packages: Coin/Coin.spec (NEW) - Toolkit needed by FreeCAD. Does not build ...

[matkor]

Author: matkor                       Date: Fri Jun  4 18:07:58 2010 GMT
Module: packages                      Tag: HEAD
---- Log message:
- Toolkit needed by FreeCAD. Does not build for me.

---- Files affected:
packages/Coin:
   Coin.spec (NONE -> 1.1)  (NEW)

---- Diffs:

================================================================
Index: packages/Coin/Coin.spec
diff -u /dev/null packages/Coin/Coin.spec:1.1
--- /dev/null	Fri Jun  4 20:07:58 2010
+++ packages/Coin/Coin.spec	Fri Jun  4 20:07:52 2010
@@ -0,0 +1,216 @@
+# $Revision$, $Date$
+# TODO: 
+# 	Make it build :( 
+
+# Conditional build:
+%bcond_with	tests		# build with tests
+%bcond_without	tests		# build without tests
+#
+######		Unknown group!
+Summary:	High-level, retained-mode toolkit for effective 3D graphics development
+Summary(pl.UTF-8):	Zbiór narzędzi wysokiego poziomu do efektywnego rozwijania grafiki 3D.
+Name:		Coin
+Version:	3.1.3
+Release:	0.1
+License:	GPL
+Group:		Productivity/Other
+# http://ftp.coin3d.org/coin/src/all/Coin-3.1.3.tar.gz
+Source0:	http://ftp.coin3d.org/coin/src/all/%{name}-%{version}.tar.gz
+# Source0-md5:	1538682f8d92cdf03e845c786879fbea
+#Source1:	-
+# Source1-md5:	-
+URL:		http://www.coin3d.org/
+#Patch0: %{name}-DESTDIR.patch
+%if %{with initscript}
+BuildRequires:	rpmbuild(macros) >= 1.228
+Requires(post,preun):	/sbin/chkconfig
+Requires:	rc-scripts
+%endif
+#BuildRequires:	-
+#BuildRequires:	autoconf
+#BuildRequires:	automake
+#BuildRequires:	intltool
+#BuildRequires:	libtool
+#Requires(postun):	-
+#Requires(pre,post):	-
+#Requires(preun):	-
+#Requires:	-
+#Provides:	-
+#Provides:	group(foo)
+#Provides:	user(foo)
+#Obsoletes:	-
+#Conflicts:	-
+#BuildArch:	noarch
+#ExclusiveArch:	%{ix86}
+BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+
+%description
+
+%description -l pl.UTF-8
+
+%package subpackage
+######		Unknown group!
+Summary:	-
+Summary(pl.UTF-8):	-
+Group:		-
+
+%description subpackage
+
+%description subpackage -l pl.UTF-8
+
+%package libs
+Summary:	-
+Summary(pl.UTF-8):	-
+Group:		Libraries
+
+%description libs
+
+%description libs -l pl.UTF-8
+
+%package devel
+Summary:	Header files for ... library
+Summary(pl.UTF-8):	Pliki nagłówkowe biblioteki ...
+Group:		Development/Libraries
+# if base package contains shared library for which these headers are
+#Requires:	%{name} = %{version}-%{release}
+# if -libs package contains shared library for which these headers are
+#Requires:	%{name}-libs = %{version}-%{release}
+
+%description devel
+Header files for ... library.
+
+%description devel -l pl.UTF-8
+Pliki nagłówkowe biblioteki ....
+
+%package static
+Summary:	Static ... library
+Summary(pl.UTF-8):	Statyczna biblioteka ...
+Group:		Development/Libraries
+Requires:	%{name}-devel = %{version}-%{release}
+
+%description static
+Static ... library.
+
+%description static -l pl.UTF-8
+Statyczna biblioteka ....
+
+%prep
+%setup -q
+#%setup -q -c -T
+#%setup -q -n %{name}
+#%setup -q -n %{name}-%{version}.orig -a 1
+#%patch0 -p1
+
+# undos the source
+#find '(' -name '*.php' -o -name '*.inc' ')' -print0 | xargs -0 %{__sed} -i -e 's,\r$,,'
+
+# remove CVS control files
+#find -name CVS -print0 | xargs -0 rm -rf
+
+# you'll need this if you cp -a complete dir in source
+# cleanup backups after patching
+find '(' -name '*~' -o -name '*.orig' ')' -print0 | xargs -0 -r -l512 rm -f
+
+%build
+# if ac/am/* rebuilding is necessary, do it in this order and add
+# appropriate BuildRequires
+#%%{__intltoolize}
+#%%{__gettextize}
+#%%{__libtoolize}
+#%%{__aclocal}
+#%%{__autoconf}
+#%%{__autoheader}
+#%%{__automake}
+# if not running libtool or automake, but config.sub is too old:
+# cp -f /usr/share/automake/config.sub .
+%configure \
+	  --enable-system-expat
+
+%{__make}
+
+#%{__make} \
+#	CFLAGS="%{rpmcflags}" \
+#	LDFLAGS="%{rpmldflags}"
+
+%install
+rm -rf $RPM_BUILD_ROOT
+# create directories if necessary
+#install -d $RPM_BUILD_ROOT
+%if %{with initscript}
+install -d $RPM_BUILD_ROOT/etc/{sysconfig,rc.d/init.d}
+%endif
+#install -d $RPM_BUILD_ROOT%{_examplesdir}/%{name}-%{version}
+
+%{__make} install \
+	DESTDIR=$RPM_BUILD_ROOT
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%pre
+%groupadd -g xxx %{name}
+%useradd -u xxx -d /var/lib/%{name} -g %{name} -c "XXX User" %{name}
+
+%post
+
+%preun
+
+%postun
+if [ "$1" = "0" ]; then
+	%userremove %{name}
+	%groupremove %{name}
+fi
+
+%if %{with ldconfig}
+%post	-p /sbin/ldconfig
+%postun	-p /sbin/ldconfig
+%endif
+
+%if %{with initscript}
+%post init
+/sbin/chkconfig --add %{name}
+%service %{name} restart
+
+%preun init
+if [ "$1" = "0" ]; then
+	%service -q %{name} stop
+	/sbin/chkconfig --del %{name}
+fi
+%endif
+
+%files
+%defattr(644,root,root,755)
+%doc AUTHORS CREDITS ChangeLog NEWS README THANKS TODO
+
+%if 0
+# if _sysconfdir != %{_sysconfdir}:
+#%%dir %{_sysconfdir}
+%config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/*
+%attr(755,root,root) %{_bindir}/*
+%{_datadir}/%{name}
+%endif
+
+# initscript and its config
+%if %{with initscript}
+%attr(754,root,root) /etc/rc.d/init.d/%{name}
+%config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/%{name}
+%endif
+
+#%{_examplesdir}/%{name}-%{version}
+
+%if %{with subpackage}
+%files subpackage
+%defattr(644,root,root,755)
+#%doc extras/*.gz
+#%{_datadir}/%{name}-ext
+%endif
+
+%define date	%(echo `LC_ALL="C" date +"%a %b %d %Y"`)
+%changelog
+* %{date} PLD Team <feedback at pld-linux.org>
+All persons listed below can be reached at <cvs_login>@pld-linux.org
+
+$Log$
+Revision 1.1  2010/06/04 18:07:52  matkor
+- Toolkit needed by FreeCAD. Does not build for me.
+
================================================================