[packages/nagios-nrpe] up to 3.2.0 (2017-06-27)

glen glen at pld-linux.org
Tue Jul 11 11:23:40 CEST 2017


commit 16af75f012528c3d1105ca0511482495b42da727
Author: Elan Ruusamäe <glen at pld-linux.org>
Date:   Tue Jul 11 12:22:57 2017 +0300

    up to 3.2.0 (2017-06-27)

 commands.cfg             | 43 ++++++++++++++++++++++++++++++-----
 nagios-nrpe-config.patch | 59 ++++++++++++++++++++++++++++++++++++------------
 nagios-nrpe.spec         |  6 ++---
 3 files changed, 85 insertions(+), 23 deletions(-)
---
diff --git a/nagios-nrpe.spec b/nagios-nrpe.spec
index 1cd6744..0b34add 100644
--- a/nagios-nrpe.spec
+++ b/nagios-nrpe.spec
@@ -1,12 +1,12 @@
 Summary:	Nagios remote plugin execution service/plugin
 Summary(pl.UTF-8):	Demon i wtyczka zdalnego wywoływania wtyczek Nagios
 Name:		nagios-nrpe
-Version:	3.0.1
+Version:	3.2.0
 Release:	1
 License:	GPL v2
 Group:		Networking
 Source0:	http://downloads.sourceforge.net/nagios/nrpe-%{version}.tar.gz
-# Source0-md5:	8c81f251d9ee0903e5ff0191e99f7981
+# Source0-md5:	5c81355bcd8b9929ca904879075e1ff5
 Source1:	nrpe.init
 Source2:	nrpe-command.cfg
 Source3:	%{name}.tmpfiles
@@ -141,7 +141,7 @@ fi
 
 %files
 %defattr(644,root,root,755)
-%doc Changelog LEGAL README* SECURITY.md update-cfg.pl
+%doc CHANGELOG.md LEGAL README* SECURITY.md update-cfg.pl
 %attr(640,root,nagios) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/nrpe.cfg
 %attr(750,root,nagios) %dir %{_sysconfdir}/nrpe.d
 %attr(640,root,nagios) %config(noreplace) %verify(not md5 mtime size) %{_sysconfdir}/nrpe.d/commands.cfg
diff --git a/commands.cfg b/commands.cfg
index 4ff6c62..3aa8fb1 100644
--- a/commands.cfg
+++ b/commands.cfg
@@ -19,21 +19,52 @@
 
 
 # The following examples use hardcoded command arguments...
+# This is by far the most secure method of using NRPE
 
 #command[check_users]=/usr/lib/nagios/check_users -w 5 -c 10
-#command[check_load]=/usr/lib/nagios/check_load -w 15,10,5 -c 30,25,20
+#command[check_load]=/usr/lib/nagios/check_load -r -w .15,.10,.05 -c .30,.25,.20
 #command[check_hda1]=/usr/lib/nagios/check_disk -w 20% -c 10% -p /dev/hda1
 #command[check_zombie_procs]=/usr/lib/nagios/check_procs -w 5 -c 10 -s Z
 #command[check_total_procs]=/usr/lib/nagios/check_procs -w 150 -c 200
 
-
 # The following examples allow user-supplied arguments and can
 # only be used if the NRPE daemon was compiled with support for
 # command arguments *AND* the dont_blame_nrpe directive in this
 # config file is set to '1'.  This poses a potential security risk, so
 # make sure you read the SECURITY file before doing this.
 
