.conf.sample.orig freenx-server-0.7.2.freenx-node-conf/node.conf.sample.orig
---- freenx-server-0.7.2.orig/node.conf.sample.orig	1969-12-31 17:00:00.000000000 -0700
-+++ freenx-server-0.7.2.freenx-node-conf/node.conf.sample.orig	2008-08-17 15:54:20.000000000 -0600
-@@ -0,0 +1,585 @@
+diff -Nur freenx-server-0.7.3.orig/node.conf.sample.orig freenx-server-0.7.3.freenx-node-conf/node.conf.sample.orig
+--- freenx-server-0.7.3.orig/node.conf.sample.orig	1969-12-31 17:00:00.000000000 -0700
++++ freenx-server-0.7.3.freenx-node-conf/node.conf.sample.orig	2008-08-21 18:44:43.000000000 -0600
+@@ -0,0 +1,645 @@
 +# node.conf
 +#
 +# This file is provided by FreeNX. It should be placed either into
@@ -112,7 +110,7 @@
 +#ENABLE_USERMODE_AUTHENTICATION="0"
 +
 +# This adds the passdb to the possible authentication methods
-+#ENABLE_PASSDB_AUTHENTICATION="1"
++#ENABLE_PASSDB_AUTHENTICATION="0"
 +
 +# This adds SSH to the possible authentication methods. For it to work sshd
 +# must be set up at localhost accepting password authentication.
@@ -153,7 +151,16 @@
 +# For this to work the binary nxserver-helper has to be installed in 
 +# PATH_BIN.
 +#
-+#ENABLE_SLAVE_MODE="0"
++#ENABLE_SLAVE_MODE="1"
++
++# If ENABLE_LOG_FAILED_LOGINS="1" then failed login attempts are logged to the system
++# auth.log.
++#
++# This is useful in combination with tools like fail2ban.
++#
++# The default is to log failed login attemps via syslog (3).
++#
++#ENABLE_LOG_FAILED_LOGINS="1"
 +
 +#########################################################################
 +# Restriction directives
@@ -198,6 +205,50 @@
 +#ENABLE_DESKTOP_SHARING=1
 +
 +#
++# General shadowing / mirroring notes:
++#
++# By default shadowing is only allowed for the same user.
++#
++# If nxserver finds nxshadowacl binary, it asks it, for which users 
++# the permission is granted.
++# 
++# nxshadowacl <user>
++# 
++# Exit code:
++#
++# 0 -> Save cookie in session file for other users
++# 1 -> Do not save cookie
++#
++# Check if user is allowed to be shadowed by admin user.
++#
++# nxshadowacl <user> <admin>
++# 
++# Exit code:
++#
++# 0 -> Yes, allow shadowing and add to list
++# 1 -> No, don't allow shadowing
++# 
++
++#
++# When using NX 3.0 shadowing, this enables asking the user whether
++# he authorizes another user to shadow his session
++#
++# 0: No authorization request will be presented,
++#    and the session will be shadowed as if the user had approved.
++# 1: (default) Ask for authorization
++#
++#ENABLE_SESSION_SHADOWING_AUTHORIZATION=1
++
++# Allow session shadowing in interactive mode:
++#
++# 1: The shadowing user can interact with the shadowed session.
++#
++# 0: The shadowed session is view-only. No interaction with the
++#    shadowed session is possible.
++#
++#ENABLE_INTERACTIVE_SESSION_SHADOWING=1
++
++#
 +# Enable or disable clipboard:
 +#
 +# client:  The content copied on the client can be pasted inside the
@@ -456,6 +507,13 @@
 +#
 +#ENABLE_SAMBA_PRELOAD="0"
 +
++# FreeNX with ENABLE_SOURCE_BASH_PROFILE="1" will source the users ~/.bash_profile
++# before application startup as we are kind of a login shell.
++#
++# With this key this behaviour can be enabled (default) or disabled.
