SOURCES (LINUX_2_6): kernel-ia64.config - sorted, no other change
sparky
sparky at pld-linux.org
Sat Sep 27 20:35:55 CEST 2008
Author: sparky Date: Sat Sep 27 18:35:55 2008 GMT
Module: SOURCES Tag: LINUX_2_6
---- Log message:
- sorted, no other change
---- Files affected:
SOURCES:
kernel-ia64.config (1.1.2.61 -> 1.1.2.62)
---- Diffs:
================================================================
Index: SOURCES/kernel-ia64.config
diff -u SOURCES/kernel-ia64.config:1.1.2.61 SOURCES/kernel-ia64.config:1.1.2.62
--- SOURCES/kernel-ia64.config:1.1.2.61 Tue May 20 22:20:52 2008
+++ SOURCES/kernel-ia64.config Sat Sep 27 20:35:49 2008
@@ -1,20 +1,8 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21.1
-# Tue May 8 13:18:38 2007
-#
-
-#
-# General setup
-#
-
-#
-# IO Schedulers
-#
-
-#
-# Processor type and features
-#
+
+#-
+#- *** FILE: arch/ia64/Kconfig ***
+#-
+#- file init/Kconfig goes here
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
@@ -42,35 +30,19 @@
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-CONFIG_HZ_300=y
-# CONFIG_HZ_1000 is not set
+#- file kernel/Kconfig.hz goes here
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_NR_CPUS=64
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+#- file kernel/Kconfig.preempt goes here
+#- file mm/Kconfig goes here
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -92,32 +64,64 @@
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=m
+#- file drivers/sn/Kconfig goes here
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+#- file drivers/firmware/Kconfig goes here
+#- file fs/Kconfig.binfmt goes here
+#- file kernel/power/Kconfig goes here
+#- file drivers/acpi/Kconfig goes here
+#- file arch/ia64/kernel/cpufreq/Kconfig goes here
+CONFIG_PCI_DOMAINS=y
+#- file drivers/pci/pcie/Kconfig goes here
+#- file drivers/pci/Kconfig goes here
+#- file drivers/pci/hotplug/Kconfig goes here
+#- file drivers/pcmcia/Kconfig goes here
+#- file net/Kconfig goes here
+#- file drivers/Kconfig goes here
+CONFIG_MSPEC=m
+#- file fs/Kconfig goes here
+#- file arch/ia64/kvm/Kconfig goes here
+#- file lib/Kconfig goes here
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+#- file arch/ia64/hp/sim/Kconfig goes here
+#- file arch/ia64/Kconfig.debug goes here
+#- file kernel/vserver/Kconfig goes here
+#- file security/Kconfig goes here
+#- file crypto/Kconfig goes here
+
+#-
+#- *** FILE: arch/ia64/Kconfig.debug ***
+#-
+#- file lib/Kconfig.debug goes here
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+CONFIG_IA64_PRINT_HAZARDS=y
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=m
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
+#-
+#- *** FILE: arch/ia64/hp/sim/Kconfig ***
+#-
+CONFIG_HP_SIMETH=y
+CONFIG_HP_SIMSERIAL=y
+CONFIG_HP_SIMSERIAL_CONSOLE=y
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
+#-
+#- *** FILE: arch/ia64/kernel/cpufreq/Kconfig ***
+#-
+#- file drivers/cpufreq/Kconfig goes here
+#- CPUFreq processor drivers
+CONFIG_IA64_ACPI_CPUFREQ=m
+
+#-
+#- *** FILE: drivers/acpi/Kconfig ***
+#-
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
@@ -139,185 +143,53 @@
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPUFreq processor drivers
-#
-CONFIG_IA64_ACPI_CPUFREQ=m
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=m
-CONFIG_PCIEAER=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=m
-CONFIG_HOTPLUG_PCI_FAKE=m
-CONFIG_HOTPLUG_PCI_ACPI=m
-CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_HOTPLUG_PCI_SGI=m
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PD6729=m
-CONFIG_I82092=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Packet Radio protocols
-#
-
-#
-# AX.25 network device drivers
-#
-
-#
-# IrDA protocols
-#
-
-#
-# IrDA options
-#
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_MCS_FIR=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-
-#
-# Wireless
-#
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# User Modules And Translation Layers
-#
-
-#
-# RAM/ROM/Flash chip drivers
-#
-
-#
-# Mapping drivers for chip access
-#
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551_BUGFIX=y
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
+#-
+#- *** FILE: drivers/ata/Kconfig ***
+#-
+CONFIG_ATA_NONSTANDARD=y
+CONFIG_PATA_PCMCIA=m
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_CAFE=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+#-
+#- *** FILE: drivers/atm/Kconfig ***
+#-
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
