[packages/wpa_supplicant] - up to 2.9
arekm
arekm at pld-linux.org
Mon Sep 16 09:09:34 CEST 2019
commit d8a4d05444bba2bb6e17b24d3cf203a137801bc7
Author: Arkadiusz Miśkiewicz <arekm at maven.pl>
Date: Mon Sep 16 09:09:18 2019 +0200
- up to 2.9
...-Avoid-key-reinstallation-in-FT-handshake.patch | 174 --------------
...nstallation-of-an-already-in-use-group-ke.patch | 250 ---------------------
...ection-of-GTK-IGTK-reinstallation-of-WNM-.patch | 184 ---------------
0004-Prevent-installation-of-an-all-zero-TK.patch | 79 -------
...Fix-PTK-rekeying-to-generate-a-new-ANonce.patch | 64 ------
0006-TDLS-Reject-TPK-TK-reconfiguration.patch | 132 -----------
...WNM-Sleep-Mode-Response-without-pending-r.patch | 43 ----
...llow-multiple-Reassociation-Response-fram.patch | 82 -------
dbus-services.patch | 13 +-
wpa_supplicant-gui-qt4.patch | 41 ++++
wpa_supplicant-lrelease.patch | 11 -
wpa_supplicant-lrelease5.patch | 11 -
wpa_supplicant.config | 171 +++++++++++---
wpa_supplicant.spec | 39 +---
14 files changed, 193 insertions(+), 1101 deletions(-)
---
diff --git a/wpa_supplicant.spec b/wpa_supplicant.spec
index 6c896b3..897552a 100644
--- a/wpa_supplicant.spec
+++ b/wpa_supplicant.spec
@@ -11,34 +11,25 @@
Summary: Linux WPA/WPA2/RSN/IEEE 802.1X supplicant
Summary(pl.UTF-8): Suplikant WPA/WPA2/RSN/IEEE 802.1X dla Linuksa
Name: wpa_supplicant
-Version: 2.6
-Release: 4
+Version: 2.9
+Release: 1
License: BSD
Group: Networking
Source0: http://w1.fi/releases/%{name}-%{version}.tar.gz
-# Source0-md5: 091569eb4440b7d7f2b4276dbfc03c3c
+# Source0-md5: 2d2958c782576dc9901092fbfecb4190
Source1: %{name}.config
Source2: %{name}-wpa_gui.desktop
Source3: %{name}.tmpfiles
Source4: %{name}.service
Patch0: %{name}-makefile.patch
Patch1: %{name}-OPTCFLAGS.patch
-Patch2: %{name}-lrelease.patch
+Patch2: %{name}-gui-qt4.patch
# http://www.linuxwimax.org/Download
Patch3: %{name}-0.7.2-generate-libeap-peer.patch
Patch4: dbus-services.patch
-Patch5: 0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
-Patch6: 0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
-Patch7: 0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
-Patch8: 0004-Prevent-installation-of-an-all-zero-TK.patch
-Patch9: 0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
-Patch10: 0006-TDLS-Reject-TPK-TK-reconfiguration.patch
-Patch11: 0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
-Patch12: 0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
-Patch13: %{name}-lrelease5.patch
URL: http://w1.fi/wpa_supplicant/
%{?with_dbus:BuildRequires: dbus-devel}
-BuildRequires: libnl-devel >= 1:3.2
+BuildRequires: libnl-devel >= 1:3.5
BuildRequires: ncurses-devel
BuildRequires: openssl-devel
%{?with_pcsc:BuildRequires: pcsc-lite-devel}
@@ -148,22 +139,9 @@ Pliki programistyczne dla biblioteki eap.
%setup -q
%patch0 -p1
%patch1 -p1
-%if %{without qt5}
-%patch2 -p0
-%endif
+%patch2 -p1
%patch3 -p1
%patch4 -p1
-%patch5 -p1
-%patch6 -p1
-%patch7 -p1
-%patch8 -p1
-%patch9 -p1
-%patch10 -p1
-%patch11 -p1
-%patch12 -p1
-%if %{with qt5}
-%patch13 -p0
-%endif
%{__sed} -i -e 's, at LIB@,%{_lib},' src/eap_peer/libeap0.pc
@@ -207,13 +185,15 @@ cd ../..
%{__make} -C wpa_supplicant wpa_gui-qt4 \
V=1 \
QTDIR=%{_libdir}/qt%{qtver} \
+ QMAKE='qmake-qt5' \
+ LRELEASE='%{_libdir}/qt%{qtver}/bin/lrelease' \
UIC=%{_bindir}/uic-qt%{qtver}
%endif
%{__make} -C src/eap_peer clean
%{__make} -C src/eap_peer \
CC="%{__cc}" \
- CFLAGS="%{rpmcppflags} %{rpmcflags} -MMD -Wall $(pkg-config --cflags libnl-3.0)" \
+ CFLAGS="%{rpmcppflags} %{rpmcflags} -MMD -Wall $(pkg-config --cflags libnl-3.0) -DTLS_DEFAULT_CIPHERS=\\\"PROFILE=SYSTEM:3DES\\\"" \
LDFLAGS="%{rpmldflags} -shared"
%install
@@ -286,7 +266,6 @@ rm -rf $RPM_BUILD_ROOT
%{_mandir}/man8/wpa_supplicant.8*
%if %{with dbus}
%config(noreplace) %verify(not md5 mtime size) /etc/dbus-1/system.d/wpa_supplicant.conf
-%{_datadir}/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service
%{_datadir}/dbus-1/system-services/fi.w1.wpa_supplicant1.service
%{systemdunitdir}/%{name}.service
%endif
diff --git a/0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch b/0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
deleted file mode 100644
index 7276848..0000000
--- a/0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From cf4cab804c7afd5c45505528a8d16e46163243a2 Mon Sep 17 00:00:00 2001
-From: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
-Date: Fri, 14 Jul 2017 15:15:35 +0200
-Subject: [PATCH 1/8] hostapd: Avoid key reinstallation in FT handshake
-
-Do not reinstall TK to the driver during Reassociation Response frame
-processing if the first attempt of setting the TK succeeded. This avoids
-issues related to clearing the TX/RX PN that could result in reusing
-same PN values for transmitted frames (e.g., due to CCM nonce reuse and
-also hitting replay protection on the receiver) and accepting replayed
-frames on RX side.
-
-This issue was introduced by the commit
-0e84c25434e6a1f283c7b4e62e483729085b78d2 ('FT: Fix PTK configuration in
-authenticator') which allowed wpa_ft_install_ptk() to be called multiple
-times with the same PTK. While the second configuration attempt is
-needed with some drivers, it must be done only if the first attempt
-failed.
-
-Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
----
- src/ap/ieee802_11.c | 16 +++++++++++++---
- src/ap/wpa_auth.c | 11 +++++++++++
- src/ap/wpa_auth.h | 3 ++-
- src/ap/wpa_auth_ft.c | 10 ++++++++++
- src/ap/wpa_auth_i.h | 1 +
- 5 files changed, 37 insertions(+), 4 deletions(-)
-
-diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
-index 4e04169..333035f 100644
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -1841,6 +1841,7 @@ static int add_associated_sta(struct hostapd_data *hapd,
- {
- struct ieee80211_ht_capabilities ht_cap;
- struct ieee80211_vht_capabilities vht_cap;
-+ int set = 1;
-
- /*
- * Remove the STA entry to ensure the STA PS state gets cleared and
-@@ -1848,9 +1849,18 @@ static int add_associated_sta(struct hostapd_data *hapd,
- * FT-over-the-DS, where a station re-associates back to the same AP but
- * skips the authentication flow, or if working with a driver that
- * does not support full AP client state.
-+ *
-+ * Skip this if the STA has already completed FT reassociation and the
-+ * TK has been configured since the TX/RX PN must not be reset to 0 for
-+ * the same key.
