iplus Huawei E630
Michał Lisowski
lisu87 w gmail.com
Wto, 25 Gru 2007, 18:50:06 CET
Paweł Zuzelski pisze:
> On Saturday 22 December 2007 20:58:46 Michał Lisowski wrote:
>
>> OK, ale ja i tak nic nie zdzialam, bo nie widze zadnego /dev/ttyUSB* :(
>>
>
> A możesz pokazać wynik komend lsusb, lsmod i dmesg (około minuty po włożeniu
> karty)?
>
>
ogolnie to w /dev/tts mam pliki USB{0,2,3} kiedy dawalem pppd call iplus
to pojawialo sie USB1 jeszcze, ale skrypt i tak sie nie powiodl.
po wlozeniu karty i odczekaniu ok. minuty dostaje:
#dmesg
...
usbcore: registered new interface driver usbserial
USB driver usbserial lacks resume support.
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
USB driver usbserial_generic lacks resume support.
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
USB driver pl2303 lacks resume support.
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.0 to 64
ohci_hcd 0000:07:00.0: OHCI Host Controller
ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:07:00.0: irq 20, io mem 0x34000000
Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.1 to 64
ohci_hcd 0000:07:00.1: OHCI Host Controller
ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:07:00.1: irq 20, io mem 0x34001000
Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
usb 4-1: new full speed USB device using ohci_hcd and address 2
Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
usb 4-1: configuration #1 chosen from 1 choice
pl2303 4-1:1.0: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB0
Device driver ttyUSB0 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep82 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep02 lacks bus and class support for being resumed.
pl2303 4-1:1.1: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB1
Device driver ttyUSB1 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep84 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep04 lacks bus and class support for being resumed.
pl2303 4-1:1.2: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB2
Device driver ttyUSB2 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep85 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep05 lacks bus and class support for being resumed.
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
USB driver option lacks resume support.
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
PPP generic driver version 2.4.2
usb 4-1: USB disconnect, address 2
pl2303 4-1:1.0: device disconnected
pl2303 ttyUSB1: pl2303 converter now disconnected from ttyUSB1
pl2303 4-1:1.1: device disconnected
pl2303 ttyUSB2: pl2303 converter now disconnected from ttyUSB2
pl2303 4-1:1.2: device disconnected
usb 4-1: new full speed USB device using ohci_hcd and address 3
Device driver usbdev4.3_ep00 lacks bus and class support for being resumed.
usb 4-1: configuration #1 chosen from 1 choice
pl2303 4-1:1.0: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
Device driver ttyUSB1 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep81 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep82 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep02 lacks bus and class support for being resumed.
pl2303 4-1:1.1: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2
Device driver ttyUSB2 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep84 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep04 lacks bus and class support for being resumed.
pl2303 4-1:1.2: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB3
Device driver ttyUSB3 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep85 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep05 lacks bus and class support for being resumed.
pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
ohci_hcd 0000:07:00.0: HC died; cleaning up
ohci_hcd 0000:07:00.1: HC died; cleaning up
pccard: card ejected from slot 0
usb 4-1: USB disconnect, address 3
ohci_hcd 0000:07:00.0: leak ed ffff81001942b050 (#81) state 0 (has tds)
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
pl2303 4-1:1.0: device disconnected
option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
pl2303 4-1:1.1: device disconnected
option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
pl2303 4-1:1.2: device disconnected
ohci_hcd 0000:07:00.0: remove, state 0
usb usb4: USB disconnect, address 1
ohci_hcd 0000:07:00.0: dma_pool_destroy ohci_ed, ffff81001942b000 busy
ohci_hcd 0000:07:00.0: USB bus 4 deregistered
ACPI: PCI interrupt for device 0000:07:00.0 disabled
ohci_hcd 0000:07:00.1: remove, state 0
usb usb5: USB disconnect, address 1
ohci_hcd 0000:07:00.1: USB bus 5 deregistered
ACPI: PCI interrupt for device 0000:07:00.1 disabled
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.0 to 64
ohci_hcd 0000:07:00.0: OHCI Host Controller
ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:07:00.0: irq 20, io mem 0x34000000
Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.1 to 64
ohci_hcd 0000:07:00.1: OHCI Host Controller
ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:07:00.1: irq 20, io mem 0x34001000
Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
usb 4-1: new full speed USB device using ohci_hcd and address 2
Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
usb 4-1: configuration #1 chosen from 1 choice
pl2303 4-1:1.0: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
Device driver ttyUSB0 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep82 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep02 lacks bus and class support for being resumed.