++# 
++#ENABLE_SOURCE_BASH_PROFILE="1"
++
 +#########################################################################
 +# Path directives
 +#########################################################################
@@ -509,7 +567,7 @@
 +
 +# The key that contains the name of the complete path of command name
 +# 'xauth'.
-+#COMMAND_XAUTH=/usr/X11R6/bin/xauth
++#COMMAND_XAUTH=/usr/bin/xauth
 +
 +# The key that contains the name of the complete path of command name
 +# 'smbmount'.
@@ -594,7 +652,7 @@
 +# for examples of useful parameters.
 +#AGENT_EXTRA_OPTIONS_RFB=""
 +#AGENT_EXTRA_OPTIONS_RDP=""
-+#AGENT_EXTRA_OPTIONS_X=""
++#AGENT_EXTRA_OPTIONS_X="-nolisten tcp"
 +
 +# The number of seconds we wait for the nxagent to start before
 +# deciding startup has failed
@@ -632,9 +690,645 @@
 +# 
 +# If nxviewer cannot be found this is set automatically to "1".
 +#ENABLE_EXTERNAL_NXVIEWER="0"
-diff -Nur freenx-server-0.7.2.orig/nxloadconfig freenx-server-0.7.2.freenx-node-conf/nxloadconfig
---- freenx-server-0.7.2.orig/nxloadconfig	2008-03-14 15:47:47.000000000 -0600
-+++ freenx-server-0.7.2.freenx-node-conf/nxloadconfig	2008-08-17 15:54:32.000000000 -0600
+diff -Nur freenx-server-0.7.3.orig/node.conf.sample.orig.rej freenx-server-0.7.3.freenx-node-conf/node.conf.sample.orig.rej
+--- freenx-server-0.7.3.orig/node.conf.sample.orig.rej	1969-12-31 17:00:00.000000000 -0700
++++ freenx-server-0.7.3.freenx-node-conf/node.conf.sample.orig.rej	2008-09-13 12:30:13.000000000 -0600
+@@ -0,0 +1,588 @@
++***************
++*** 0 ****
++--- 1,585 ----
+++ # node.conf
+++ #
+++ # This file is provided by FreeNX. It should be placed either into
+++ # /etc/nxserver/node.conf (FreeNX style) or /usr/NX/etc/node.conf
+++ # (NoMachine NX style).
+++ #
+++ # It is mostly compatible with NoMachine node.conf. The most important 
+++ # difference is that no spaces are allowed when assigning values (eg 
+++ # "A=value" is allowed, "A = value" is NOT).
+++ #
+++ # This file is sourced by bash, so you can do some fancy stuff here if you
+++ # want to, but be aware that it is sourced 3 times per connection. If you 
+++ # want autostart stuff, set NODE_AUTOSTART instead!
+++ # 
+++ #
+++ # You surely are aware that FreeNX is based on the fantastic results that
+++ # the hard work by NoMachine.com has achieved. NoMachine.com released the
+++ # core NX libraries under the GPL. The installation of these libs are the
+++ # precondition for all FreeNX scripts to work. If you are installing this
+++ # software with the help of one of the package management tools of your
+++ # Linux distribution, you can assume that this dependency is taken care of
+++ # by the tool.
+++ #
+++ # You have questions about the inner workings of the NX technology?
+++ #
+++ # Then you are recommended to first check out the rich and very detailed
+++ # NoMachine documentation and their online Knowledge Base at 
+++ #
+++ #           http://www.nomachine.com/kb/
+++ #
+++ # Other sources of information are the NoMachine mailing lists 
+++ # (nxusers at nomachine.com and nxdevelopers at nomachine.com):
+++ #
+++ #           http://www.nomachine.com/mailinglists.php
+++ #
+++ # The FreeNX (freenx-knx at kde.org) list is here:
+++ #
+++ #           https://mail.kde.org/mailman/listinfo/freenx-knx
+++ #
+++ # SVN: $Id$
+++ 
+++ #########################################################################
+++ # General FreeNX directives
+++ #########################################################################
+++ 
+++ # The host name which is used by NX server. It's should be used if it's
+++ # different than the default hostname (as returned by `hostname`)
+++ #SERVER_NAME="$(hostname)"
+++ 
+++ # The port number where local 'sshd' is listening.