- */
-- if (!sta->added_unassoc)
-+ if (!sta->added_unassoc &&
-+ (!(sta->flags & WLAN_STA_AUTHORIZED) ||
-+ !wpa_auth_sta_ft_tk_already_set(sta->wpa_sm))) {
- hostapd_drv_sta_remove(hapd, sta->addr);
-+ wpa_auth_sm_event(sta->wpa_sm, WPA_DRV_STA_REMOVED);
-+ set = 0;
-+ }
-
- #ifdef CONFIG_IEEE80211N
- if (sta->flags & WLAN_STA_HT)
-@@ -1873,11 +1883,11 @@ static int add_associated_sta(struct hostapd_data *hapd,
- sta->flags & WLAN_STA_VHT ? &vht_cap : NULL,
- sta->flags | WLAN_STA_ASSOC, sta->qosinfo,
- sta->vht_opmode, sta->p2p_ie ? 1 : 0,
-- sta->added_unassoc)) {
-+ set)) {
- hostapd_logger(hapd, sta->addr,
- HOSTAPD_MODULE_IEEE80211, HOSTAPD_LEVEL_NOTICE,
- "Could not %s STA to kernel driver",
-- sta->added_unassoc ? "set" : "add");
-+ set ? "set" : "add");
-
- if (sta->added_unassoc) {
- hostapd_drv_sta_remove(hapd, sta->addr);
-diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c
-index 3587086..707971d 100644
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -1745,6 +1745,9 @@ int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event)
- #else /* CONFIG_IEEE80211R */
- break;
- #endif /* CONFIG_IEEE80211R */
-+ case WPA_DRV_STA_REMOVED:
-+ sm->tk_already_set = FALSE;
-+ return 0;
- }
-
- #ifdef CONFIG_IEEE80211R
-@@ -3250,6 +3253,14 @@ int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm)
- }
-
-
-+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm)
-+{
-+ if (!sm || !wpa_key_mgmt_ft(sm->wpa_key_mgmt))
-+ return 0;
-+ return sm->tk_already_set;
-+}
-+
-+
- int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm,
- struct rsn_pmksa_cache_entry *entry)
- {
-diff --git a/src/ap/wpa_auth.h b/src/ap/wpa_auth.h
-index 0de8d97..97461b0 100644
---- a/src/ap/wpa_auth.h
-+++ b/src/ap/wpa_auth.h
-@@ -267,7 +267,7 @@ void wpa_receive(struct wpa_authenticator *wpa_auth,
- u8 *data, size_t data_len);
- enum wpa_event {
- WPA_AUTH, WPA_ASSOC, WPA_DISASSOC, WPA_DEAUTH, WPA_REAUTH,
-- WPA_REAUTH_EAPOL, WPA_ASSOC_FT
-+ WPA_REAUTH_EAPOL, WPA_ASSOC_FT, WPA_DRV_STA_REMOVED
- };
- void wpa_remove_ptk(struct wpa_state_machine *sm);
- int wpa_auth_sm_event(struct wpa_state_machine *sm, enum wpa_event event);
-@@ -280,6 +280,7 @@ int wpa_auth_pairwise_set(struct wpa_state_machine *sm);
- int wpa_auth_get_pairwise(struct wpa_state_machine *sm);
- int wpa_auth_sta_key_mgmt(struct wpa_state_machine *sm);
- int wpa_auth_sta_wpa_version(struct wpa_state_machine *sm);
-+int wpa_auth_sta_ft_tk_already_set(struct wpa_state_machine *sm);
- int wpa_auth_sta_clear_pmksa(struct wpa_state_machine *sm,
- struct rsn_pmksa_cache_entry *entry);
- struct rsn_pmksa_cache_entry *
-diff --git a/src/ap/wpa_auth_ft.c b/src/ap/wpa_auth_ft.c
-index 42242a5..e63b99a 100644
---- a/src/ap/wpa_auth_ft.c
-+++ b/src/ap/wpa_auth_ft.c
-@@ -780,6 +780,14 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm)
- return;
- }
-
-+ if (sm->tk_already_set) {
-+ /* Must avoid TK reconfiguration to prevent clearing of TX/RX
-+ * PN in the driver */
-+ wpa_printf(MSG_DEBUG,
-+ "FT: Do not re-install same PTK to the driver");
-+ return;
-+ }
-+
- /* FIX: add STA entry to kernel/driver here? The set_key will fail
- * most likely without this.. At the moment, STA entry is added only
- * after association has been completed. This function will be called
-@@ -792,6 +800,7 @@ void wpa_ft_install_ptk(struct wpa_state_machine *sm)
-
- /* FIX: MLME-SetProtection.Request(TA, Tx_Rx) */
- sm->pairwise_set = TRUE;
-+ sm->tk_already_set = TRUE;
- }
-
-
-@@ -898,6 +907,7 @@ static int wpa_ft_process_auth_req(struct wpa_state_machine *sm,
-
- sm->pairwise = pairwise;
- sm->PTK_valid = TRUE;
-+ sm->tk_already_set = FALSE;
- wpa_ft_install_ptk(sm);
-
- buflen = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) +
-diff --git a/src/ap/wpa_auth_i.h b/src/ap/wpa_auth_i.h
-index 72b7eb3..7fd8f05 100644
---- a/src/ap/wpa_auth_i.h
-+++ b/src/ap/wpa_auth_i.h
-@@ -65,6 +65,7 @@ struct wpa_state_machine {
- struct wpa_ptk PTK;
- Boolean PTK_valid;
- Boolean pairwise_set;
-+ Boolean tk_already_set;
- int keycount;
- Boolean Pair;
- struct wpa_key_replay_counter {
---
-2.7.4
-
diff --git a/0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch b/0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
deleted file mode 100644
index 1802d66..0000000
--- a/0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
+++ /dev/null
@@ -1,250 +0,0 @@
-From 927f891007c402fefd1ff384645b3f07597c3ede Mon Sep 17 00:00:00 2001
-From: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
-Date: Wed, 12 Jul 2017 16:03:24 +0200
-Subject: [PATCH 2/8] Prevent reinstallation of an already in-use group key
-
-Track the current GTK and IGTK that is in use and when receiving a
-(possibly retransmitted) Group Message 1 or WNM-Sleep Mode Response, do
-not install the given key if it is already in use. This prevents an
-attacker from trying to trick the client into resetting or lowering the
-sequence counter associated to the group key.
