tetex.spec

[Paweł Sikora]

fazy %prep, %build przechodza ok, ale na %install sie wykrzacza:

if test -f /tmp/tetex-2.0.2-root-root/usr/bin/mktexlsr; then \
  TEXMFMAIN=/tmp/tetex-2.0.2-root-root/usr/share/texmf 
PATH=/tmp/tetex-2.0.2-root-root/usr/bin:/tmp/tetex-2.0.2-root-root/usr/bin:
   /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/root/bin \
    /tmp/tetex-2.0.2-root-root/usr/bin/mktexlsr; \
else :; fi
mktexlsr: Updating /tmp/tetex-2.0.2-root-root/usr/share/texmf/ls-R...
mktexlsr: Updating /var/cache/fonts/ls-R...
mktexlsr: Done.
if test -f /tmp/tetex-2.0.2-root-root/usr/bin/fmtutil; then \
  TEXMFMAIN=/tmp/tetex-2.0.2-root-root/usr/share/texmf 
PATH=/tmp/tetex-2.0.2-root-root/usr/bin:/tmp/tetex-2.0.2-root-root/usr/bin:
    /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/root/bin \
    /tmp/tetex-2.0.2-root-root/usr/bin/fmtutil --all; \
else :; fi
fmtutil: config file `fmtutil.cnf' not found.
make: *** [init] Błąd 1
błąd: Błędny status wyjścia z /var/tmp/rpm-tmp.86682 (%install)

Błędy budowania RPM-a:
    Błędny status wyjścia z /var/tmp/rpm-tmp.86682 (%install)


zainstalowalem wiec do testu paczke z ftp->dist->ac
i fmtutil --all nadal sie wykrzacza.

[root w pluto SPECS]# find / -type f -iname fmtutil.cnf
/usr/share/texmf/web2c/fmtutil.cnf
[root w pluto SPECS]# fmtutil --all
fmtutil: config file `fmtutil.cnf' not found.

bez dzialajacego fmtutil --all nie zbuduje jadetex'a :|

mozna na sile zapodac:
[root w pluto SPECS]# fmtutil --cnffile /usr/share/texmf/web2c/fmtutil.cnf --all
ale nie w tym sek, by na sile.

-- 
The only thing necessary for the triumph of evil
  is for good men to do nothing.
                                           - Edmund Burke