+++ #SSHD_PORT=22
+++ 
+++ 
+++ #########################################################################
+++ # Authentication / Security directives
+++ #########################################################################
+++ 
+++ # Authentication directives
+++ 
+++ # This adds the usermode to the possible authentication methods
+++ # Usermode means that a user can start the nxserver as his shell
+++ # and connect directly to the right server via a custom client.
+++ #ENABLE_USERMODE_AUTHENTICATION="0"
+++ 
+++ # This adds the passdb to the possible authentication methods
+++ #ENABLE_PASSDB_AUTHENTICATION="1"
+++ 
+++ # This adds SSH to the possible authentication methods. For it to work sshd
+++ # must be set up at localhost accepting password authentication.
+++ #ENABLE_SSH_AUTHENTICATION="1"
+++ 
+++ # This adds SU to the possible authentication methods. For it to work the 
+++ # "nx" user must be in the wheel (RedHat, Fedora) or the users group (SUSE)
+++ # and the user logging in must have a valid shell that accepts the -c
+++ # parameter.
+++ #ENABLE_SU_AUTHENTICATION="0"
+++ 
+++ # Require all users to be in the passdb, regardless of authentication method
+++ #ENABLE_USER_DB="0"
+++ 
+++ 
+++ # If enabled forces the user to use encryption. This will bail out
+++ # if the user does not have encryption enabled.
+++ #ENABLE_FORCE_ENCRYPTION="0"
+++ 
+++ # Refuse the NX client connection if SSHD does not export the
+++ # SSH_CONNECTION and SSH_CLIENT variables in the environment
+++ # passed to the NX server.
+++ # 1: Will check the remote IP and will not accept the
+++ #    connection if it can't be determined.
+++ # 0: Will accept the connection even if the remote IP
+++ #    is not provided.
+++ #SSHD_CHECK_IP="0"
+++ 
+++ # If ENABLE_SLAVE_MODE="1" the user will be just logged in _once_ and the 
+++ # communication is done via nxnode slave mode.
+++ #
+++ # This is useful for one time passwords or to have less traffic in utmp 
+++ # and wtmp.
+++ #
+++ # Also session startup times are much faster in slave mode. This is true especially 
+++ # if many printers or shares have to be added.
+++ #
+++ # For this to work the binary nxserver-helper has to be installed in 
+++ # PATH_BIN.
+++ #
+++ #ENABLE_SLAVE_MODE="0"
+++ 
+++ #########################################################################
+++ # Restriction directives
+++ #########################################################################
+++ 
+++ # The base display number from which sessions are started.
+++ #DISPLAY_BASE=1000
+++ 
+++ # The maximum number of contemporary sessions that can be run on FreeNX
+++ #SESSION_LIMIT=200
+++ 
+++ # The maximum number of contemporary sessions that a single user can run
+++ # on FreeNX. Defaults to the value of SESSION_LIMIT.
+++ #SESSION_USER_LIMIT=200
+++ 
+++ # The number of displays reserved for sessions, it has to be greater or equal
+++ # to the maximum number of contemporary sessions that a server can run.
+++ #DISPLAY_LIMIT=200
+++ 
+++ 
+++ # User for which sessions should be persistent. Either the keyword "all" or a
+++ # comma-separated list of usernames or groups in the @groupname syntax.
+++ #ENABLE_PERSISTENT_SESSION="all"
+++ 
+++ # Users and groups for whom persistent sessions should be disabled.
+++ # Especially useful if ENABLE_PERSISTENT_SESSION="all"
+++ #DISABLE_PERSISTENT_SESSION=""
+++ 
+++ # This enables the mirroring of running sessions via VNC feature.