-
-Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
----
- src/common/wpa_common.h | 11 +++++
- src/rsn_supp/wpa.c | 116 ++++++++++++++++++++++++++++++------------------
- src/rsn_supp/wpa_i.h | 4 ++
- 3 files changed, 87 insertions(+), 44 deletions(-)
-
-diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h
-index af1d0f0..d200285 100644
---- a/src/common/wpa_common.h
-+++ b/src/common/wpa_common.h
-@@ -217,6 +217,17 @@ struct wpa_ptk {
- size_t tk_len;
- };
-
-+struct wpa_gtk {
-+ u8 gtk[WPA_GTK_MAX_LEN];
-+ size_t gtk_len;
-+};
-+
-+#ifdef CONFIG_IEEE80211W
-+struct wpa_igtk {
-+ u8 igtk[WPA_IGTK_MAX_LEN];
-+ size_t igtk_len;
-+};
-+#endif /* CONFIG_IEEE80211W */
-
- /* WPA IE version 1
- * 00-50-f2:1 (OUI:OUI type)
-diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c
-index 3c47879..95bd7be 100644
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -714,6 +714,15 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm,
- const u8 *_gtk = gd->gtk;
- u8 gtk_buf[32];
-
-+ /* Detect possible key reinstallation */
-+ if (sm->gtk.gtk_len == (size_t) gd->gtk_len &&
-+ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) {
-+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
-+ "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)",
-+ gd->keyidx, gd->tx, gd->gtk_len);
-+ return 0;
-+ }
-+
- wpa_hexdump_key(MSG_DEBUG, "WPA: Group Key", gd->gtk, gd->gtk_len);
- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
- "WPA: Installing GTK to the driver (keyidx=%d tx=%d len=%d)",
-@@ -748,6 +757,9 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm,
- }
- os_memset(gtk_buf, 0, sizeof(gtk_buf));
-
-+ sm->gtk.gtk_len = gd->gtk_len;
-+ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len);
-+
- return 0;
- }
-
-@@ -854,6 +866,48 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm,
- }
-
-
-+#ifdef CONFIG_IEEE80211W
-+static int wpa_supplicant_install_igtk(struct wpa_sm *sm,
-+ const struct wpa_igtk_kde *igtk)
-+{
-+ size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher);
-+ u16 keyidx = WPA_GET_LE16(igtk->keyid);
-+
-+ /* Detect possible key reinstallation */
-+ if (sm->igtk.igtk_len == len &&
-+ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) {
-+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
-+ "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)",
-+ keyidx);
-+ return 0;
-+ }
-+
-+ wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
-+ "WPA: IGTK keyid %d pn %02x%02x%02x%02x%02x%02x",
-+ keyidx, MAC2STR(igtk->pn));
-+ wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK", igtk->igtk, len);
-+ if (keyidx > 4095) {
-+ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING,
-+ "WPA: Invalid IGTK KeyID %d", keyidx);
-+ return -1;
-+ }
-+ if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher),
-+ broadcast_ether_addr,
-+ keyidx, 0, igtk->pn, sizeof(igtk->pn),
-+ igtk->igtk, len) < 0) {
-+ wpa_msg(sm->ctx->msg_ctx, MSG_WARNING,
-+ "WPA: Failed to configure IGTK to the driver");
-+ return -1;
-+ }
-+
-+ sm->igtk.igtk_len = len;
-+ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_IEEE80211W */
-+
-+
- static int ieee80211w_set_keys(struct wpa_sm *sm,
- struct wpa_eapol_ie_parse *ie)
- {
-@@ -864,30 +918,14 @@ static int ieee80211w_set_keys(struct wpa_sm *sm,
- if (ie->igtk) {
- size_t len;
- const struct wpa_igtk_kde *igtk;
-- u16 keyidx;
-+
- len = wpa_cipher_key_len(sm->mgmt_group_cipher);
- if (ie->igtk_len != WPA_IGTK_KDE_PREFIX_LEN + len)
- return -1;
-+
- igtk = (const struct wpa_igtk_kde *) ie->igtk;
-- keyidx = WPA_GET_LE16(igtk->keyid);
-- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: IGTK keyid %d "
-- "pn %02x%02x%02x%02x%02x%02x",
-- keyidx, MAC2STR(igtk->pn));
-- wpa_hexdump_key(MSG_DEBUG, "WPA: IGTK",
-- igtk->igtk, len);
-- if (keyidx > 4095) {
-- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING,
-- "WPA: Invalid IGTK KeyID %d", keyidx);
-- return -1;
-- }
-- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher),
-- broadcast_ether_addr,
-- keyidx, 0, igtk->pn, sizeof(igtk->pn),
-- igtk->igtk, len) < 0) {
-- wpa_msg(sm->ctx->msg_ctx, MSG_WARNING,
-- "WPA: Failed to configure IGTK to the driver");
-+ if (wpa_supplicant_install_igtk(sm, igtk) < 0)
- return -1;
-- }
- }
-
- return 0;
-@@ -2307,7 +2345,7 @@ void wpa_sm_deinit(struct wpa_sm *sm)
- */
- void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid)
- {
-- int clear_ptk = 1;
-+ int clear_keys = 1;
-
- if (sm == NULL)
- return;
-@@ -2333,11 +2371,11 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid)
- /* Prepare for the next transition */
- wpa_ft_prepare_auth_request(sm, NULL);
-
-- clear_ptk = 0;
-+ clear_keys = 0;
- }
- #endif /* CONFIG_IEEE80211R */
-
-- if (clear_ptk) {
-+ if (clear_keys) {
- /*
- * IEEE 802.11, 8.4.10: Delete PTK SA on (re)association if
- * this is not part of a Fast BSS Transition.
-@@ -2347,6 +2385,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid)
- os_memset(&sm->ptk, 0, sizeof(sm->ptk));
- sm->tptk_set = 0;
- os_memset(&sm->tptk, 0, sizeof(sm->tptk));
-+ os_memset(&sm->gtk, 0, sizeof(sm->gtk));
-+#ifdef CONFIG_IEEE80211W
-+ os_memset(&sm->igtk, 0, sizeof(sm->igtk));
-+#endif /* CONFIG_IEEE80211W */
- }
-
- #ifdef CONFIG_TDLS
-@@ -2877,6 +2919,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm)
- os_memset(sm->pmk, 0, sizeof(sm->pmk));
- os_memset(&sm->ptk, 0, sizeof(sm->ptk));
- os_memset(&sm->tptk, 0, sizeof(sm->tptk));
-+ os_memset(&sm->gtk, 0, sizeof(sm->gtk));
-+#ifdef CONFIG_IEEE80211W
-+ os_memset(&sm->igtk, 0, sizeof(sm->igtk));
-+#endif /* CONFIG_IEEE80211W */
- #ifdef CONFIG_IEEE80211R
- os_memset(sm->xxkey, 0, sizeof(sm->xxkey));
- os_memset(sm->pmk_r0, 0, sizeof(sm->pmk_r0));
-@@ -2949,29 +2995,11 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf)
- os_memset(&gd, 0, sizeof(gd));
- #ifdef CONFIG_IEEE80211W
- } else if (subelem_id == WNM_SLEEP_SUBELEM_IGTK) {
-- struct wpa_igtk_kde igd;
-- u16 keyidx;
--
-- os_memset(&igd, 0, sizeof(igd));
-- keylen = wpa_cipher_key_len(sm->mgmt_group_cipher);
-- os_memcpy(igd.keyid, buf + 2, 2);
-- os_memcpy(igd.pn, buf + 4, 6);
--
-- keyidx = WPA_GET_LE16(igd.keyid);
-- os_memcpy(igd.igtk, buf + 10, keylen);
--
-- wpa_hexdump_key(MSG_DEBUG, "Install IGTK (WNM SLEEP)",
-- igd.igtk, keylen);
-- if (wpa_sm_set_key(sm, wpa_cipher_to_alg(sm->mgmt_group_cipher),
-- broadcast_ether_addr,
-- keyidx, 0, igd.pn, sizeof(igd.pn),
-- igd.igtk, keylen) < 0) {
-- wpa_printf(MSG_DEBUG, "Failed to install the IGTK in "
-- "WNM mode");
-- os_memset(&igd, 0, sizeof(igd));
-+ const struct wpa_igtk_kde *igtk;
-+
-+ igtk = (const struct wpa_igtk_kde *) (buf + 2);
-+ if (wpa_supplicant_install_igtk(sm, igtk) < 0)
- return -1;
-- }
-- os_memset(&igd, 0, sizeof(igd));
- #endif /* CONFIG_IEEE80211W */
- } else {
- wpa_printf(MSG_DEBUG, "Unknown element id");
-diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h
-index f653ba6..afc9e37 100644
---- a/src/rsn_supp/wpa_i.h
-+++ b/src/rsn_supp/wpa_i.h
-@@ -31,6 +31,10 @@ struct wpa_sm {
- u8 rx_replay_counter[WPA_REPLAY_COUNTER_LEN];
- int rx_replay_counter_set;
- u8 request_counter[WPA_REPLAY_COUNTER_LEN];
-+ struct wpa_gtk gtk;
-+#ifdef CONFIG_IEEE80211W
-+ struct wpa_igtk igtk;
-+#endif /* CONFIG_IEEE80211W */
-
- struct eapol_sm *eapol; /* EAPOL state machine from upper level code */
-
---
-2.7.4
-
diff --git a/0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch b/0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
deleted file mode 100644
index e2937b8..0000000
--- a/0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 8280294e74846ea342389a0cd17215050fa5afe8 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j at w1.fi>
-Date: Sun, 1 Oct 2017 12:12:24 +0300
-Subject: [PATCH 3/8] Extend protection of GTK/IGTK reinstallation of WNM-Sleep
- Mode cases
-
-This extends the protection to track last configured GTK/IGTK value
-separately from EAPOL-Key frames and WNM-Sleep Mode frames to cover a
-corner case where these two different mechanisms may get used when the
-GTK/IGTK has changed and tracking a single value is not sufficient to
-detect a possible key reconfiguration.
