[2.6.20/smp/fglrx] oops w firegl_unbind_pcie...
Paweł Sikora
pluto at agmk.net
Wed Jan 31 14:17:08 CET 2007
jajeczko ladnie wstaje, modul sie laduje, przy starcie xorg-7.1/7.2
jest juz grzybnia w zalaczniku, a w gugle nic ciekawego :/
z drugiej strony na na sterowniku radeon, lub vesa aktualny
xserver (7.2) tez nie wstaje.
Backtrace:
0: /usr/bin/Xwrapper(xf86SigHandler+0x6d) [0x488d9d]
1: /lib64/libc.so.6 [0x2b59d6a681c0]
2: /usr/bin/Xwrapper(NumMotionEvents+0x12) [0x43e742]
3: /usr/bin/Xwrapper(CreateConnectionBlock+0x47) [0x4304e7]
4: /usr/bin/Xwrapper(main+0x61f) [0x430f6f]
5: /lib64/libc.so.6(__libc_start_main+0xf4) [0x2b59d6a55af4]
6: /usr/bin/Xwrapper(FontFileCompleteXLFD+0x239) [0x430129]
Fatal server error:
Caught signal 11. Server aborting
ma ktos szklana kule?
-------------- next part --------------
--- xorg-driver-video-fglrx-8.33.6/common/lib/modules/fglrx/build_mod/firegl_public.c.orig 2007-01-09 12:26:33.000000000 +0100
+++ xorg-driver-video-fglrx-8.33.6/common/lib/modules/fglrx/build_mod/firegl_public.c 2007-01-31 02:06:52.539021699 +0100
@@ -194,6 +194,70 @@
int errno;
#endif // __ia64__
+#if defined(__i386__)
+#define __syscall_return(type, res) \
+do { \
+ if ((unsigned long)(res) >= (unsigned long)(-(128 + 1))) { \
+ errno = -(res); \
+ res = -1; \
+ } \
+ return (type) (res); \
+} while (0)
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+__asm__ volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" \
+ : "=a" (__res) \
+ : "0" (__NR_##name),"ri" ((long)(arg1)),"c" ((long)(arg2)) \
+ : "memory"); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+__asm__ volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" \
+ : "=a" (__res) \
+ : "0" (__NR_##name),"ri" ((long)(arg1)),"c" ((long)(arg2)), \
+ "d" ((long)(arg3)) : "memory"); \
+__syscall_return(type,__res); \
+}
+#elif defined(__x86_64__)
+#define __syscall_clobber "r11","rcx","memory"
+#define __syscall "syscall"
+
+#define __syscall_return(type, res) \
+do { \
+ if ((unsigned long)(res) >= (unsigned long)(-127)) { \
+ errno = -(res); \
+ res = -1; \
+ } \
+ return (type) (res); \
+} while (0)
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+ : "=a" (__res) \
+ : "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)) : __syscall_clobber ); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+__asm__ volatile (__syscall \
+ : "=a" (__res) \
+ : "0" (__NR_##name),"D" ((long)(arg1)),"S" ((long)(arg2)), \
+ "d" ((long)(arg3)) : __syscall_clobber); \
+__syscall_return(type,__res); \
+}
+#endif
+
// int mlock(const void *addr, size_t len);
_syscall2(int, mlock, const void *, addr, size_t, len )
// int munlock(const void *addr, size_t len);
-------------- next part --------------
Linux version 2.6.20-0.rc6.0.1smp (pluto at vmx) (gcc version 4.2.0 20070126 (prerelease) (PLD-Linux)) #1 SMP Tue Jan 30 23:41:36 UTC 2007
Command line: root=/dev/md1 vga=ext
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f8290
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff92c0
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000003fff9400
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9500
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9200
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-40000000
Entering add_active_range(0, 0, 159) 1 entries of 3200 used
Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003fff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 262128
On node 0 totalpages: 262031
DMA zone: 88 pages used for memmap
DMA zone: 2200 pages reserved
DMA zone: 1711 pages, LIFO batch:0
DMA32 zone: 5543 pages used for memmap
DMA32 zone: 252489 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 41728 bytes of per cpu data
Built 1 zonelists. Total pages: 254200
Kernel command line: root=/dev/md1 vga=ext
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x50
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1584 kB
per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ 210000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1014136k/1048512k available (2318k kernel code, 33988k reserved, 1202k data, 312k init)
Calibrating delay using timer specific routine.. 4423.26 BogoMIPS (lpj=8846539)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
lockdep: not fixing up alternatives.