+++ # 
+++ # Session is marked as resumable and type is vnc-mirrored.
+++ # 
+++ #ENABLE_MIRROR_VIA_VNC=1
+++ 
+++ # This enables the sharing of :0 via VNC feature.
+++ # 
+++ # Session is marked as resumable and type is vnc-local.
+++ # 
+++ # Note: You need to have the rights to access the display
+++ #       else it does not work.
+++ #
+++ #ENABLE_DESKTOP_SHARING=1
+++ 
+++ #
+++ # Enable or disable clipboard:
+++ #
+++ # client:  The content copied on the client can be pasted inside the
+++ #            NX session.
+++ #
+++ # server: The content copied inside the NX session can be pasted
+++ #             on the client.
+++ #
+++ # both:    The copy&paste operations are allowed both between the
+++ #             client and the NX session and vice-versa.
+++ #
+++ # none:   The copy&paste operations between the client and the NX
+++ #            session are never allowed.
+++ #
+++ #ENABLE_CLIPBOARD="both"
+++ 
+++ 
+++ #
+++ # Enable or disable the pulldown dialog, which provides a graphical
+++ # way to suspend or terminate the rootless session:
+++ #
+++ # 1: Enabled. The pulldown menu is shown when the mouse pointer
+++ #     moves near the middle of the top boundary of a window and
+++ #     allows the user to suspend or terminate the session by means
+++ #     of an icon-click.
+++ #
+++ # 0: Disabled. The ctrl+alt+T key combination has to be issued
+++ #     to get the dialog for suspending or terminating the session.
+++ #
+++ #ENABLE_PULLDOWN_MENU="1"
+++ 
+++ 
+++ # The option USE_PROCESSOR_TASKSET is for setting the CPU affinity of all
+++ # nx related processes.
+++ #
+++ # Note: To have for example startkde run on even another core, just specify:
+++ #
+++ # COMMAND_STARTKDE="taskset -c 2 -- startkde"
+++ #
+++ # FreeNX runs this option like: $COMMAND_TASKSET -cp "$USE_PROCESSOR_TASKSET" $$
+++ # 
+++ # So with $USE_PROCESSOR_TASKSET set to 3,4 it would balance the tasks to cores
+++ # 3 and 4.
+++ #
+++ # If this option is empty, no balance to cores is done.
+++ #
+++ #USE_PROCESSOR_TASKSET=""
+++ 
+++ # If you set ENABLE_ADVANCED_SESSION_CONTROL="1" you can start a new application in an already
+++ # running rootless session by using "add <rest of name>" as session name.
+++ #
+++ # Note: The client will return a message on that.
+++ #
+++ #ENABLE_ADVANCED_SESSION_CONTROL="0"
+++ 
+++ # If you set ENABLE_SHOW_RUNNING_SESSIONS="0" then nxserver will only show
+++ # suspended sessions and you will not be able to resume or terminate a running 
+++ # session.
+++ #
+++ #ENABLE_SHOW_RUNNING_SESSIONS="1"
+++ 
+++ #########################################################################
+++ # Logging directives
+++ #########################################################################
+++ 
+++ # This directives controls the verbosity of the server-wide log.
+++ # 0: No Logging
+++ # 1: Errors
+++ # 2: Warnings
+++ # 3: Important information
+++ # 4: Server - Client communication
+++ # 5: Information
+++ # 6: Debugging information
+++ # 7: stderror of some applications
+++ #NX_LOG_LEVEL=0
+++ 
+++ # By setting this to 0 the nxserver might be a bit faster, but passwords can be found in the log files.
+++ #NX_LOG_SECURE=1
+++ 
+++ # Before turning logging on, please make sure that NX_LOGFILE is
+++ # writeable for the "nx" user
+++ #NX_LOGFILE=/var/log/nxserver.log
+++ 
+++ # This directive controls if the temporary session directory
+++ # ($HOME/.nx/C-<hostname>-<display>-<session_id>) should be kept after a
+++ # session has ended. A successfully terminated session will be saved as
+++ # T-C-<hostname>-<display>-<session_id> while a failed session will be saved
+++ # as F-C-<hostname>-<display>-<session_id>.