-
-Signed-off-by: Jouni Malinen <j at w1.fi>
----
- src/rsn_supp/wpa.c | 53 +++++++++++++++++++++++++++++++++++++---------------
- src/rsn_supp/wpa_i.h | 2 ++
- 2 files changed, 40 insertions(+), 15 deletions(-)
-
-diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c
-index 95bd7be..7a2c68d 100644
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -709,14 +709,17 @@ struct wpa_gtk_data {
-
- static int wpa_supplicant_install_gtk(struct wpa_sm *sm,
- const struct wpa_gtk_data *gd,
-- const u8 *key_rsc)
-+ const u8 *key_rsc, int wnm_sleep)
- {
- const u8 *_gtk = gd->gtk;
- u8 gtk_buf[32];
-
- /* Detect possible key reinstallation */
-- if (sm->gtk.gtk_len == (size_t) gd->gtk_len &&
-- os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) {
-+ if ((sm->gtk.gtk_len == (size_t) gd->gtk_len &&
-+ os_memcmp(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len) == 0) ||
-+ (sm->gtk_wnm_sleep.gtk_len == (size_t) gd->gtk_len &&
-+ os_memcmp(sm->gtk_wnm_sleep.gtk, gd->gtk,
-+ sm->gtk_wnm_sleep.gtk_len) == 0)) {
- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
- "WPA: Not reinstalling already in-use GTK to the driver (keyidx=%d tx=%d len=%d)",
- gd->keyidx, gd->tx, gd->gtk_len);
-@@ -757,8 +760,14 @@ static int wpa_supplicant_install_gtk(struct wpa_sm *sm,
- }
- os_memset(gtk_buf, 0, sizeof(gtk_buf));
-
-- sm->gtk.gtk_len = gd->gtk_len;
-- os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len);
-+ if (wnm_sleep) {
-+ sm->gtk_wnm_sleep.gtk_len = gd->gtk_len;
-+ os_memcpy(sm->gtk_wnm_sleep.gtk, gd->gtk,
-+ sm->gtk_wnm_sleep.gtk_len);
-+ } else {
-+ sm->gtk.gtk_len = gd->gtk_len;
-+ os_memcpy(sm->gtk.gtk, gd->gtk, sm->gtk.gtk_len);
-+ }
-
- return 0;
- }
-@@ -852,7 +861,7 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm,
- (wpa_supplicant_check_group_cipher(sm, sm->group_cipher,
- gtk_len, gtk_len,
- &gd.key_rsc_len, &gd.alg) ||
-- wpa_supplicant_install_gtk(sm, &gd, key_rsc))) {
-+ wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0))) {
- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
- "RSN: Failed to install GTK");
- os_memset(&gd, 0, sizeof(gd));
-@@ -868,14 +877,18 @@ static int wpa_supplicant_pairwise_gtk(struct wpa_sm *sm,
-
- #ifdef CONFIG_IEEE80211W
- static int wpa_supplicant_install_igtk(struct wpa_sm *sm,
-- const struct wpa_igtk_kde *igtk)
-+ const struct wpa_igtk_kde *igtk,
-+ int wnm_sleep)
- {
- size_t len = wpa_cipher_key_len(sm->mgmt_group_cipher);
- u16 keyidx = WPA_GET_LE16(igtk->keyid);
-
- /* Detect possible key reinstallation */
-- if (sm->igtk.igtk_len == len &&
-- os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) {
-+ if ((sm->igtk.igtk_len == len &&
-+ os_memcmp(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len) == 0) ||
-+ (sm->igtk_wnm_sleep.igtk_len == len &&
-+ os_memcmp(sm->igtk_wnm_sleep.igtk, igtk->igtk,
-+ sm->igtk_wnm_sleep.igtk_len) == 0)) {
- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
- "WPA: Not reinstalling already in-use IGTK to the driver (keyidx=%d)",
- keyidx);
-@@ -900,8 +913,14 @@ static int wpa_supplicant_install_igtk(struct wpa_sm *sm,
- return -1;
- }
-
-- sm->igtk.igtk_len = len;
-- os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len);
-+ if (wnm_sleep) {
-+ sm->igtk_wnm_sleep.igtk_len = len;
-+ os_memcpy(sm->igtk_wnm_sleep.igtk, igtk->igtk,
-+ sm->igtk_wnm_sleep.igtk_len);
-+ } else {
-+ sm->igtk.igtk_len = len;
-+ os_memcpy(sm->igtk.igtk, igtk->igtk, sm->igtk.igtk_len);
-+ }
-
- return 0;
- }
-@@ -924,7 +943,7 @@ static int ieee80211w_set_keys(struct wpa_sm *sm,
- return -1;
-
- igtk = (const struct wpa_igtk_kde *) ie->igtk;
-- if (wpa_supplicant_install_igtk(sm, igtk) < 0)
-+ if (wpa_supplicant_install_igtk(sm, igtk, 0) < 0)
- return -1;
- }
-
-@@ -1574,7 +1593,7 @@ static void wpa_supplicant_process_1_of_2(struct wpa_sm *sm,
- if (wpa_supplicant_rsc_relaxation(sm, key->key_rsc))
- key_rsc = null_rsc;
-
-- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc) ||
-+ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 0) ||
- wpa_supplicant_send_2_of_2(sm, key, ver, key_info) < 0)
- goto failed;
- os_memset(&gd, 0, sizeof(gd));
-@@ -2386,8 +2405,10 @@ void wpa_sm_notify_assoc(struct wpa_sm *sm, const u8 *bssid)
- sm->tptk_set = 0;
- os_memset(&sm->tptk, 0, sizeof(sm->tptk));
- os_memset(&sm->gtk, 0, sizeof(sm->gtk));
-+ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep));
- #ifdef CONFIG_IEEE80211W
- os_memset(&sm->igtk, 0, sizeof(sm->igtk));
-+ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep));
- #endif /* CONFIG_IEEE80211W */
- }
-
-@@ -2920,8 +2941,10 @@ void wpa_sm_drop_sa(struct wpa_sm *sm)
- os_memset(&sm->ptk, 0, sizeof(sm->ptk));
- os_memset(&sm->tptk, 0, sizeof(sm->tptk));
- os_memset(&sm->gtk, 0, sizeof(sm->gtk));
-+ os_memset(&sm->gtk_wnm_sleep, 0, sizeof(sm->gtk_wnm_sleep));
- #ifdef CONFIG_IEEE80211W
- os_memset(&sm->igtk, 0, sizeof(sm->igtk));
-+ os_memset(&sm->igtk_wnm_sleep, 0, sizeof(sm->igtk_wnm_sleep));
- #endif /* CONFIG_IEEE80211W */
- #ifdef CONFIG_IEEE80211R
- os_memset(sm->xxkey, 0, sizeof(sm->xxkey));
-@@ -2986,7 +3009,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf)
-
- wpa_hexdump_key(MSG_DEBUG, "Install GTK (WNM SLEEP)",
- gd.gtk, gd.gtk_len);
-- if (wpa_supplicant_install_gtk(sm, &gd, key_rsc)) {
-+ if (wpa_supplicant_install_gtk(sm, &gd, key_rsc, 1)) {
- os_memset(&gd, 0, sizeof(gd));
- wpa_printf(MSG_DEBUG, "Failed to install the GTK in "
- "WNM mode");
-@@ -2998,7 +3021,7 @@ int wpa_wnmsleep_install_key(struct wpa_sm *sm, u8 subelem_id, u8 *buf)
- const struct wpa_igtk_kde *igtk;
-
- igtk = (const struct wpa_igtk_kde *) (buf + 2);
-- if (wpa_supplicant_install_igtk(sm, igtk) < 0)
-+ if (wpa_supplicant_install_igtk(sm, igtk, 1) < 0)
- return -1;
- #endif /* CONFIG_IEEE80211W */
- } else {
-diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h
-index afc9e37..9a54631 100644
---- a/src/rsn_supp/wpa_i.h
-+++ b/src/rsn_supp/wpa_i.h
-@@ -32,8 +32,10 @@ struct wpa_sm {
- int rx_replay_counter_set;
- u8 request_counter[WPA_REPLAY_COUNTER_LEN];
- struct wpa_gtk gtk;
-+ struct wpa_gtk gtk_wnm_sleep;
- #ifdef CONFIG_IEEE80211W
