problemy z instalacja przez siec
Pawel Koska
pawel at artfan.net
Mon Aug 16 15:10:11 CEST 2004
Chcialbym sie poskarzyc ze mam problemy z instalacja przez siec.
W czym jest problem ?? Nie wiem, chyba brakuje jakiegos pakietu na ftp
(bdflush) Wrzuce raport ktory instalator wyplul bo tam jest wiecej
informacji :)
--
Pozdrowienia,
Pawel Koska
-------------- next part --------------
a
BUG: ----------------------------------------------------------------------
BUG: Please write your bug report here (i.e. what happened, that you think
BUG: is a bug).
BUG: Lines starting with BUG: are automatically removed from the message.
BUG: In order to leave this editor (you'll be asked if you want to save
BUG: the file) press <ESC>:q<ENTER>.
BUG: ----------------------------------------------------------------------
BUG: Don't forget to write your email somewhere here, in case we'll
BUG: have to contact you!
BUG: ----------------------------------------------------------------------
BUG: Below is contest of few configuration files, log files and output
BUG: of few commands. Please check if they doesn't contain confidential
BUG: information. OTOH: this files will probably help us diagnose your
BUG: problem.
BUG: ----------------------------------------------------------------------
=================================================================
=== /etc/installer.conf
=================================================================
##
## Generated automatically by ui at Mon Aug 16 14:56:56 UTC 2004
##
# source is one of:
# - net - ftp, http. source_filesystem has to be net
# - nfs - nfs server. source_filesystem has to be nfs
# - cdrom
# - disk
# source_filesystem: ex: iso9660, ext2
# source_device: either /dev/XXX for mount, or machine name for nfs, or
# server name with optional protocol for net, ftp:// is the default.
# source_dir: exact directory where installation files
# (RPMS and installer directory) reside
# source_additional: space separated, additional sources for package
# installation. You need to specify http://, ftp:// or file://.
source="net"
source_device="ftp://ftp.pld-linux.org"
source_filesystem="net"
source_dir="//dists/2.0/PLD/i686"
source_additional=""
# net_device: example: eth0
# net_device_module: examples: ne2k-pci, auto
# net_device_options: ex: io=0x300
# net_ipaddr: ex: 192.168.1.1
# net_prefix: ex: 24
# net_gateway: ex: 192.168.1.254, or "" when none
# net_dns: space separated list of (up to 3) IP's of DNS'es
# net_v6: yes, no or auto : whatever to use IPv6 for interfaces
# configuration. If auto it is determined based upon
# net_ipaddr.
# net_proxy: http/ftp proxy to be used during installation. It is an
# an URL. Examples: "http://squid.foobar.com:3128/",
# "http://user:pass@squid.foobar.com:3128/"
# NOTE: it is used only if it's set to something else then
# "" or "none". snarf is used for all file transfers then
# (even rpms for poldek).
net_device="eth0"
net_device_module="auto"
net_device_module_options=""
net_ipaddr="192.168.1.12"
net_prefix="24"
net_gateway="192.168.1.1"
net_dns="212.76.39.45"
net_v6="no"
net_proxy=""
# space delimited SCSI hostadapters (can be auto, for PCI SCSI card)
# hardware raid modules don't need to be listed here
scsi_hostadapters="auto"
# PCMCIA controller (can be auto)
pcmcia_controller="auto"