+++ # The default is to cleanup the directories.
+++ #SESSION_LOG_CLEAN=1
+++ 
+++ # Amount of seconds nxserver is to keep session history. The default of 2592000
+++ # is equivalent to 30 days. If this is 0 no session history will be kept
+++ # and a negative value denotes infinity.
+++ #SESSION_HISTORY=2592000
+++ 
+++ 
+++ #########################################################################
+++ # Forwarding directives
+++ #########################################################################
+++ 
+++ # FreeNX with ENABLE_SERVER_FORWARD="1" will automatically forward all
+++ # connections to the host specified in SERVER_FORWARD_HOST with the
+++ # secret key SERVER_FORWARD_KEY.
+++ #
+++ # This allows to have a "chain" of NX Servers. Note that you will need to
+++ # use "SSL encryption" for all connections.
+++ 
+++ #ENABLE_SERVER_FORWARD="0"
+++ #SERVER_FORWARD_HOST=""
+++ #SERVER_FORWARD_PORT=22
+++ #SERVER_FORWARD_KEY="/usr/NX/share/client.id_dsa.key"
+++ 
+++ 
+++ # FreeNX with ENABLE_NOMACHINE_FORWARD_PORT="1" will automatically forward all
+++ # connections to the commercial NoMachine nxserver installed on the same
+++ # machine, which go in by port NOMACHINE_FORWARD_PORT. This feature is introduced
+++ # to enable the usage of FreeNX and NoMachine NX side by side on the same machine
+++ # without conflicts.
+++ #
+++ # Note: You need to let SSHD listen to several ports to make use of this
+++ #       directive.
+++ 
+++ #ENABLE_NOMACHINE_FORWARD_PORT="0"
+++ #NOMACHINE_FORWARD_PORT="22"
+++ 
+++ #NOMACHINE_SERVER="/usr/NX/bin/nxserver"
+++ #NOMACHINE_NX_HOME_DIR="/usr/NX/home/nx"
+++ 
+++ 
+++ # LOAD BALANCING
+++ # ==============
+++ #
+++ # To do load balancing setup some hosts in LOAD_BALANCE_SERVERS and
+++ # make:
+++ #
+++ #   - either sure that all incoming connections are sent to the master
+++ #     server by using forwarding directives on the "slave" servers.
+++ #
+++ #   - or share the session database space via NFS between the servers.
+++ #     (not recommended at the moment as race conditions for DISPLAYs can 
+++ #      occur)
+++ #
+++ 
+++ #LOAD_BALANCE_SERVERS=""
+++ 
+++ # The following load_balance_algorithms are available at the moment:
+++ #
+++ # "load", "round-robin", "random"
+++ #
+++ # For "load" you need a script called nxcheckload in PATH_BIN.
+++ # 
+++ # A sample script, which you can change to your needs it shipped with
+++ # FreeNX under the name nxcheckload.sample.
+++ 
+++ #LOAD_BALANCE_ALGORITHM="random"
+++ 
+++ # By setting ENABLE_LOADBALANCE="1" you can let users choose their
+++ # preferred host, while being forwarded to another server. Of course
+++ # this is just a preference. The loadbalancing algorithm can completely
+++ # choose to ignore the users choice.
+++ 
+++ #ENABLE_LOAD_BALANCE_PREFERENCE="0"
+++ 
+++ #########################################################################
+++ # Services directives
+++ #########################################################################
+++ 
+++ # FreeNX with ENABLE_ESD_PRELOAD="1" will automatically try to setup
+++ # the sound with the help of the esd media helper.
+++ #
+++ # Currently ESD will be used just by the Windows NX Client.
+++ #
+++ # Be sure that $ESD_BIN_PRELOAD is in your path, does exist and work
+++ # before enabling this directive.
