pci-database

[Andrzej Zawadzki]

havner wrote:
> On Thu, Dec 02, 2004 at 01:20:45PM +0100, Krzysztof Mościcki wrote:
> 
>>Witam.
>>
>>Prosiłbym o dodanie wpisu do pakietu pci-database, pcidev net nic nie
>>pokazuje.
>>
>>lspci -v -s 00:09.0
>>
>>00:09.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter
>>(rev 11)
>>        Subsystem: D-Link System Inc Gigabit Ethernet Adapter
>>        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 169
>>        Memory at ef000000 (32-bit, non-prefetchable) [size=16K]
>>        I/O ports at d000 [size=256]
>>        Expansion ROM at <unassigned> [disabled] [size=128K]
>>        Capabilities: [48] Power Management version 2
>>        Capabilities: [50] Vital Product Data
>>
>>Moduł to: sk98lin
> 
> 
> pciid poprosze
> lspci -n | grep "00:09\.0"
> 

Płyta GA-K8NS Ultra-939

To jeszcze ja:


# pcidev sata
10953512 sata_sil Silicon Image, Inc. (formerly CMD Technology Inc)|SiI 
3512 [SATALink/SATARaid] Serial ATA Controller

a powinny być dwa
Jeden to:

02:0d.0 Unknown mass storage controller: Silicon Image, Inc. (formerly 
CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller 
(rev 01)
         Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) 
SiI 3512 [SATALink/SATARaid] Serial ATA Controller
         Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 17
         I/O ports at 8800 [size=8]
         I/O ports at 8c00 [size=4]
         I/O ports at 9000 [size=8]
         I/O ports at 9400 [size=4]
         I/O ports at 9800 [size=16]
         Memory at fb008000 (32-bit, non-prefetchable) [size=512]
         Expansion ROM at <unassigned> [disabled] [size=512K]
         Capabilities: [60] Power Management version 2

Natomiast:
# pcidev ide
10de00e5 amd74xx nVidia Corporation|
10de00e3 amd74xx nVidia Corporation|

A chyba powinien być jeden (czy się mylę?):


00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev a2) 
(prog-if 8a [Master SecP PriP])
         Subsystem: Giga-byte Technology: Unknown device 5002
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Region 4: I/O ports at f000 [size=16]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev a2) 
(prog-if 85 [Master SecO PriO])
         Subsystem: Giga-byte Technology: Unknown device b002
         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
         Latency: 0 (750ns min, 250ns max)
         Interrupt: pin A routed to IRQ 22
         Region 0: I/O ports at 09f0 [size=8]
         Region 1: I/O ports at 0bf0 [size=4]
         Region 2: I/O ports at 0970 [size=8]
         Region 3: I/O ports at 0b70 [size=4]
         Region 4: I/O ports at d800 [size=16]
         Region 5: I/O ports at dc00 [size=128]
         Capabilities: [44] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Tylko, który to SATA? (moduł jądra do tego to sata_nv)

-- 
Andrzej Zawadzki