# dest_devices: space delimited list of target devices
# (like '/dev/hda /dev/sdb')
# dest_devices_actions: space delimited list, one of items below per device:
# - make_new
# - use_existing
#
# dest_partID_VAL: ID is positive integer, VAL is one of
# device: ex: /dev/hda7 (for use_existing), /dev/hda (for make_new)
# size: ex: 177 (177 megabytes), 50% of all, 100% of free
# filesystem: swap, ext2, reiserfs, jfs, ext3, xfs, md
# format_partition: yes or no
# mnt_point: ex: '/var/spool', '/', '' allowed for swaps
# options: options for fstab (ex: 'noexec')
# format_options: options for mkfs
#
# it's not allowed to have gaps in partition numbering, i.e.
# to have dest_part1_device, dest_part2_device and dest_part4_device
# set (while no dest_part3_device).
# Numeration starts at 1.
dest_devices=" /dev/hda"
dest_devices_actions=" use_existing"
#
# partition 1
#
dest_part1_device="/dev/hda1"
dest_part1_size="8189"
dest_part1_filesystem="reiserfs"
dest_part1_format_partition="yes"
dest_part1_mnt_point="/"
dest_part1_options="defaults"
dest_part1_format_options=""
#
# partition 2
#
dest_part2_device="/dev/hda2"
dest_part2_size="510"
dest_part2_filesystem="swap"
dest_part2_format_partition="yes"
dest_part2_mnt_point="swap"
dest_part2_options="defaults"
dest_part2_format_options=""
# Section: packages installation
# pkgs_installer: one of poldek, wuch, apt. Only poldek
# supported at the very moment
# pkgs_install_docs: yes or no. Whatever to install documentation for
# packages.
# pkgs_install_langs: %_install_langs rpm macro (all, pl:pl_PL:en:en_US)
# pkgs_cpus: number or "auto". Number of CPUs in installed system. If more
# then one -- install kernel-smp instead of normal. In future
# we might do some configuration tweaks for SMP.
pkgs_installer="poldek"
pkgs_install_docs="yes"
pkgs_install_langs="pl:pl_PL"
pkgs_cpus="auto"
# Section: boot loader
# boot loader to install, possible values:
# - lilo - generate /etc/lilo.conf, and run lilo
# - rc-boot - generate configs for rc-boot, you need to select one of
# lilo or grub packages to actually have some bootloader (otherwise
# poldek will do it for you, randomly :^)
# - none (or empty) - don't install bootloader
boot_loader="rc-boot"
# Device to install bootloader on. If it is set to "auto", then device part
# (i.e. without partition number) of /boot (or / if no /boot) partition is
# taken.
boot_loader_device="auto"
# other systems on this box, space delimited list of entries
# - bsd:LABEL:ROOT_DEVICE - bsd, bootloader installed on ROOT_DEVICE
# - dos:LABEL:ROOT_DEVICE - same, for dos
# - linux:LABEL:KERNEL:[INITRD:]ROOT_DEVICE - KERNEL is sth like
# /boot/vmlinuz-2.4.13-debian
# example: "bsd:obsd:/dev/hdb3 dos:winda:/dev/hda2
# linux:debian:/boot/vmlinuz-debian:/dev/hda3
# linux:old-pld:/boot/initrd-pld-old:/boot/vmlinuz-pld-old:/dev/hdc3"
boot_loader_other=""
# The end.
=== EOF /etc/installer.conf
=================================================================
=== /etc/installer.sysconf
=================================================================
# language to be used on installed system (ex: pl_PL, en_US, '')
lang="pl_PL"
# timezone to be set (ex: Europe/Warsaw, America/Vancuver)
timezone="Europe/Warsaw"
# system clock is in UTC? ("yes" or "no")
clock_utc="yes"
# network configuration
net_config="installer_settings"
net_hostname="pldmachine"
net_domainname="localdomain"
net_gateway="192.168.1.1"
net_dns="212.76.39.45"
net_device="eth0"
net_device_module="auto"
net_ipaddr="192.168.1.12"
net_prefix="24"
# superuser password
root_pass="hasloroota"