+++ 
+++ #ENABLE_ESD_PRELOAD="0"
+++ #ESD_BIN_PRELOAD="esddsp"
+++ 
+++ # FreeNX with ENABLE_ARTSD_PRELOAD="1" will automatically try to setup
+++ # the sound with the help of the artsd media helper.
+++ #
+++ # Currently ARTSD will be used just by the Linux NX Client.
+++ #
+++ # Be sure that $ARTSD_BIN_PRELOAD is in your path, does exist and work
+++ # before enabling this directive.
+++ 
+++ #ENABLE_ARTSD_PRELOAD="0"
+++ #ARTSD_BIN_PRELOAD="artsdsp"
+++ 
+++ # FreeNX with ENABLE_KDE_CUPS="1" will automatically write 
+++ # $KDE_PRINTRC and put the current used socket into it.
+++ #
+++ # If you additionally enable ENABLE_KDE_CUPS_DYNAMIC it will set the 
+++ # Host entry to the script nxcups-gethost, which dynamically tries all 
+++ # possible entries to find the current printing host.
+++ #
+++ # The order is: CUPS_SERVER (env var), ~/.cups/client.conf, $KDE_PRINTRC,
+++ #               $CUPS_DEFAULT_SOCK, localhost
+++ #
+++ # So this option is most useful with ENABLE_CUPS_SERVER_EXPORT="1".
+++ # 
+++ # $KDE_PRINTRC is automatically calculated if its not set.
+++ 
+++ #ENABLE_KDE_CUPS="0"
+++ #ENABLE_KDE_CUPS_DYNAMIC="0"
+++ #KDE_PRINTRC="$KDEHOME/share/config/kdeprintrc"
+++ 
+++ # FreeNX with ENABLE_CUPS_SERVER_EXPORT="1" will automatically
+++ # export the environment variable CUPS_SERVER.
+++ 
+++ #ENABLE_CUPS_SERVER_EXPORT="1"
+++ 
+++ # FreeNX with ENABLE_CUPS_SEAMLESS will automatically try to download the 
+++ # necessary ppds from the client.
+++ # 
+++ # As the forwarding is just active as soon as nxagent is started,
+++ # we need a small delay of $CUPS_SEAMLESS_DELAY.
+++ #
+++ # Note: You need to use a patched cupsd on client side.
+++ 
+++ #ENABLE_CUPS_SEAMLESS="0"
+++ #CUPS_SEAMLESS_DELAY="10"
+++ 
+++ # FreeNX with ENABLE_FOOMATIC will integrate the foomatic db to the list
+++ # of available ppd drivers via the $COMMAND_FOOMATIC command.
+++ 
+++ #ENABLE_FOOMATIC="1"
+++ #COMMAND_FOOMATIC="/usr/lib/cups/driver/foomatic-ppdfile"
+++ 
+++ # CUPS_BACKEND and CUPS_ETC are the corresponding paths of your CUPS 
+++ # installation.
+++ 
+++ #CUPS_BACKEND="/usr/lib/cups/backend"
+++ #CUPS_IPP_BACKEND="$CUPS_BACKEND/nxipp"
+++ #CUPS_DEFAULT_SOCK="/var/run/cups/cups.sock"
+++ #CUPS_ETC="/etc/cups"
+++ 
+++ # SAMBA_MOUNT_SHARE_PROTOCOL is a key to configure the supported 
+++ # protocols for mounting shares.
+++ #
+++ # This key can be set to the following values:
+++ #
+++ # both, either SMB and CIFS protocol are supported, this is the default value.
+++ # smbfs, only SMB protocol is supported.
+++ # cifs, only CIFS protocol is supported.
+++ # none, no network file-sharing protocol is supported.
<<Diff was trimmed, longer than 597 lines>>

---- CVS-web:
    http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/SOURCES/freenx-node-conf.patch?r1=1.6&r2=1.7&f=u