ERRORS: perl.spec (fwd)
Andrzej Krzysztofowicz
ankry at green.mif.pg.gda.pl
Tue Nov 2 11:06:32 CET 2004
Any ideas what is wrong? 3 times the same effect. Unfortunately, I have no
access to this builder and buildlogs also don't work for it.
============================================================================
PLD ac-i586 builder wrote:
>From builder at betanet.pl Tue Nov 2 10:38:38 2004
From: PLD ac-i586 builder <builder-ac-x86 at pld-linux.org>
To: ankry at green.mif.pg.gda.pl
Date: Tue, 02 Nov 2004 09:38:37 +0000
Subject: ERRORS: perl.spec
perl.spec (auto-ac-perl-5_8_5-6): FAILED
--- perl.spec:auto-ac-perl-5_8_5-6:
Build-Time: user:4051.80s sys:78.10s real:4640.65s (faults io:0 non-io:5901044)
*** buildlog for perl.spec
request from: ankry
started at: Tue Nov 2 09:21:16 2004
fetching http://ep09.pld-linux.org/~buildsrc/srpms/f00b507b-ea62-4922-a4ab-f7ab64012e8f/perl-5.8.5-6.src.rpm
fetched 9506740 bytes, 481.6 K/s
installing srpm: perl-5.8.5-6.src.rpm
Parsing SELinux file contexts skipped: /etc/security/selinux/src/policy/file_contexts/file_contexts: No such file or directory
checking BR
no BR needed
building RPM using: cd rpm/SPECS; TMPDIR=/tmp/B.882080 nice -n 0 rpmbuild -bb --target i586-pld-linux perl.spec
Building target platforms: i586-pld-linux
Building for target i586-pld-linux
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.72247
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ :
+ cd /home/users/builder/rpm/BUILD
+ rm -rf perl-5.8.5
+ /usr/bin/bzip2 -dc /home/users/builder/rpm/SOURCES/perl-5.8.5.tar.bz2
+ tar -xf -
+ STATUS=0
+ [ 0 -ne 0 ]
+ cd perl-5.8.5
+ /bin/id -u
+ [ 502 = 0 ]
+ true .
+ /bin/chmod -Rf a+rX,g-w,o-w .
+ echo Patch #0 (perl_581-noroot_install.patch):
Patch #0 (perl_581-noroot_install.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_581-noroot_install.patch
+ echo Patch #1 (perl_581-INC.patch):
Patch #1 (perl_581-INC.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_581-INC.patch
+ echo Patch #3 (perl_580-errno_h-parsing.patch):
Patch #3 (perl_580-errno_h-parsing.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_580-errno_h-parsing.patch
+ echo Patch #4 (perl_580-use-LD_PRELOAD-for-libperl.so.patch):
Patch #4 (perl_580-use-LD_PRELOAD-for-libperl.so.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_580-use-LD_PRELOAD-for-libperl.so.patch
+ echo Patch #5 (perl_581-soname.patch):
Patch #5 (perl_581-soname.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_581-soname.patch
+ echo Patch #6 (perl-test-noproc.patch):
Patch #6 (perl-test-noproc.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl-test-noproc.patch
+ echo Patch #7 (perl_585-microperl_uconfig.patch):
Patch #7 (perl_585-microperl_uconfig.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/perl_585-microperl_uconfig.patch
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.49423
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd perl-5.8.5
+ LANG=C
+ export LANG
+ unset DISPLAY
+ :
+ sh Configure -des -Dcc=i586-pld-linux-gcc -Darchname=i586-pld-linux -Dcccdlflags=-fPIC -Dccdlflags=-rdynamic -Dldlibpthname=none -Doptimize=-O2 -march=i586 -Duseshrplib -Dd_dosuid -Dman1dir=/usr/share/man/man1 -Dman1ext=1 -Dman3dir=/usr/share/man/man3 -Dman3ext=3perl -Dvendorman1dir=/usr/share/man/man1 -Dvendorman1ext=1p -Dvendorman3dir=/usr/share/man/man3 -Dvendorman3ext=3pm -Dsiteman1dir=/usr/local/man/man1 -Dsiteman1ext=1p -Dsiteman3dir=/usr/local/man/man3 -Dsiteman3ext=3pm -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dlibpth=/usr/lib /lib -Dprivlib=/usr/share/perl5/5.8.5 -Darchlib=/usr/lib/perl5/5.8.5/i586-pld-linux-thread-multi -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib/perl5/5.8.0/i586-pld-linux-thread-multi -Dvendorlib=/usr/share/perl5/vendor_perl -Dvendorarch=/usr/lib/perl5/vendor_perl/5.8.0/i586-pld-linux-thread-multi -Ui_db -Ui_dbm -Di_gdbm -Ui_ndbm -Dlibswanted=dl m c crypt gdbm -Dusethreads -Duselargefiles
(I see you are using the Korn shell. Some ksh's blow up on Configure,
mainly on older exotic systems. If yours does, try the Bourne shell instead.)
First let's make sure your kit is complete. Checking...
Locating common programs...