# user to be added.
user_realname="Pawel"
user_name="pawel"
user_pass="haslopawla"
=== EOF /etc/installer.sysconf
=================================================================
=== /etc/installer.pkgs
=================================================================
syslog-ng
lilo
FHS
SysVinit
basesystem
bdflush
chkconfig
cpio
cracklib
cracklib-dicts
dev
findutils
fix-info-dir
geninitrd
genromfs
gettext
glibc
grep
gzip
iproute2
issue
kbd
kernel
login
logrotate
losetup
mawk
mingetty
mktemp
modutils
mount
net-tools
pam
pciutils
pdksh
poldek
pldbug
procps
rc-scripts
rpm
sed
setserial
setup
shadow
tar
utempter
util-linux
vim-static
which
reiserfsprogs
rc-boot
=== EOF /etc/installer.pkgs
=================================================================
=== /var/log/installer
=================================================================
[installer-prep-source 14:47:59 2] £adujê modu³ 3c59x
Using /lib/modules/2.4.20/3c59x.o
[installer-prep-source 14:47:59 2] Setting address 192.168.1.12/24 for eth0
[installer-prep-source 14:47:59 2] Adding default route via 192.168.1.1 dev eth0
[installer-prep-source 14:47:59 2] Net device eth0 configured
[installer-prep-source 14:47:59 2] £adujê ide-mod
[installer-prep-source 14:47:59 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/ide-mod.tar.gz
[installer-prep-source 14:48:02 2] £adujê modu³ ide-mod
Using /lib/modules/2.4.20/ide-mod.o
[installer-prep-source 14:48:02 2] £adujê modu³ ide-probe-mod
Using /lib/modules/2.4.20/ide-probe-mod.o
[installer-prep-source 14:48:06 2] £adujê modu³ ide-disk
Using /lib/modules/2.4.20/ide-disk.o
[load_package 14:48:06 2] £adujê parted-pkg
[load_package 14:48:06 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/parted-pkg.tar.gz
[ui-parted2 14:48:25 2] saved part #1, /dev/hda1 on / (8189 MB, reiserfs)
[ui-parted2 14:48:25 2] saved part #2, /dev/hda2 on swap (510 MB, swap)
[installer-prep 14:49:10 2] Setting address 192.168.1.12/24 for eth0
[installer-prep 14:49:10 2] Adding default route via 192.168.1.1 dev eth0
[installer-prep 14:49:10 2] Net device eth0 configured
[installer-prep 14:49:10 2] £adujê reiserfs-pkg
[installer-prep 14:49:10 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/reiserfs-pkg.tar.gz
[installer-prep 14:49:17 2] £adujê reiserfs-mod
[installer-prep 14:49:17 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/reiserfs-mod.tar.gz
[installer-prep 14:49:18 2] £adujê modu³ reiserfs
Using /lib/modules/2.4.20/reiserfs.o
[installer-dest 14:49:18 3] Sprawdzam istniej±ce partycje
[installer-dest 14:49:19 3] Kasujê i tworzê nowe partycje (je¶li potrzeba)
[installer-dest 14:49:19 3] Tworzê systemy plików
[installer-dest 14:49:19 2] Tworzê system plików na partycji /dev/hda
[installer-dest 14:49:19 2] Tworzê system plików na partycji /dev/hda1 (typu reiserfs) [mo¿e to chwilê potrwaæ...]
mkreiserfs 3.6.11 (2003 www.namesys.com)
A pair of credits:
Elena Gryaznova performed testing and benchmarking.
The Defense Advanced Research Projects Agency (DARPA, www.darpa.mil) is the
primary sponsor of Reiser4. DARPA does not endorse this project; it merely
sponsors it.
Format 3.5 with standard journal
Count of blocks on the device: 2096474
Number of blocks consumed by mkreiserfs formatting process: 8275
Blocksize: 4096
Hash function used to sort names: "r5"
Journal Size 8193 blocks (first block 18)
Journal Max transaction length 1024
Initializing journal - 0%....20%....40%....60%....80%....100%
Syncing..ok
Tell your friends to use a kernel based on 2.4.18 or later, and especially not a
kernel based on 2.4.9, when you use reiserFS. Have fun.
ReiserFS is successfully created on /dev/hda1.
[installer-dest 14:49:28 2] Tworzê system plików na partycji /dev/hda2 (typu swap) [mo¿e to chwilê potrwaæ...]