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12557932
Detected 12.557 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2210.196 MHz processor.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fde00000-fdefffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: fd900000-fd9fffff
PREFETCH window: fd800000-fd8fffff
PCI: Bridge: 0000:00:0e.0
IO window: 6000-6fff
MEM window: fd700000-fd7fffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 65536 (order: 9, 3670016 bytes)
TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 904k freed
audit: initializing netlink socket (disabled)
audit(1172802322.476:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Suspend v2.2.9.3
Suspend2 Userspace Storage Manager support registered.
Suspend2 Userspace UI support registered.
Suspend2 Compressor support registered.
Suspend2 Encryptor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:07.0: version 3.2
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xFFFFC20000006480 ctl 0xFFFFC200000064A0 bmdma 0xCC00 irq 23
ata2: SATA max UDMA/133 cmd 0xFFFFC20000006580 ctl 0xFFFFC200000065A0 bmdma 0xCC08 irq 23
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 321672960 sectors: LBA48 NCQ (depth 1)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600YD-01N 10.0 PQ: 0 ANSI: 5
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xFFFFC20000010480 ctl 0xFFFFC200000104A0 bmdma 0xB800 irq 22
ata4: SATA max UDMA/133 cmd 0xFFFFC20000010580 ctl 0xFFFFC200000105A0 bmdma 0xB808 irq 22
scsi2 : sata_nv
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 321672960 sectors: LBA48 NCQ (depth 1)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD1600YD-01N 10.0 PQ: 0 ANSI: 5
ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
md: raid0 personality registered for level 0
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: Attached scsi disk sdb
md: md1 stopped.
md: bind<sda3>
md: bind<sdb3>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb3
raid0: comparing sdb3(107426560) with sdb3(107426560)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda3
raid0: comparing sda3(107426560) with sdb3(107426560)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 214853120 blocks.
raid0 : conf->hash_spacing is 214853120 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
Suspend2: Initrd lacks echo > /sys/power/suspend2/do_resume.
Filesystem "md1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 312k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
wlan: 0.8.4.2 (svn r1931)
ath_rate_sample: 1.2 (svn r1931)
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
ath_pci: 0.9.4.5 (svn r1931)
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PC Speaker as /class/input/input0
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01695:1010 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
i2c_adapter i2c-0: nForce2 SMBus adapter at 0xf800
i2c_adapter i2c-1: nForce2 SMBus adapter at 0xf400
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfdef0000, irq=18
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
usb 1-1: new low speed USB device using ohci_hcd and address 2
intel8x0_measure_ac97_clock: measured 58568 usecs
intel8x0: clocking to 46984
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new low speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech HID compliant keyboard as /class/input/input1
usbcore: registered new interface driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new interface driver hiddev
input: Logitech HID compliant keyboard as /class/input/input2
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-1
input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Adding 1172736k swap on /dev/sda2. Priority:1 extents:1 across:1172736k
Adding 1172736k swap on /dev/sdb2. Priority:1 extents:1 across:1172736k
Filesystem "md1": Disabling barriers, not supported by the underlying device
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
ACPI: Thermal Zone [THRM] (50 C)
i2c /dev entries driver
md: md0 stopped.
md: bind<sda1>
md: bind<sdb1>
md: raid1 personality registered for level 1
raid1: raid set md0 active with 2 out of 2 mirrors
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
wan0: no IPv6 routers present
ath0: no IPv6 routers present
[fglrx] Maximum main memory to use for locked dma buffers: 909 MBytes.