- struct wpa_igtk igtk;
-+ struct wpa_igtk igtk_wnm_sleep;
- #endif /* CONFIG_IEEE80211W */
-
- struct eapol_sm *eapol; /* EAPOL state machine from upper level code */
---
-2.7.4
-
diff --git a/0004-Prevent-installation-of-an-all-zero-TK.patch b/0004-Prevent-installation-of-an-all-zero-TK.patch
deleted file mode 100644
index 22ee217..0000000
--- a/0004-Prevent-installation-of-an-all-zero-TK.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 8f82bc94e8697a9d47fa8774dfdaaede1084912c Mon Sep 17 00:00:00 2001
-From: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
-Date: Fri, 29 Sep 2017 04:22:51 +0200
-Subject: [PATCH 4/8] Prevent installation of an all-zero TK
-
-Properly track whether a PTK has already been installed to the driver
-and the TK part cleared from memory. This prevents an attacker from
-trying to trick the client into installing an all-zero TK.
-
-This fixes the earlier fix in commit
-ad00d64e7d8827b3cebd665a0ceb08adabf15e1e ('Fix TK configuration to the
-driver in EAPOL-Key 3/4 retry case') which did not take into account
-possibility of an extra message 1/4 showing up between retries of
-message 3/4.
-
-Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef at cs.kuleuven.be>
----
- src/common/wpa_common.h | 1 +
- src/rsn_supp/wpa.c | 5 ++---
- src/rsn_supp/wpa_i.h | 1 -
- 3 files changed, 3 insertions(+), 4 deletions(-)
-
-diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h
-index d200285..1021ccb 100644
---- a/src/common/wpa_common.h
-+++ b/src/common/wpa_common.h
-@@ -215,6 +215,7 @@ struct wpa_ptk {
- size_t kck_len;
- size_t kek_len;
- size_t tk_len;
-+ int installed; /* 1 if key has already been installed to driver */
- };
-
- struct wpa_gtk {
-diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c
-index 7a2c68d..0550a41 100644
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -510,7 +510,6 @@ static void wpa_supplicant_process_1_of_4(struct wpa_sm *sm,
- os_memset(buf, 0, sizeof(buf));
- }
- sm->tptk_set = 1;
-- sm->tk_to_set = 1;
-
- kde = sm->assoc_wpa_ie;
- kde_len = sm->assoc_wpa_ie_len;
-@@ -615,7 +614,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm,
- enum wpa_alg alg;
- const u8 *key_rsc;
-
-- if (!sm->tk_to_set) {
-+ if (sm->ptk.installed) {
- wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG,
- "WPA: Do not re-install same PTK to the driver");
- return 0;
-@@ -659,7 +658,7 @@ static int wpa_supplicant_install_ptk(struct wpa_sm *sm,
-
- /* TK is not needed anymore in supplicant */
- os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN);
-- sm->tk_to_set = 0;
-+ sm->ptk.installed = 1;
-
- if (sm->wpa_ptk_rekey) {
- eloop_cancel_timeout(wpa_sm_rekey_ptk, sm, NULL);
-diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h
-index 9a54631..41f371f 100644
---- a/src/rsn_supp/wpa_i.h
-+++ b/src/rsn_supp/wpa_i.h
-@@ -24,7 +24,6 @@ struct wpa_sm {
- struct wpa_ptk ptk, tptk;
- int ptk_set, tptk_set;
- unsigned int msg_3_of_4_ok:1;
-- unsigned int tk_to_set:1;
- u8 snonce[WPA_NONCE_LEN];
- u8 anonce[WPA_NONCE_LEN]; /* ANonce from the last 1/4 msg */
- int renew_snonce;
---
-2.7.4
-
diff --git a/0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch b/0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
deleted file mode 100644
index c19c4c7..0000000
--- a/0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 12fac09b437a1dc8a0f253e265934a8aaf4d2f8b Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j at w1.fi>
-Date: Sun, 1 Oct 2017 12:32:57 +0300
-Subject: [PATCH 5/8] Fix PTK rekeying to generate a new ANonce
-
-The Authenticator state machine path for PTK rekeying ended up bypassing
-the AUTHENTICATION2 state where a new ANonce is generated when going
-directly to the PTKSTART state since there is no need to try to
-determine the PMK again in such a case. This is far from ideal since the
-new PTK would depend on a new nonce only from the supplicant.
-
-Fix this by generating a new ANonce when moving to the PTKSTART state
-for the purpose of starting new 4-way handshake to rekey PTK.
-
-Signed-off-by: Jouni Malinen <j at w1.fi>
----
- src/ap/wpa_auth.c | 24 +++++++++++++++++++++---
- 1 file changed, 21 insertions(+), 3 deletions(-)
-
-diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c
-index 707971d..bf10cc1 100644
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -1901,6 +1901,21 @@ SM_STATE(WPA_PTK, AUTHENTICATION2)
- }
-
-
-+static int wpa_auth_sm_ptk_update(struct wpa_state_machine *sm)
-+{
-+ if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
-+ wpa_printf(MSG_ERROR,
-+ "WPA: Failed to get random data for ANonce");
-+ sm->Disconnect = TRUE;
-+ return -1;
-+ }
-+ wpa_hexdump(MSG_DEBUG, "WPA: Assign new ANonce", sm->ANonce,
-+ WPA_NONCE_LEN);
-+ sm->TimeoutCtr = 0;
-+ return 0;
-+}
-+
-+
- SM_STATE(WPA_PTK, INITPMK)
- {
- u8 msk[2 * PMK_LEN];
-@@ -2458,9 +2473,12 @@ SM_STEP(WPA_PTK)
- SM_ENTER(WPA_PTK, AUTHENTICATION);
- else if (sm->ReAuthenticationRequest)
- SM_ENTER(WPA_PTK, AUTHENTICATION2);
-- else if (sm->PTKRequest)
-- SM_ENTER(WPA_PTK, PTKSTART);
-- else switch (sm->wpa_ptk_state) {
-+ else if (sm->PTKRequest) {
-+ if (wpa_auth_sm_ptk_update(sm) < 0)
-+ SM_ENTER(WPA_PTK, DISCONNECTED);
-+ else
-+ SM_ENTER(WPA_PTK, PTKSTART);
-+ } else switch (sm->wpa_ptk_state) {
- case WPA_PTK_INITIALIZE:
- break;
- case WPA_PTK_DISCONNECT:
---
-2.7.4
-
diff --git a/0006-TDLS-Reject-TPK-TK-reconfiguration.patch b/0006-TDLS-Reject-TPK-TK-reconfiguration.patch
deleted file mode 100644
index e1bd5a5..0000000
--- a/0006-TDLS-Reject-TPK-TK-reconfiguration.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 6c4bed4f47d1960ec04981a9d50e5076aea5223d Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j at w1.fi>
-Date: Fri, 22 Sep 2017 11:03:15 +0300
-Subject: [PATCH 6/8] TDLS: Reject TPK-TK reconfiguration
-
-Do not try to reconfigure the same TPK-TK to the driver after it has
-been successfully configured. This is an explicit check to avoid issues
-related to resetting the TX/RX packet number. There was already a check
-for this for TPK M2 (retries of that message are ignored completely), so
-that behavior does not get modified.