Setting up swapspace version 1, size = 534638592 bytes
[installer-dest 14:49:28 2] Tworzê system plików na partycji /dev/md
[installer-dest 14:49:28 3] Montujê docelowy system plików
[installer-dest 14:49:28 2] Montujê partycjê /dev/hda1 na /dest/ (typ reiserfs)
[installer-dest 14:49:38 2] W³±czam partycjê wymiany (swap) /dev/hda2
[installer-dest 14:49:38 3] Docelowy system plików zosta³ utworzony w katalogu /dest
[load_package 14:49:38 2] £adujê usb-mod
[load_package 14:49:38 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/usb-mod.tar.gz
[load_package 14:49:41 2] £adujê rpm-pkg
[load_package 14:49:41 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/rpm-pkg.tar.gz
[load_package 14:49:43 2] £adujê libc-pkg
[load_package 14:49:43 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/libc-pkg.tar.gz
[installer-pkgs 14:49:57 2] langs = pl:pl_PL, docs = yes
[load_package 14:49:57 2] £adujê poldek-pkg
[load_package 14:49:57 2] ¦ci±gam ftp://ftp.pld-linux.org///dists/2.0/PLD/i686//PLD/inst/2.4-experimental/poldek-pkg.tar.gz
[installer-pkgs 14:50:15 3] Instalujê pakiety RPM
[installer-pkgs 14:51:52 4] INSTALACJA PAKIETÓW NIE POWIOD£A SIÊ!!!
[installer-pkgs 14:51:53 4] Mo¿esz chcieæ zainstalowaæ tylko pakiety podstawowe,
[installer-pkgs 14:51:53 4] a resztê po restarcie.
2004/08/16 14:50:15 Start (poldek --mercy --greedy --mkdir --log=/dest/installer/poldek.log --conf=/tmp/poldekrc --install-dist=/dest -v --pset /etc/installer.pkgs)
2004/08/16 14:50:15 Retrieving ftp://ftp.pld-linux.org/dists/2.0/[...]/packages.dir.mdd...
2004/08/16 14:50:15 Retrieving ftp://ftp.pld-linux.org/dists/2.0/[...]/packages.dir.gz...
2004/08/16 14:51:44 Verifying ftp://ftp.pld-linux.org/dists/2.0/PLD/i686/PLD/RPMS/packages.dir.gz... OK
2004/08/16 14:51:49 Loading ftp://ftp.pld-linux.org/dists/2.0/PLD/i686/PLD/RPMS/packages.dir.gz...
2004/08/16 14:51:51 9132 packages read
2004/08/16 14:51:52 mark FHS-2.3-5
2004/08/16 14:51:52 mark SysVinit-2.85-6
2004/08/16 14:51:52 mark basesystem-1.99-2
2004/08/16 14:51:52 error: mark: bdflush not found
2004/08/16 14:51:52 mark chkconfig-1.2.24h-10
2004/08/16 14:51:52 mark cpio-2.5-2
2004/08/16 14:51:52 mark cracklib-2.7-18
2004/08/16 14:51:52 mark cracklib-dicts-2.7-18
2004/08/16 14:51:52 mark dev-2.9.0-12
2004/08/16 14:51:52 mark findutils-4.1.20-5
2004/08/16 14:51:52 mark fix-info-dir-0.13-6
2004/08/16 14:51:52 mark geninitrd-4413-1
2004/08/16 14:51:52 mark genromfs-0.5.1-3
2004/08/16 14:51:52 mark gettext-0.14.1-2
2004/08/16 14:51:52 mark glibc-2.3.4-0.20040722.2
2004/08/16 14:51:52 mark grep-2.5.1-12
2004/08/16 14:51:52 mark gzip-1.3.5-5
2004/08/16 14:51:52 mark iproute2-2.6.8-3
2004/08/16 14:51:52 mark issue-1.99-2
2004/08/16 14:51:52 mark kbd-1.12-7
2004/08/16 14:51:52 mark kernel-2.6.7-3
2004/08/16 14:51:52 mark lilo-22.5.9-3
2004/08/16 14:51:52 mark login-2.12-12