pl2303 4-1:1.1: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
Device driver ttyUSB1 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep84 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep04 lacks bus and class support for being resumed.
pl2303 4-1:1.2: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2
Device driver ttyUSB2 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep85 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep05 lacks bus and class support for being resumed.
usb 4-1: USB disconnect, address 2
pl2303 4-1:1.0: device disconnected
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
pl2303 4-1:1.1: device disconnected
option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
pl2303 4-1:1.2: device disconnected
usb 4-1: new full speed USB device using ohci_hcd and address 3
Device driver usbdev4.3_ep00 lacks bus and class support for being resumed.
usb 4-1: configuration #1 chosen from 1 choice
pl2303 4-1:1.0: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
Device driver ttyUSB1 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep81 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep82 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep02 lacks bus and class support for being resumed.
pl2303 4-1:1.1: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2
Device driver ttyUSB2 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep84 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep04 lacks bus and class support for being resumed.
pl2303 4-1:1.2: GSM modem (1-port) converter detected
usb 4-1: GSM modem (1-port) converter now attached to ttyUSB3
Device driver ttyUSB3 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep85 lacks bus and class support for being resumed.
Device driver usbdev4.3_ep05 lacks bus and class support for being resumed.
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
#lsmod
odule Size Used by
ppp_generic 29088 0
slhc 8064 1 ppp_generic
option 12416 0
pl2303 23172 0
snd_pcm_oss 46112 0
snd_mixer_oss 18304 1 snd_pcm_oss
usbserial 36336 2 option,pl2303
8139cp 23808 0
pcmcia 31368 0
firmware_class 11008 1 pcmcia
rtc_cmos 10040 0
rtc_core 18188 1 rtc_cmos
rtc_lib 4992 1 rtc_core
k8temp 7424 0
8139too 28288 0
hwmon 4872 1 k8temp
mii 7168 2 8139cp,8139too
ide_cd 41504 0
cdrom 39848 1 ide_cd
psmouse 44316 0
serio_raw 8324 0
snd_hda_intel 323360 0
snd_pcm 83848 2 snd_pcm_oss,snd_hda_intel
snd_timer 23816 1 snd_pcm
snd 58216 5 snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
soundcore 9120 1 snd
yenta_socket 27404 2
rsrc_nonstatic 12800 1 yenta_socket
sdhci 18828 0
mmc_core 29320 1 sdhci
snd_page_alloc 10768 2 snd_hda_intel,snd_pcm
i2c_piix4 10764 0
pcmcia_core 38436 3 pcmcia,yenta_socket,rsrc_nonstatic
ohci_hcd 23172 0
i2c_core 24832 1 i2c_piix4
ehci_hcd 36748 0
usbcore 139440 6 option,pl2303,usbserial,ohci_hcd,ehci_hcd
shpchp 34844 0
pci_hotplug 32516 1 shpchp
evdev 11648 0
tsdev 9728 0
ext3 136336 1
mbcache 10120 1 ext3
jbd 61680 1 ext3
ide_disk 17408 3
atiixp 7696 0 [permanent]
ide_core 143528 3 ide_cd,ide_disk,atiixp
#lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Więcej informacji o liście dyskusyjnej pld-devel-pl