-
-For TPK M3, the TPK-TK could have been reconfigured, but that was
-followed by immediate teardown of the link due to an issue in updating
-the STA entry. Furthermore, for TDLS with any real security (i.e.,
-ignoring open/WEP), the TPK message exchange is protected on the AP path
-and simple replay attacks are not feasible.
-
-As an additional corner case, make sure the local nonce gets updated if
-the peer uses a very unlikely "random nonce" of all zeros.
-
-Signed-off-by: Jouni Malinen <j at w1.fi>
----
- src/rsn_supp/tdls.c | 38 ++++++++++++++++++++++++++++++++++++--
- 1 file changed, 36 insertions(+), 2 deletions(-)
-
-diff --git a/src/rsn_supp/tdls.c b/src/rsn_supp/tdls.c
-index e424168..9eb9738 100644
---- a/src/rsn_supp/tdls.c
-+++ b/src/rsn_supp/tdls.c
-@@ -112,6 +112,7 @@ struct wpa_tdls_peer {
- u8 tk[16]; /* TPK-TK; assuming only CCMP will be used */
- } tpk;
- int tpk_set;
-+ int tk_set; /* TPK-TK configured to the driver */
- int tpk_success;
- int tpk_in_progress;
-
-@@ -192,6 +193,20 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer)
- u8 rsc[6];
- enum wpa_alg alg;
-
-+ if (peer->tk_set) {
-+ /*
-+ * This same TPK-TK has already been configured to the driver
-+ * and this new configuration attempt (likely due to an
-+ * unexpected retransmitted frame) would result in clearing
-+ * the TX/RX sequence number which can break security, so must
-+ * not allow that to happen.
-+ */
-+ wpa_printf(MSG_INFO, "TDLS: TPK-TK for the peer " MACSTR
-+ " has already been configured to the driver - do not reconfigure",
-+ MAC2STR(peer->addr));
-+ return -1;
-+ }
-+
- os_memset(rsc, 0, 6);
-
- switch (peer->cipher) {
-@@ -209,12 +224,15 @@ static int wpa_tdls_set_key(struct wpa_sm *sm, struct wpa_tdls_peer *peer)
- return -1;
- }
-
-+ wpa_printf(MSG_DEBUG, "TDLS: Configure pairwise key for peer " MACSTR,
-+ MAC2STR(peer->addr));
- if (wpa_sm_set_key(sm, alg, peer->addr, -1, 1,
- rsc, sizeof(rsc), peer->tpk.tk, key_len) < 0) {
- wpa_printf(MSG_WARNING, "TDLS: Failed to set TPK to the "
- "driver");
- return -1;
- }
-+ peer->tk_set = 1;
- return 0;
- }
-
-@@ -696,7 +714,7 @@ static void wpa_tdls_peer_clear(struct wpa_sm *sm, struct wpa_tdls_peer *peer)
- peer->cipher = 0;
- peer->qos_info = 0;
- peer->wmm_capable = 0;
-- peer->tpk_set = peer->tpk_success = 0;
-+ peer->tk_set = peer->tpk_set = peer->tpk_success = 0;
- peer->chan_switch_enabled = 0;
- os_memset(&peer->tpk, 0, sizeof(peer->tpk));
- os_memset(peer->inonce, 0, WPA_NONCE_LEN);
-@@ -1159,6 +1177,7 @@ skip_rsnie:
- wpa_tdls_peer_free(sm, peer);
- return -1;
- }
-+ peer->tk_set = 0; /* A new nonce results in a new TK */
- wpa_hexdump(MSG_DEBUG, "TDLS: Initiator Nonce for TPK handshake",
- peer->inonce, WPA_NONCE_LEN);
- os_memcpy(ftie->Snonce, peer->inonce, WPA_NONCE_LEN);
-@@ -1751,6 +1770,19 @@ static int wpa_tdls_addset_peer(struct wpa_sm *sm, struct wpa_tdls_peer *peer,
- }
-
-
-+static int tdls_nonce_set(const u8 *nonce)
-+{
-+ int i;
-+
-+ for (i = 0; i < WPA_NONCE_LEN; i++) {
-+ if (nonce[i])
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+
- static int wpa_tdls_process_tpk_m1(struct wpa_sm *sm, const u8 *src_addr,
- const u8 *buf, size_t len)
- {
-@@ -2004,7 +2036,8 @@ skip_rsn:
- peer->rsnie_i_len = kde.rsn_ie_len;
- peer->cipher = cipher;
-
-- if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0) {
-+ if (os_memcmp(peer->inonce, ftie->Snonce, WPA_NONCE_LEN) != 0 ||
-+ !tdls_nonce_set(peer->inonce)) {
- /*
- * There is no point in updating the RNonce for every obtained
- * TPK M1 frame (e.g., retransmission due to timeout) with the
-@@ -2020,6 +2053,7 @@ skip_rsn:
- "TDLS: Failed to get random data for responder nonce");
- goto error;
- }
-+ peer->tk_set = 0; /* A new nonce results in a new TK */
- }
-
- #if 0
---
-2.7.4
-
diff --git a/0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch b/0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
deleted file mode 100644
index 85ea1d6..0000000
--- a/0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 53c5eb58e95004f86e65ee9fbfccbc291b139057 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j at w1.fi>
-Date: Fri, 22 Sep 2017 11:25:02 +0300
-Subject: [PATCH 7/8] WNM: Ignore WNM-Sleep Mode Response without pending
- request
-
-Commit 03ed0a52393710be6bdae657d1b36efa146520e5 ('WNM: Ignore WNM-Sleep
-Mode Response if WNM-Sleep Mode has not been used') started ignoring the
-response when no WNM-Sleep Mode Request had been used during the
-association. This can be made tighter by clearing the used flag when
-successfully processing a response. This adds an additional layer of
-protection against unexpected retransmissions of the response frame.