2004/08/16 14:51:52 mark logrotate-3.7-2
2004/08/16 14:51:52 mark losetup-2.12-12
2004/08/16 14:51:52 mark mawk-1.3.3-30
2004/08/16 14:51:52 mark mingetty-0.9.4-20
2004/08/16 14:51:52 mark mktemp-1.5-15
2004/08/16 14:51:52 mark modutils-2.4.27-5
2004/08/16 14:51:52 mark mount-2.12-12
2004/08/16 14:51:52 mark net-tools-1.60-13
2004/08/16 14:51:52 mark pam-0.77.4-1
2004/08/16 14:51:52 mark pciutils-2.1.11-8
2004/08/16 14:51:52 mark pdksh-5.2.14-41
2004/08/16 14:51:52 mark pldbug-1.4-2
2004/08/16 14:51:52 mark poldek-0.18.6-7
2004/08/16 14:51:52 mark procps-3.2.1-3
2004/08/16 14:51:52 mark rc-boot-1.1-3
2004/08/16 14:51:52 mark rc-scripts-0.4.0.14-1
2004/08/16 14:51:52 mark reiserfsprogs-3.6.16-1
2004/08/16 14:51:52 mark rpm-4.3-0.20040107.28
2004/08/16 14:51:52 mark sed-4.1.1-1
2004/08/16 14:51:52 mark setserial-2.17-11
2004/08/16 14:51:52 mark setup-2.4.6-4
2004/08/16 14:51:52 mark shadow-4.0.4.1-1
2004/08/16 14:51:52 mark syslog-ng-1.6.5-2
2004/08/16 14:51:52 mark tar-1.14-1
2004/08/16 14:51:52 mark utempter-0.5.3-2
2004/08/16 14:51:52 mark util-linux-2.12-12
2004/08/16 14:51:52 mark vim-static-6.3.012-5
2004/08/16 14:51:52 mark which-2.16-2
2004/08/16 14:51:52
Processing dependencies...
2004/08/16 14:51:52 SysVinit-2.85-6 marks coreutils-5.2.1-2
2004/08/16 14:51:52 coreutils-5.2.1-2 marks acl-2.2.23-2
2004/08/16 14:51:52 acl-2.2.23-2 marks attr-2.4.16-2
2004/08/16 14:51:52 coreutils-5.2.1-2 marks libselinux-1.14-1
2004/08/16 14:51:52 chkconfig-1.2.24h-10 marks popt-1.9-0.20030515.5
2004/08/16 14:51:52 fix-info-dir-0.13-6 marks zlib-1.2.1-2
2004/08/16 14:51:52 geninitrd-4413-1 marks busybox-initrd-1.00-0.pre10.4
2004/08/16 14:51:52 geninitrd-4413-1 marks mdadm-initrd-1.6.0-2
2004/08/16 14:51:52 geninitrd-4413-1 marks pci-database-0.6-2
2004/08/16 14:51:52 glibc-2.3.4-0.20040722.2 marks glibc-misc-2.3.4-0.20040722.2
2004/08/16 14:51:52 kbd-1.12-7 marks open-1.4-17
2004/08/16 14:51:52 kernel-2.6.7-3 marks module-init-tools-3.0-1
2004/08/16 14:51:52 logrotate-3.7-2 marks anacron-2.3-22
2004/08/16 14:51:52 anacron-2.3-22 marks courier-0.46-1
2004/08/16 14:51:52 courier-0.46-1 marks cyrus-sasl-2.1.18-2
2004/08/16 14:51:52 cyrus-sasl-2.1.18-2 marks db-4.2.52-6
2004/08/16 14:51:52 cyrus-sasl-2.1.18-2 marks openssl-0.9.7d-5
2004/08/16 14:51:52 courier-0.46-1 marks expect-5.41.0-1
2004/08/16 14:51:52 expect-5.41.0-1 marks tcl-8.4.6-1
2004/08/16 14:51:52 tcl-8.4.6-1 marks ncurses-5.4-2
2004/08/16 14:51:52 tcl-8.4.6-1 marks readline-4.3-11
2004/08/16 14:51:52 courier-0.46-1 marks fam-libs-2.6.10-1.3
2004/08/16 14:51:52 fam-libs-2.6.10-1.3 marks libgcc-3.3.4-3
2004/08/16 14:51:52 fam-libs-2.6.10-1.3 marks libstdc++-3.3.4-3
2004/08/16 14:51:52 courier-0.46-1 marks openldap-libs-2.2.15-1
2004/08/16 14:51:52 courier-0.46-1 marks openssl-tools-0.9.7d-5
