Fatal: geo_query_dev HDIO_GETGEO (dev 0xfe00): Inappropriate ioctl for device
Marcin Winkler
qurczak w wolomin.biz
Nie, 27 Sie 2006, 21:37:17 CEST
Dnia Sun, 27 Aug 2006 21:31:31 +0200
Jakub Bogusz <qboosh w pld-linux.org> napisał(a):
> Co za urządzenie jest pod deskryptorem 7? Na tym kawałku nie widać
> open() dla niego.
To jeszcze raz
5189 stat64("/dev/mapper/.", {st_dev=makedev(254, 1), st_ino=83065,
st_mode=S_IFDIR|0755, st_nlink=2, st_uid=0, st_gid=0, st_blksize=4096,
st_blocks=8, st_size=4096, st_atime=2006/08/27-21:33:47,
st_mtime=2006/08/27-21:12:37, st_ctime=2006/08/27-21:12:37}) = 0 5189
stat64("/dev/mapper/..", {st_dev=makedev(254, 1), st_ino=65537,
st_mode=S_IFDIR|0755, st_nlink=23, st_uid=0, st_gid=0, st_blksize=4096,
st_blocks=96, st_size=49152, st_atime=2006/08/27-21:33:46,
st_mtime=2006/08/27-21:12:38, st_ctime=2006/08/27-21:12:38}) = 0 5189
stat64("/dev/mapper/control", {st_dev=makedev(254, 1), st_ino=83064,
st_mode=S_IFCHR|0660, st_nlink=1, st_uid=0, st_gid=6, st_blksize=4096,
st_blocks=0, st_rdev=makedev(10, 63), st_atime=2005/12/16-15:49:47,
st_mtime=2005/12/16-15:49:47, st_ctime=2006/08/27-21:12:37}) = 0 5189
stat64("/dev/mapper/vg-swap", {st_dev=makedev(254, 1), st_ino=81930,
st_mode=S_IFBLK|0600, st_nlink=1, st_uid=0, st_gid=0, st_blksize=4096,
st_blocks=0, st_rdev=makedev(254, 0), st_atime=2006/08/27-21:32:54,
st_mtime=2006/08/27-21:09:04, st_ctime=2006/08/27-21:09:04}) = 0 5189
close(9) = 0 5189
close(8) = 0 5189 open("/dev/mapper/vg-swap",
O_RDONLY) = 8 5189 read(8,
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
5189 close(8) = 0 5189
sync() = 0 5189 open("/dev/mapper/vg-swap",
0x4 /* O_??? */) = 8 5189 open("/dev/hda", O_RDWR) = 9 5189
read(9, "\372", 1) = 1 5189 ioctl(9, 0x301,
0xbfc243a8) = 0 5189 close(9) = 0 5189
open("/dev/hdb", O_RDWR) = -1 ENXIO (No such device or
address) 5189 ioctl(8, 0x301, 0xbfc24488) = -1 ENOTTY
(Inappropriate ioctl for device) 5189 write(1, "Fatal: geo_query_dev
HDIO_GETGEO"..., 78) = 78 5189 sync() = 0
5189 close(4) = 0 5189 munmap(0xb7f12000,
4096) = 0 5189 exit_group(1) = ?
Wygląda ze deskryptor nie odczepia sie od /dev/vg/swap ?
> Ewentualnie grep 254 /proc/devices.
-bash-3.1# grep 254 /proc/devices
254 device-mapper
A partycje to:
/dev/mapper/vg-root_backup
1008M 525M 484M 53% /
/dev/hda1 99M 7,0M 92M 8% /boot
--
"Nieobecni nie mają racji"
Marcin Winkler
Więcej informacji o liście dyskusyjnej pld-devel-pl