+CONFIG_ATM_HE_USE_SUNI=y
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+#-
+#- *** FILE: drivers/auxdisplay/Kconfig ***
+#-
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
+#-
+#- *** FILE: drivers/block/Kconfig ***
+#-
CONFIG_PARIDE=m
+#- file drivers/block/paride/Kconfig goes here
+CONFIG_BLK_CPQ_DA=m
+#- file drivers/s390/block/Kconfig goes here
-#
-# Parallel IDE high-level drivers
-#
+#-
+#- *** FILE: drivers/block/paride/Kconfig ***
+#-
+#- Parallel IDE high-level drivers
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
+#- Parallel IDE protocol modules
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
@@ -333,18 +205,159 @@
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_MISC_DEVICES=y
-CONFIG_PHANTOM=m
-CONFIG_EEPROM_93CX6=m
-CONFIG_SGI_IOC4=m
+
+#-
+#- *** FILE: drivers/bluetooth/Kconfig ***
+#-
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+
+#-
+#- *** FILE: drivers/char/Kconfig ***
+#-
+CONFIG_SPECIALIX_RTSCTS=y
+CONFIG_RIO_OLDPCI=y
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+#- file drivers/serial/Kconfig goes here
+#- file drivers/char/ipmi/Kconfig goes here
+#- file drivers/char/hw_random/Kconfig goes here
+CONFIG_EFI_RTC=y
+CONFIG_DTLK=m
+#- file drivers/char/pcmcia/Kconfig goes here
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_MMTIMER=m
+#- file drivers/char/tpm/Kconfig goes here
+#- file drivers/s390/char/Kconfig goes here
+
+#-
+#- *** FILE: drivers/char/agp/Kconfig ***
+#-
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+
+#-
+#- *** FILE: drivers/char/drm/Kconfig ***
+#-
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+
+#-
+#- *** FILE: drivers/char/hw_random/Kconfig ***
+#-
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_INTEL=m
+
+#-
+#- *** FILE: drivers/char/pcmcia/Kconfig ***
+#-
+CONFIG_SYNCLINK_CS=m
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+
+#-
+#- *** FILE: drivers/char/tpm/Kconfig ***
+#-
+CONFIG_TCG_TIS=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_INFINEON=m
+
+#-
+#- *** FILE: drivers/cpufreq/Kconfig ***
+#-
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#-
+#- *** FILE: drivers/firewire/Kconfig ***
+#-
+#- A new alternative FireWire stack is available with EXPERIMENTAL=y
+#- Enable only one of the two stacks, unless you know what you are doing
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+
+#-
+#- *** FILE: drivers/firmware/Kconfig ***
+#-
+CONFIG_EFI_VARS=m
+CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
+
+#-
+#- *** FILE: drivers/hid/usbhid/Kconfig ***
+#-
+#- USB Input Devices
+CONFIG_USB_HID=m
+#- Input core support is needed for USB HID input layer or HIDBP support
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#-
+#- *** FILE: drivers/hwmon/Kconfig ***
+#-
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#-
+#- *** FILE: drivers/i2c/Kconfig ***
+#-
+CONFIG_I2C=m
+#- file drivers/i2c/algos/Kconfig goes here
+#- file drivers/i2c/busses/Kconfig goes here
+#- file drivers/i2c/chips/Kconfig goes here
+
+#-
+#- *** FILE: drivers/i2c/busses/Kconfig ***
+#-
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_TINY_USB=m
+CONFIG_I2C_PCA_ISA=m
+
+#-
+#- *** FILE: drivers/ide/Kconfig ***
+#-
CONFIG_IDE=m
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
+#- Please see Documentation/ide/ide.txt for help/info on IDE drives
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
@@ -357,12 +370,10 @@
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
+#- IDE chipset support/bugfixes
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_IDEPNP=m
+#- PCI IDE chipsets support
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
@@ -370,7 +381,6 @@
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
-# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
@@ -396,221 +406,90 @@
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_IDE_ARM is not set
+#- Other IDE chipsets support
+#- Note: most of these also require special kernel boot parameters
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD is not set
-#
-# SCSI device support
-#
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-
-#
-# SCSI Transports
-#
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
<<Diff was trimmed, longer than 597 lines>>
---- CVS-web:
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/SOURCES/kernel-ia64.config?r1=1.1.2.61&r2=1.1.2.62&f=u
More information about the pld-cvs-commit
mailing list