2004/08/16 14:51:52 courier-0.46-1 marks perl-base-5.8.5-2
2004/08/16 14:51:52 logrotate-3.7-2 marks mailx-8.1.1-24
2004/08/16 14:51:52 pam-0.77.4-1 marks make-3.80-5
2004/08/16 14:51:52 pldbug-1.4-2 marks dml-0.1.4-2
2004/08/16 14:51:52 dml-0.1.4-2 marks slang-1.4.9-8
2004/08/16 14:51:52 poldek-0.18.6-7 marks bzip2-1.0.2-8
2004/08/16 14:51:52 poldek-0.18.6-7 marks ed-0.2-34
2004/08/16 14:51:52 poldek-0.18.6-7 marks elfutils-libelf-0.95-2
2004/08/16 14:51:52 poldek-0.18.6-7 marks pcre-4.5-2
2004/08/16 14:51:52 poldek-0.18.6-7 marks rpm-lib-4.3-0.20040107.28
2004/08/16 14:51:52 rpm-lib-4.3-0.20040107.28 marks beecrypt-3.1.0-3
2004/08/16 14:51:52 rc-scripts-0.4.0.14-1 marks e2fsprogs-1.35-2
2004/08/16 14:51:52 e2fsprogs-1.35-2 marks libcom_err-1.35-2
2004/08/16 14:51:52 e2fsprogs-1.35-2 marks libuuid-1.35-2
2004/08/16 14:51:52 syslog-ng-1.6.5-2 marks libwrap-7.6-36
2004/08/16 14:51:52 syslog-ng-1.6.5-2 marks psmisc-21.4-1
2004/08/16 14:51:52 error: Buggy package set.
=== EOF /var/log/installer
=================================================================
=== /var/log/messages
=================================================================
=== EOF /var/log/messages
=================================================================
=== `dmesg`
=================================================================
Linux version 2.4.20 (builder at averne) (gcc version 3.3.2 (PLD Linux)) #1 nie lis 30 20:37:54 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fffd000 (usable)
BIOS-e820: 000000000fffd000 - 000000000ffff000 (ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65533
zone(0): 4096 pages.
zone(1): 61437 pages.
zone(2): 0 pages.
Kernel command line: initrd=initrd.gz root=/dev/ram0 init=/bin/init-wrapper BOOT_IMAGE=vmlinuz
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 416.541 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 830.66 BogoMIPS
Memory: 256408k/262132k available (884k kernel code, 5340k reserved, -1128k data, 72k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 416.5306 MHz.
..... host bus clock speed is 83.3059 MHz.
cpu: 0, clocks: 833059, slice: 416529
CPU0<T0:833056,T1:416512,D:15,S:416529,C:833059>
PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 680k freed
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 72k freed
inserting floppy driver for 2.4.20
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PCI: Found IRQ 12 for device 00:09.0
PCI: Sharing IRQ 12 with 00:04.2
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.16
divert: allocating divert_blk for eth0
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120022A, ATA DISK drive
hdc: IDE/ATAPI CD-ROM 44X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
Adding Swap: 522104k swap-space (priority -1)
=== EOF `dmesg`
More information about the pld-devel-pl
mailing list