-#command[check_users]=/usr/lib/nagios/check_users -w $ARG1$ -c $ARG2$
-#command[check_load]=/usr/lib/nagios/check_load -w $ARG1$ -c $ARG2$
-#command[check_disk]=/usr/lib/nagios/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
-#command[check_procs]=/usr/lib/nagios/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+### MISC SYSTEM METRICS ###
+#command[check_users]=/usr/lib/nagios/check_users $ARG1$
+#command[check_load]=/usr/lib/nagios/check_load $ARG1$
+#command[check_disk]=/usr/lib/nagios/check_disk $ARG1$
+#command[check_swap]=/usr/lib/nagios/check_swap $ARG1$
+#command[check_cpu_stats]=/usr/lib/nagios/check_cpu_stats.sh $ARG1$
+#command[check_mem]=/usr/lib/nagios/custom_check_mem -n $ARG1$
+
+### GENERIC SERVICES ###
+#command[check_init_service]=sudo /usr/lib/nagios/check_init_service $ARG1$
+#command[check_services]=/usr/lib/nagios/check_services -p $ARG1$
+
+### SYSTEM UPDATES ###
+#command[check_yum]=/usr/lib/nagios/check_yum
+#command[check_apt]=/usr/lib/nagios/check_apt
+
+### PROCESSES ###
+#command[check_all_procs]=/usr/lib/nagios/custom_check_procs
+#command[check_procs]=/usr/lib/nagios/check_procs $ARG1$
+
+### OPEN FILES ###
+#command[check_open_files]=/usr/lib/nagios/check_open_files.pl $ARG1$
+
+### NETWORK CONNECTIONS ###
+#command[check_netstat]=/usr/lib/nagios/check_netstat.pl -p $ARG1$ $ARG2$
+
+### ASTERISK ###
+#command[check_asterisk]=/usr/lib/nagios/check_asterisk.pl $ARG1$
+#command[check_sip]=/usr/lib/nagios/check_sip $ARG1$
+#command[check_asterisk_sip_peers]=sudo /usr/lib/nagios/check_asterisk_sip_peers.sh $ARG1$
+#command[check_asterisk_version]=/usr/lib/nagios/nagisk.pl -c version
+#command[check_asterisk_peers]=/usr/lib/nagios/nagisk.pl -c peers
+#command[check_asterisk_channels]=/usr/lib/nagios/nagisk.pl -c channels 
+#command[check_asterisk_zaptel]=/usr/lib/nagios/nagisk.pl -c zaptel 
+#command[check_asterisk_span]=/usr/lib/nagios/nagisk.pl -c span -s 1
diff --git a/nagios-nrpe-config.patch b/nagios-nrpe-config.patch
index 7cd8cd8..e94813e 100644
--- a/nagios-nrpe-config.patch
+++ b/nagios-nrpe-config.patch
@@ -1,14 +1,14 @@
---- nrpe-3.0.orig/sample-config/nrpe.cfg.in	2016-07-12 23:24:40.000000000 +0300
-+++ nrpe-3.0/sample-config/nrpe.cfg.in	2016-09-07 15:46:35.913180521 +0300
-@@ -257,47 +257,8 @@
+--- nrpe-3.2.0/sample-config/nrpe.cfg.in~	2017-06-28 00:13:20.000000000 +0300
++++ nrpe-3.2.0/sample-config/nrpe.cfg.in	2017-07-11 12:15:01.541380203 +0300
+@@ -281,80 +281,4 @@
+ # INCLUDE CONFIG DIRECTORY
  # This directive allows you to include definitions from config files (with a
  # .cfg extension) in one or more directories (with recursion).
- 
+-
 -#include_dir=<somedirectory>
 -#include_dir=<someotherdirectory>
-+include_dir=/etc/nagios/nrpe.d
- 
- 
+-
+-
 -
 -# COMMAND DEFINITIONS
 -# Command definitions that this daemon will run.  Definitions
@@ -31,9 +31,10 @@
 -
 -
 -# The following examples use hardcoded command arguments...
+-# This is by far the most secure method of using NRPE
 -
 -command[check_users]=@pluginsdir@/check_users -w 5 -c 10
--command[check_load]=@pluginsdir@/check_load -w 15,10,5 -c 30,25,20
+-command[check_load]=@pluginsdir@/check_load -r -w .15,.10,.05 -c .30,.25,.20
 -command[check_hda1]=@pluginsdir@/check_disk -w 20% -c 10% -p /dev/hda1
 -command[check_zombie_procs]=@pluginsdir@/check_procs -w 5 -c 10 -s Z
 -command[check_total_procs]=@pluginsdir@/check_procs -w 150 -c 200
@@ -45,9 +46,39 @@
 -# config file is set to '1'.  This poses a potential security risk, so
 -# make sure you read the SECURITY file before doing this.
 -
--#command[check_users]=@pluginsdir@/check_users -w $ARG1$ -c $ARG2$
--#command[check_load]=@pluginsdir@/check_load -w $ARG1$ -c $ARG2$
--#command[check_disk]=@pluginsdir@/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
--#command[check_procs]=@pluginsdir@/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
-+# NOTE:
-+# In PLD Linux, command definitions are in file /etc/nagios/nrpe.d/commands.cfg
+-### MISC SYSTEM METRICS ###
+-#command[check_users]=@pluginsdir@/check_users $ARG1$
+-#command[check_load]=@pluginsdir@/check_load $ARG1$
+-#command[check_disk]=@pluginsdir@/check_disk $ARG1$
+-#command[check_swap]=@pluginsdir@/check_swap $ARG1$
+-#command[check_cpu_stats]=@pluginsdir@/check_cpu_stats.sh $ARG1$
+-#command[check_mem]=@pluginsdir@/custom_check_mem -n $ARG1$
+-
+-### GENERIC SERVICES ###
+-#command[check_init_service]=sudo @pluginsdir@/check_init_service $ARG1$
+-#command[check_services]=@pluginsdir@/check_services -p $ARG1$
+-
+-### SYSTEM UPDATES ###
+-#command[check_yum]=@pluginsdir@/check_yum
+-#command[check_apt]=@pluginsdir@/check_apt
+-
+-### PROCESSES ###
+-#command[check_all_procs]=@pluginsdir@/custom_check_procs
+-#command[check_procs]=@pluginsdir@/check_procs $ARG1$
+-
+-### OPEN FILES ###
+-#command[check_open_files]=@pluginsdir@/check_open_files.pl $ARG1$
+-
+-### NETWORK CONNECTIONS ###
+-#command[check_netstat]=@pluginsdir@/check_netstat.pl -p $ARG1$ $ARG2$
+-
+-### ASTERISK ###
+-#command[check_asterisk]=@pluginsdir@/check_asterisk.pl $ARG1$
+-#command[check_sip]=@pluginsdir@/check_sip $ARG1$
+-#command[check_asterisk_sip_peers]=sudo @pluginsdir@/check_asterisk_sip_peers.sh $ARG1$
+-#command[check_asterisk_version]=@pluginsdir@/nagisk.pl -c version
+-#command[check_asterisk_peers]=@pluginsdir@/nagisk.pl -c peers
+-#command[check_asterisk_channels]=@pluginsdir@/nagisk.pl -c channels 
+-#command[check_asterisk_zaptel]=@pluginsdir@/nagisk.pl -c zaptel 
+-#command[check_asterisk_span]=@pluginsdir@/nagisk.pl -c span -s 1
++include_dir=/etc/nagios/nrpe.d
================================================================

---- gitweb:

http://git.pld-linux.org/gitweb.cgi/packages/nagios-nrpe.git/commitdiff/16af75f012528c3d1105ca0511482495b42da727



More information about the pld-cvs-commit mailing list