[fglrx] module loaded - fglrx 8.33.6 [Jan 8 2007] on minor 0
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 134086656
[fglrx] free LFB = 110088192
[fglrx] max single LFB = 110088192
[fglrx] total Inv = 134217728
[fglrx] free Inv = 134217728
[fglrx] max single Inv = 134217728
[fglrx] total TIM = 0
general protection fault: 0000 [1] SMP
CPU 0
Modules linked in: fglrx(P) wlan_ccmp binfmt_misc wlan_tkip wlan_xauth ipt_MASQUERADE iptable_nat nf_nat xt_tcpudp xt_conntrack nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink iptable_filter ip_tables ip6table_filter ip6_tables x_tables ipv6 ext2 mbcache raid1 eeprom i2c_dev thermal powernow_k8 freq_table processor evdev msr cpuid usbmouse usbhid hid ff_memless usbkbd wlan_scan_ap snd_intel8x0 psmouse serio_raw snd_ac97_codec ac97_bus pcspkr ide_cd cdrom i2c_nforce2 ath_pci forcedeth snd_pcm ath_rate_sample wlan k8temp hwmon ehci_hcd i2c_core snd_timer ath_hal(P) snd ohci_hcd soundcore snd_page_alloc usbcore sd_mod raid0 md_mod xfs sata_nv libata scsi_mod amd74xx ide_core
Pid: 19373, comm: Xorg Tainted: P 2.6.20-0.rc6.0.1smp #1
RIP: 0010:[<ffffffff88404536>] [<ffffffff88404536>] :fglrx:firegl_unbind_pcie+0x1b6/0x210
RSP: 0018:ffff810027523bc8 EFLAGS: 00210202
RAX: 0000000000000000 RBX: 0000000000000740 RCX: 0000000000000000
RDX: ffff810026601668 RSI: ffff8100272985b8 RDI: ffff8100339b4e88
RBP: ffff810029bd8000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff883f23cd R11: 0000000000000000 R12: ffffffff884800c0
R13: ffff810023f20bd8 R14: 6b6b6b6b6b6b6b6b R15: ffffc20010260000
FS: 00002b650d3b4b00(0000) GS:ffffffff80571000(0000) knlGS:00000000f7ea16c0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000007f2828 CR3: 0000000000201000 CR4: 00000000000006e0
Process Xorg (pid: 19373, threadinfo ffff810027522000, task ffff8100041ee100)
Stack: 0000000000000008 0000000000000740 0000000000000100 ffff8100272985b8
ffffffff884800c0 ffff8100291852a8 0000000000000001 ffffffff884800c0
ffff810023f20bd8 ffff81003d77bc48 ffff810038940c60 ffffffff883fea3e
Call Trace:
[<ffffffff883fea3e>] :fglrx:firegl_free_buffer_queue+0x12e/0x270
[<ffffffff883fb9c8>] :fglrx:firegl_takedown+0xa8/0xc00
[<ffffffff883fb03c>] :fglrx:firegl_release+0x8c/0x150
[<ffffffff883fb0b4>] :fglrx:firegl_release+0x104/0x150
[<ffffffff80212d72>] __fput+0xc2/0x1c0
[<ffffffff802263d1>] filp_close+0x71/0x90
[<ffffffff8023bfd6>] put_files_struct+0x66/0xc0
[<ffffffff80215dd2>] do_exit+0x2b2/0x8e0
[<ffffffff8024e5d2>] do_group_exit+0xb2/0xc0
[<ffffffff8022e067>] get_signal_to_deliver+0x4d7/0x510
[<ffffffff802651a7>] sysret_signal+0x1c/0x27
[<ffffffff80261dc0>] do_notify_resume+0xd0/0x7f0
[<ffffffff8024bfbe>] try_to_wake_up+0x44e/0x470
[<ffffffff8029dd9c>] __sigqueue_alloc+0x3c/0x80
[<ffffffff8026cdbf>] _spin_unlock_irq+0x1f/0x30
[<ffffffff8021f4f7>] sigprocmask+0xf7/0x110
[<ffffffff80233363>] sys_rt_sigprocmask+0x63/0x120
[<ffffffff8026cdbf>] _spin_unlock_irq+0x1f/0x30
[<ffffffff8021f4f7>] sigprocmask+0xf7/0x110
[<ffffffff802651a7>] sysret_signal+0x1c/0x27
[<ffffffff80265437>] ptregscall_common+0x67/0xb0
Code: 41 c6 46 38 00 48 83 c4 28 31 c0 5b 5d 41 5c 41 5d 41 5e 41
RIP [<ffffffff88404536>] :fglrx:firegl_unbind_pcie+0x1b6/0x210
RSP <ffff810027523bc8>
<1>Fixing recursive fault but reboot is needed!
More information about the pld-devel-pl
mailing list