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1 dos_djgpp isc_2 os2 svr4
aix dynix linux os390 svr5
aix_3 dynixptx lynxos os400 ti1500
aix_4 epix machten posix-bc titanos
altos486 esix4 machten_2 powerux ultrix_4
amigaos fps mint qnx umips
apollo freebsd mips rhapsody unicos
atheos genix mpc sco unicosmk
aux_3 gnu mpeix sco_2_3_0 unisysdynix
beos greenhills ncr_tower sco_2_3_1 utekv
bsdos hpux netbsd sco_2_3_2 uts
convexos i386 newsos4 sco_2_3_3 uwin
cxux irix_4 next_3 sco_2_3_4 vmesa
cygwin irix_5 next_3_0 solaris_2 vos
darwin irix_6 next_4 stellar
dcosx irix_6_0 nonstopux sunos_4_0
dec_osf irix_6_1 openbsd sunos_4_1
dgux isc opus super-ux
Which of these apply, if any? [linux]
You appear to have ELF support. I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]
[...]
lib/Tie/File/t/08_ro......................ok
lib/Tie/File/t/09_gen_rs..................ok
lib/Tie/File/t/10_splice_rs...............ok
lib/Tie/File/t/11_rv_splice_rs............ok
lib/Tie/File/t/12_longfetch_rs............ok
lib/Tie/File/t/13_size_rs.................ok
lib/Tie/File/t/14_lock....................ok
lib/Tie/File/t/15_pushpop.................ok
lib/Tie/File/t/16_handle..................ok
lib/Tie/File/t/17_misc_meth...............ok
lib/Tie/File/t/18_rs_fixrec...............ok
lib/Tie/File/t/19_cache...................ok
lib/Tie/File/t/20_cache_full..............ok
lib/Tie/File/t/21_win32...................skipping test on this platform
lib/Tie/File/t/22_autochomp...............ok
lib/Tie/File/t/23_rv_ac_splice............ok
lib/Tie/File/t/24_cache_loop..............ok
lib/Tie/File/t/25_gen_nocache.............ok
lib/Tie/File/t/26_twrite..................ok
lib/Tie/File/t/27_iwrite..................ok
lib/Tie/File/t/28_mtwrite.................ok
lib/Tie/File/t/29a_upcopy.................ok
lib/Tie/File/t/29_downcopy................ok
lib/Tie/File/t/30_defer...................ok
lib/Tie/File/t/31_autodefer...............ok
lib/Tie/File/t/32_defer_misc..............ok
lib/Tie/File/t/33_defer_vs................ok
lib/Tie/File/t/40_abs_cache...............ok
lib/Tie/File/t/41_heap....................ok
lib/Tie/File/t/42_offset..................ok
lib/Tie/Handle/stdhandle..................ok
lib/Tie/Memoize...........................ok
lib/Tie/RefHash...........................ok
lib/Tie/Scalar............................ok
lib/Tie/SubstrHash........................ok
lib/Time/gmtime...........................ok
lib/Time/Local............................ok
lib/Time/localtime........................ok
lib/Unicode/Collate/t/altern..............ok
lib/Unicode/Collate/t/contract............ok
lib/Unicode/Collate/t/hangtype............ok
lib/Unicode/Collate/t/hangul..............ok
lib/Unicode/Collate/t/illegalp............ok
lib/Unicode/Collate/t/illegal.............ok
lib/Unicode/Collate/t/index...............ok
lib/Unicode/Collate/t/normal..............ok
lib/Unicode/Collate/t/rearrang............ok
lib/Unicode/Collate/t/test................ok
lib/Unicode/Collate/t/trailwt.............ok
lib/Unicode/Collate/t/variable............ok
lib/Unicode/Collate/t/version.............ok
lib/Unicode/Collate/t/view................ok
lib/Unicode/UCD...........................ok
lib/User/grent............................ok
lib/User/pwent............................ok
lib/utf8..................................ok
lib/vars..................................ok
lib/vmsish................................ok
lib/warnings..............................ok
t/pod/emptycmd............................ok
t/pod/find................................ok
t/pod/for.................................ok
t/pod/headings............................ok
t/pod/include.............................ok
t/pod/included............................ok
t/pod/lref................................ok
t/pod/multiline_items.....................ok
t/pod/nested_items........................ok
t/pod/nested_seqs.........................ok
t/pod/oneline_cmds........................ok
t/pod/plainer.............................ok
t/pod/pod2usage...........................ok
t/pod/poderrs.............................ok
t/pod/podselect...........................ok
t/pod/special_seqs........................ok
t/x2p/s2p.................................ok
Failed 1 test script out of 844, 99.88% okay.
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded.
u=2.12 s=0.57 cu=3775.07 cs=53.17 scripts=844 tests=85471
make[2]: *** [_test_notty] Error 1
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/perl-5.8.5'
make[1]: *** [_test] Error 2
make[1]: Leaving directory `/home/users/builder/rpm/BUILD/perl-5.8.5'
make: *** [test] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.49423 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.49423 (%build)
error: No files produced.
Begin-PLD-Builder-Info
Build-Time: user:4051.80s sys:78.10s real:4640.65s (faults io:0 non-io:5901044)
End-PLD-Builder-Info
--
=======================================================================
Andrzej M. Krzysztofowicz ankry at mif.pg.gda.pl
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Gdansk University of Technology
More information about the pld-devel-en
mailing list