Karty sieciowe.

[Piotr Grochowski]

Witam.
Każdego, kto kiedykolwiek próbował konfigurować karty sieciowe pod linuxem
(moduły) proszę o przeglądnięcie pliku będącego na ataczu pod kątem tamtej
właśnie karty -- czy wszystko się zgadza, czy wszystkie parametry są
obecne. Jeżeli znajdzie się jakiś błąd, lub czegoś brakuje, proszę o
kontakt (na prova najlepiej). 

Jakby ktoś był ciekaw co to właściwie jest -- to od razu wyjaśniam, że
jest to fragment instalatora.

PaGer

-- 
       _______/ P i o t r   G r o c h o w s k i \______
 /\___/  e-mail: pager w dione.ids.pl, pager w kki.net.pl, \___/\
<  ___       ________pager w viii-lo.krakow.pl_____       ___  >
 \/   \_____/ Get your copy of Dial Up Timer at: \_____/   \/
            \__http://dutimer.viii-lo.krakow.pl__/
-------------- następna część ---------
<modules_config>

<3c501>
module  = 3c501.o
devname = "3COM 3c501 Ethernet (10/100Mbit) Card (ISA/EISA/PCI)"
type    = net
device  = eth
params  = io, irq
values  = io: 0x280, 0x300; irq: 5

<description>
</description>

</3c501>


<3c503>
module  = 3c503.o
devname = "3COM 3c503 Ethernet (10/100Mbit) Card (ISA/EISA/PCI)"
type    = net
device  = eth
params  = io, irq, xcvr
values  = io: 0, 0x300, 0x310, 0x330, 0x350, 0x250, 0x280, 0x2A0, 0x2E0; \
	    irq: 0; xcvr: 0, 1

<description>
</description>

</3c503>


<3c505>
module  = 3c505.o
devname = "3COM 3c505 Ethernet (10/100Mbit) Card (ISA/EISA/PCI)"
type    = net
device  = eth
params  = io,irq
values  = io: 0x300, 0x280, 0x310; irq: 0

<description>
</description>

</3c505>


<3c507>
module  = 3c507.o
devname = "3COM 3c507 Ethernet (10/100Mbit) Card (ISA/EISA/PCI)"
type    = net
device  = eth
params  = io, irq
values  = io: 0x300, 0x320, 0x340, 0x280; irq: 0

<description>
</description>

</3c507>


<3c509>
module  = 3c509.o
devname = "3COM 3c509/3c579 Ethernet (10/100Mbit) Card (ISA/EISA/PCI)"
type    = net
device  = eth
params  = io, irq
values  = io: 0; irq:0

<description>
</description>

</3c509>


<ac3200>
module  = ac3200.o
devname = "Ansel Communications EISA ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0, 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000,0x7000, \
          0x8000, 0x8fff; irq: 0

<description>
</description>

</ac3200>


<apricot>
module  = apricot.o
devname = "Apricot 82596 ethernet adaptor"
type    = net
device  = eth
params  = io,irq
values  = io: 0x300; irq: 10

<description>
</description>

</apricot>


<arcnet>
module  = arcnet.o
devname = "ARCnet"
type    = net
device  = eth
params  = io, irqnum, shmem, num
values  = io: 0, 0x300, 0x2E0, 0x2F0, 0x2D0, 0x200, 0x210, 0x220, 0x230, \
              0x240, 0x250, 0x260, 0x270, 0x280, 0x290, 0x2A0, 0x2B0, 0x2C0, \
	      0x310, 0x320, 0x330, 0x340, 0x350, 0x360, 0x370, 0x380, 0x390, \
	      0x3A0, 0x3E0, 0x3F0; irqnum: 0; shmem: 0; num: 0

<description>
</description>

</arcnet>


<at1700>
module  = at1700.o
devname = "Allied Telesis AT1700"
type    = net
device  = eth
params  = io, irq
values  = io: 0x260, 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300; \
          irq: 0

<description>
</description>

</at1700>


<de4x5>
module  = de4x5.o
devname = "DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500 ethernet adaptor"
type    = net
device  = eth
params  = io, irq, is_not_dec
values  = io: 0x000b; irq: 10; is_not_dec: 0, 1