-
-Signed-off-by: Jouni Malinen <j at w1.fi>
----
- wpa_supplicant/wnm_sta.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/wpa_supplicant/wnm_sta.c b/wpa_supplicant/wnm_sta.c
-index 1b3409c..67a07ff 100644
---- a/wpa_supplicant/wnm_sta.c
-+++ b/wpa_supplicant/wnm_sta.c
-@@ -260,7 +260,7 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s,
-
- if (!wpa_s->wnmsleep_used) {
- wpa_printf(MSG_DEBUG,
-- "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode has not been used in this association");
-+ "WNM: Ignore WNM-Sleep Mode Response frame since WNM-Sleep Mode operation has not been requested");
- return;
- }
-
-@@ -299,6 +299,8 @@ static void ieee802_11_rx_wnmsleep_resp(struct wpa_supplicant *wpa_s,
- return;
- }
-
-+ wpa_s->wnmsleep_used = 0;
-+
- if (wnmsleep_ie->status == WNM_STATUS_SLEEP_ACCEPT ||
- wnmsleep_ie->status == WNM_STATUS_SLEEP_EXIT_ACCEPT_GTK_UPDATE) {
- wpa_printf(MSG_DEBUG, "Successfully recv WNM-Sleep Response "
---
-2.7.4
-
diff --git a/0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch b/0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
deleted file mode 100644
index b9678f6..0000000
--- a/0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From b372ab0b7daea719749194dc554b26e6367603f2 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j at w1.fi>
-Date: Fri, 22 Sep 2017 12:06:37 +0300
-Subject: [PATCH 8/8] FT: Do not allow multiple Reassociation Response frames
-
-The driver is expected to not report a second association event without
-the station having explicitly request a new association. As such, this
-case should not be reachable. However, since reconfiguring the same
-pairwise or group keys to the driver could result in nonce reuse issues,
-be extra careful here and do an additional state check to avoid this
-even if the local driver ends up somehow accepting an unexpected
-Reassociation Response frame.
-
-Signed-off-by: Jouni Malinen <j at w1.fi>
----
- src/rsn_supp/wpa.c | 3 +++
- src/rsn_supp/wpa_ft.c | 8 ++++++++
- src/rsn_supp/wpa_i.h | 1 +
- 3 files changed, 12 insertions(+)
-
-diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c
-index 0550a41..2a53c6f 100644
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -2440,6 +2440,9 @@ void wpa_sm_notify_disassoc(struct wpa_sm *sm)
- #ifdef CONFIG_TDLS
- wpa_tdls_disassoc(sm);
- #endif /* CONFIG_TDLS */
-+#ifdef CONFIG_IEEE80211R
-+ sm->ft_reassoc_completed = 0;
-+#endif /* CONFIG_IEEE80211R */
-
- /* Keys are not needed in the WPA state machine anymore */
- wpa_sm_drop_sa(sm);
-diff --git a/src/rsn_supp/wpa_ft.c b/src/rsn_supp/wpa_ft.c
-index 205793e..d45bb45 100644
---- a/src/rsn_supp/wpa_ft.c
-+++ b/src/rsn_supp/wpa_ft.c
-@@ -153,6 +153,7 @@ static u8 * wpa_ft_gen_req_ies(struct wpa_sm *sm, size_t *len,
- u16 capab;
-
- sm->ft_completed = 0;
-+ sm->ft_reassoc_completed = 0;
-
- buf_len = 2 + sizeof(struct rsn_mdie) + 2 + sizeof(struct rsn_ftie) +
- 2 + sm->r0kh_id_len + ric_ies_len + 100;
-@@ -681,6 +682,11 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies,
- return -1;
- }
-
-+ if (sm->ft_reassoc_completed) {
-+ wpa_printf(MSG_DEBUG, "FT: Reassociation has already been completed for this FT protocol instance - ignore unexpected retransmission");
-+ return 0;
-+ }
-+
- if (wpa_ft_parse_ies(ies, ies_len, &parse) < 0) {
- wpa_printf(MSG_DEBUG, "FT: Failed to parse IEs");
- return -1;
-@@ -781,6 +787,8 @@ int wpa_ft_validate_reassoc_resp(struct wpa_sm *sm, const u8 *ies,
- return -1;
- }
-
-+ sm->ft_reassoc_completed = 1;
-+
- if (wpa_ft_process_gtk_subelem(sm, parse.gtk, parse.gtk_len) < 0)
- return -1;
-
-diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h
-index 41f371f..56f88dc 100644
---- a/src/rsn_supp/wpa_i.h
-+++ b/src/rsn_supp/wpa_i.h
-@@ -128,6 +128,7 @@ struct wpa_sm {
- size_t r0kh_id_len;
- u8 r1kh_id[FT_R1KH_ID_LEN];
- int ft_completed;
-+ int ft_reassoc_completed;
- int over_the_ds_in_progress;
- u8 target_ap[ETH_ALEN]; /* over-the-DS target AP */
- int set_ptk_after_assoc;
---
-2.7.4
-
diff --git a/dbus-services.patch b/dbus-services.patch
index 59de338..f7f4198 100644
--- a/dbus-services.patch
+++ b/dbus-services.patch
@@ -1,14 +1,5 @@
---- wpa_supplicant-1.0/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in.orig 2012-05-09 23:56:09.000000000 +0200
-+++ wpa_supplicant-1.0/wpa_supplicant/dbus/fi.epitest.hostap.WPASupplicant.service.in 2012-05-22 17:20:59.393121919 +0200
-@@ -1,5 +1,5 @@
- [D-BUS Service]
- Name=fi.epitest.hostap.WPASupplicant
--Exec=@BINDIR@/wpa_supplicant -u
-+Exec=@BINDIR@/wpa_supplicant -c /etc/wpa_supplicant.conf -u
- User=root
- SystemdService=wpa_supplicant.service
---- wpa_supplicant-1.0/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in.orig 2012-05-09 23:56:09.000000000 +0200
-+++ wpa_supplicant-1.0/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in 2012-05-22 17:21:31.359787249 +0200
+--- a/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in.orig 2012-05-09 23:56:09.000000000 +0200
++++ b/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in 2012-05-22 17:21:31.359787249 +0200
@@ -1,5 +1,5 @@
[D-BUS Service]
Name=fi.w1.wpa_supplicant1
diff --git a/wpa_supplicant-gui-qt4.patch b/wpa_supplicant-gui-qt4.patch
new file mode 100644
index 0000000..c54cd9a
--- /dev/null
+++ b/wpa_supplicant-gui-qt4.patch
@@ -0,0 +1,41 @@
+From 9404f356e394604d1d3d6dbffc52abd54260e4d4 Mon Sep 17 00:00:00 2001
+From: Lubomir Rintel <lkundrak at v3.sk>
+Date: Tue, 27 Oct 2015 08:56:35 +0100
+Subject: [PATCH] wpa_supplicant: allow overriding the names of the Qt4 tools
+
+This is useful for distributions that ship different versions of Qt in
+different locations.