<description>
</description>

</de4x5>


<de600>
module  = de600.o
devname = "D-Link DE-600 Ethernet pocket adapter"
type    = net
device  = eth
params  = de600_debug
values  = de600_debug: 0

<description>
</description>

</de600>


<de620>
module  = de620.o
devname = "D-Link DE-620 Ethernet pocket adapter"
type    = net
device  = eth
params  = bnc, utp, io, irq
values  = bnc: 0; utp: 0; io: 0x378; irq: 7

<description>
</description>

</de620>


<depca>
module  = depca.o
devname = "A DIGITAL DEPCA & EtherWORKS ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0x200, 0x300, 0x200, 0x0c00; irq: 7

<description>
</description>

</depca>


<e2100>
module  = e2100.o
devname = "Cabletron E2100 series ethernet adaptor"
type    = net
device  = eth
params  = io, irq, mem, xcvr
values  = io: 0, 0x300, 0x280, 0x380, 0x220; irq: 0; mem: 0; xcvr: 0, 1

<description>
</description>

</e2100>


<eepro>
module  = eepro.o
devname = "Intel EtherExpress Pro/10"
type    = net
device  = eth
params  = io, irq
values  = io: 0x200, 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360; \
          irq: 0

<description>
</description>

</eepro>


<eexpress>
module  = eexpress.o
devname = "Intel EtherExpress"
type    = net
device  = eth
params  = io, irq
values  = io: 0x300, 0x300, 0x270, 0x320, 0x340; irq: 0

<description>
</description>

</eexpress>


<ewrk3>
module  = ewrk3.o
devname = "DIGITAL EtherWORKS 3 ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0x300, 0x100, 0x120, 0x140, 0x160, 0x180, 0x1A0, 0x1C0, 0x200, \
              0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0, 0x300, 0x340, \
	      0x360, 0x380, 0x3A0, 0x3C0; irq: 5

<description>
</description>

</ewrk3>


<hp-plus>
module  = hp-plus.o
devname = "HP PCLAN/plus ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0, 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340; irq: 0		(IRQ read from configuration register)

<description>
</description>

</hp-plus>


<hp>
module  = hp.o
devname = "HP LAN ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0, 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240; irq: 0

<description>
</description>

</hp>


<hp100>
module  = hp100.o
devname = "100VG-AnyLan Network Adapter"
type    = net
device  = eth
params  = hp100_port
values  = hp100_port: 0, 0x100, 0x120, 0x140, 0x160, 0x180, 0x1A0, 0x1C0, \
                      0x1E0, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, \
		      0x2E0, 0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, \
		      0x3E0

<description>
</description>

</hp100>


<ibmtr>
module  = ibmtr.o
devname = "IBM Token Ring 16/4"
type    = net
device  = eth
params  = io
values  = io: 0xA20, 0xA20, 0xA24, 0x220, 0x224

<description>
</description>

</ibmtr>


<ne>
module  = ne.o
devname = "NS8390 ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0, 0x300, 0x280, 0x320, 0x340, 0x360; irq: 0

<description>
</description>

</ne>


<smc-ultra>
module  = smc-ultra.o
devname = "SMC Ultra ethernet adaptor"
type    = net
device  = eth
params  = io, irq
values  = io: 0, 0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380; irq: 0

<description>
</description>

</smc-ultra>


<tulip>
module  = tulip.o
devname = "DEC 21040-family ethernet adaptor"
type    = net
device  = eth
params  = 
values  = 

<description>
</description>

</tulip>


<wavelan>
module  = wavelan.o
devname = "AT&T GIS (nee NCR) WaveLAN card"
type    = net
device  = eth
params  = io, irq
values  = io: 0x390; irq: 0

<description>
</description>

</wavelan>

<wd>
module  = wd.o
devname = "WD80x3 ethernet adaptor"
type    = net
device  = eth
params  = io, irq, mem, mem_end
values  = io: 0, 0x300, 0x280, 0x380, 0x240; irq: 0; mem: 0; mem_end: 0

<description>
</description>

</wd>

</modules_config>