+---
+ wpa_supplicant/Makefile | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
+index ad9ead9..b19676d 100644
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -11,6 +11,9 @@ export INCDIR ?= /usr/local/include/
+ export BINDIR ?= /usr/local/sbin/
+ PKG_CONFIG ?= pkg-config
+
++QMAKE ?= qmake
++LRELEASE ?= lrelease
++
+ CFLAGS += $(EXTRA_CFLAGS)
+ CFLAGS += -I$(abspath ../src)
+ CFLAGS += -I$(abspath ../src/utils)
+@@ -1787,10 +1790,10 @@ wpa_gui:
+ @echo "wpa_gui has been removed - see wpa_gui-qt4 for replacement"
+
+ wpa_gui-qt4/Makefile:
+- qmake -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro
++ $(QMAKE) -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro
+
+ wpa_gui-qt4/lang/wpa_gui_de.qm: wpa_gui-qt4/lang/wpa_gui_de.ts
+- lrelease wpa_gui-qt4/wpa_gui.pro
++ $(LRELEASE) wpa_gui-qt4/wpa_gui.pro
+
+ wpa_gui-qt4: wpa_gui-qt4/Makefile wpa_gui-qt4/lang/wpa_gui_de.qm
+ $(MAKE) -C wpa_gui-qt4
+--
+2.6.2
+
diff --git a/wpa_supplicant-lrelease.patch b/wpa_supplicant-lrelease.patch
deleted file mode 100644
index 15c1922..0000000
--- a/wpa_supplicant-lrelease.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- wpa_supplicant/Makefile.orig 2010-09-08 15:34:15.413763615 +0100
-+++ wpa_supplicant/Makefile 2010-09-08 15:36:34.555511910 +0100
-@@ -1357,7 +1357,7 @@
- qmake -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro
-
- wpa_gui-qt4/lang/wpa_gui_de.qm: wpa_gui-qt4/lang/wpa_gui_de.ts
-- lrelease wpa_gui-qt4/wpa_gui.pro
-+ lrelease-qt4 wpa_gui-qt4/wpa_gui.pro
-
- wpa_gui-qt4: wpa_gui-qt4/Makefile wpa_gui-qt4/lang/wpa_gui_de.qm
- $(MAKE) -C wpa_gui-qt4
diff --git a/wpa_supplicant-lrelease5.patch b/wpa_supplicant-lrelease5.patch
deleted file mode 100644
index 3feb164..0000000
--- a/wpa_supplicant-lrelease5.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- wpa_supplicant/Makefile.orig 2010-09-08 15:34:15.413763615 +0100
-+++ wpa_supplicant/Makefile 2010-09-08 15:36:34.555511910 +0100
-@@ -1357,7 +1357,7 @@
- qmake -o wpa_gui-qt4/Makefile wpa_gui-qt4/wpa_gui.pro
-
- wpa_gui-qt4/lang/wpa_gui_de.qm: wpa_gui-qt4/lang/wpa_gui_de.ts
-- lrelease wpa_gui-qt4/wpa_gui.pro
-+ lrelease-qt5 wpa_gui-qt4/wpa_gui.pro
-
- wpa_gui-qt4: wpa_gui-qt4/Makefile wpa_gui-qt4/lang/wpa_gui_de.qm
- $(MAKE) -C wpa_gui-qt4
diff --git a/wpa_supplicant.config b/wpa_supplicant.config
index 370f9f8..d114c1e 100644
--- a/wpa_supplicant.config
+++ b/wpa_supplicant.config
@@ -1,7 +1,9 @@
+# Example wpa_supplicant build time configuration
+#
# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
@@ -32,6 +34,9 @@ CONFIG_DRIVER_WEXT=y
# Driver interface for Linux drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
# driver_nl80211.c requires libnl. If you are compiling it yourself
# you may need to point hostapd to your version of libnl.
#
@@ -71,6 +76,12 @@ CONFIG_LIBNL32=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+CONFIG_DRIVER_MACSEC_LINUX=y
+
# Driver interface for the Broadcom RoboSwitch family
#CONFIG_DRIVER_ROBOSWITCH=y
@@ -81,8 +92,8 @@ CONFIG_DRIVER_WIRED=y
#LIBS += -lsocket -ldlpi -lnsl
#LIBS_c += -lsocket
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5
@@ -101,10 +112,17 @@ CONFIG_EAP_PEAP=y
CONFIG_EAP_TTLS=y
# EAP-FAST
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
-#CONFIG_EAP_FAST=y
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
# EAP-GTC
CONFIG_EAP_GTC=y
@@ -115,11 +133,14 @@ CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
+CONFIG_EAP_PWD=y
# EAP-PAX
CONFIG_EAP_PAX=y
@@ -146,10 +167,10 @@ CONFIG_EAP_GPSK=y
CONFIG_EAP_GPSK_SHA256=y
# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
+CONFIG_EAP_TNC=y
# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
+CONFIG_WPS=y
# Enable WPS external registrar functionality
#CONFIG_WPS_ER=y
# Disable credentials for an open network by default when acting as a WPS
@@ -159,11 +180,14 @@ CONFIG_EAP_GPSK_SHA256=y
CONFIG_WPS_NFC=y
# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
+CONFIG_EAP_IKEV2=y
# EAP-EKE
#CONFIG_EAP_EKE=y
+# MACsec
+CONFIG_MACSEC=y
+
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
@@ -224,6 +248,9 @@ CONFIG_READLINE=y
# wpa_passphrase). This saves about 0.5 kB in code size.
#CONFIG_NO_WPA_PASSPHRASE=y
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+CONFIG_SAE=y
+
# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
@@ -255,7 +282,7 @@ CONFIG_BACKEND=file
# unix = UNIX/POSIX like systems (default)
# win32 = Windows systems
# none = Empty template
-CONFIG_OS=unix
+#CONFIG_OS=unix
# Select event loop implementation
# eloop = select() loop (default)
@@ -268,6 +295,9 @@ CONFIG_OS=unix
# Should we use epoll instead of select? Select is used by default.
#CONFIG_ELOOP_EPOLL=y
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
# Select layer 2 packet implementation
# linux = Linux packet socket (default)
# pcap = libpcap/libdnet/WinPcap
@@ -277,26 +307,33 @@ CONFIG_OS=unix
# none = Empty template
CONFIG_L2_PACKET=linux
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
# IEEE 802.11w (management frame protection), also known as PMF
# Driver support is also needed for IEEE 802.11w.
CONFIG_IEEE80211W=y
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS
# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
# none = Empty template
-#CONFIG_TLS=openssl
+CONFIG_TLS=openssl
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
# can be enabled to get a stronger construction of messages when block ciphers
# are used. It should be noted that some existing TLS v1.0 -based
# implementation may not be compatible with TLS v1.1 message (ClientHello is
# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
+CONFIG_TLSV11=y
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
# can be enabled to enable use of stronger crypto algorithms. It should be
@@ -305,6 +342,10 @@ CONFIG_IEEE80211W=y
# will be used)
CONFIG_TLSV12=y
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+CONFIG_TLS_DEFAULT_CIPHERS="PROFILE=SYSTEM:3DES"
+
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
@@ -327,16 +368,12 @@ CONFIG_TLSV12=y
#CONFIG_NDIS_EVENTS_INTEGRATED=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-#CONFIG_CTRL_IFACE_DBUS=y
-
# Add support for new DBus control interface
# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
# Add support for loading EAP methods dynamically as shared libraries.
# When this option is enabled, each EAP method can be either included
@@ -359,7 +396,7 @@ CONFIG_TLSV12=y
# amount of memory/flash.
#CONFIG_DYNAMIC_EAP_METHODS=y
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
CONFIG_IEEE80211R=y
# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
@@ -368,7 +405,7 @@ CONFIG_DEBUG_FILE=y
# Send debug messages to syslog instead of stdout
CONFIG_DEBUG_SYSLOG=y
# Set syslog facility for debug messages
-CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
# Add support for sending all debug messages (regardless of debug verbosity)
# to the Linux kernel tracing facility. This helps debug the entire stack by
@@ -436,6 +473,11 @@ CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
# that meet the requirements described above.
#CONFIG_NO_RANDOM_POOL=y
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
# IEEE 802.11n (High Throughput) support (mainly for AP mode)
CONFIG_IEEE80211N=y
@@ -451,11 +493,14 @@ CONFIG_IEEE80211AC=y
# This can be used to enable functionality to improve interworking with
# external networks (GAS/ANQP to learn more about the networks and network
# selection based on available credentials).
-#CONFIG_INTERWORKING=y
+CONFIG_INTERWORKING=y
# Hotspot 2.0
CONFIG_HS20=y
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
# Disable roaming in wpa_supplicant
#CONFIG_NO_ROAMING=y
@@ -474,10 +519,10 @@ CONFIG_P2P=y
# Enable TDLS support
#CONFIG_TDLS=y
-# Wi-Fi Direct
-# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
+CONFIG_WIFI_DISPLAY=y
# Autoscan
# This can be used to enable automatic scan support in wpa_supplicant.
@@ -505,3 +550,69 @@ CONFIG_AUTOSCAN_PERIODIC=y
# OS X builds. This is only for building eapol_test.
#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+CONFIG_DPP=y
================================================================
---- gitweb:
http://git.pld-linux.org/gitweb.cgi/packages/wpa_supplicant.git/commitdiff/d8a4d05444bba2bb6e17b24d3cf203a137801bc7
More information about the pld-cvs-commit
mailing list