Problemy ze zbudowaniem Virtualboksa

[alteriks]

Chciałem, zbudować sobie Virtualbox.spec ale mam problem ponieważ używam  
jajka 2.6.22.6_laptop z nałożoną łatką  
linux-phc-0.3.1-kernel-vanilla-2.6.22_sc.patch, która umożliwia obniżanie  
napięcia na procesorach Pentium M. Ale w tym patchu czegoś brakuje  
(aplikuje się czysto) bo przy budowaniu Virtualbox.spec w momencie  
tworzenia modułów wyskakuje:

+ install -d o/include/linux
+ ln -sf /usr/src/linux/config-dist o/.config
+ ln -sf /usr/src/linux/Module.symvers-dist o/Module.symvers
+ ln -sf /usr/src/linux/include/linux/autoconf-dist.h  
o/include/linux/autoconf.h
+ ln -sf /usr/src/linux/include/asm-i386 o/include/asm
+ set +x
+ /usr/bin/make -j1 -C /usr/src/linux prepare scripts  
HOSTCC=i686-pld-linux-gcc SYSSRC=/usr/src/linux  
SYSOUT=/home/alteriks/rpm/BUILD/VirtualBox-1.5.0_OSE/PLD-MODULE-BUILD/vboxadd/o  
O=/home/alteriks/rpm/BUILD/VirtualBox-1.5.0_OSE/PLD-MODULE-BUILD/vboxadd/o  
CC=i686-pld-linux-gcc CPP=i686-pld-linux-gcc -E
make: Entering directory `/usr/src/linux-2.6.22.6_laptop'
   HOSTCC  scripts/basic/fixdep
   HOSTCC  scripts/basic/docproc
   GEN      
/home/alteriks/rpm/BUILD/VirtualBox-1.5.0_OSE/PLD-MODULE-BUILD/vboxadd/o/Makefile
   HOSTCC  scripts/kconfig/conf.o
   HOSTCC  scripts/kconfig/kxgettext.o
   HOSTCC  scripts/kconfig/zconf.tab.o
   HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf -s arch/i386/Kconfig
.config:334:warning: trying to assign nonexistent symbol  
X86_SPEEDSTEP_CENTRINO_TABLE

potem wyskakuje:
*
* Restart config...
*
*
* CPU Frequency scaling
*
CPU Frequency scaling (CPU_FREQ) [Y/n/?] y
   Enable CPUfreq debugging (CPU_FREQ_DEBUG) [N/y/?] n
   CPU frequency translation statistics (CPU_FREQ_STAT) [M/n/y/?] m
     CPU frequency translation statistics details (CPU_FREQ_STAT_DETAILS)  
[Y/n/?] y
   Default CPUFreq governor
   > 1. performance (CPU_FREQ_DEFAULT_GOV_PERFORMANCE)
     2. userspace (CPU_FREQ_DEFAULT_GOV_USERSPACE)
   choice[1-2?]: 1
   'performance' governor (CPU_FREQ_GOV_PERFORMANCE) [Y/?] y
   'powersave' governor (CPU_FREQ_GOV_POWERSAVE) [M/n/y/?] m
   'userspace' governor for userspace frequency scaling  
(CPU_FREQ_GOV_USERSPACE) [M/n/y/?] m
   'ondemand' cpufreq policy governor (CPU_FREQ_GOV_ONDEMAND) [M/n/y/?] m
   'conservative' cpufreq governor (CPU_FREQ_GOV_CONSERVATIVE) [M/n/y/?] m
   *
   * CPUFreq processor drivers
   *
   ACPI Processor P-States driver (X86_ACPI_CPUFREQ) [M/n/?] m
   AMD Mobile K6-2/K6-3 PowerNow! (X86_POWERNOW_K6) [M/n/y/?] m
   AMD Mobile Athlon/Duron PowerNow! (X86_POWERNOW_K7) [M/n/y/?] m
   AMD Opteron/Athlon64 PowerNow! (X86_POWERNOW_K8) [M/n/y/?] m
   Cyrix MediaGX/NatSemi Geode Suspend Modulation (X86_GX_SUSPMOD)  
[M/n/y/?] m
   Intel Enhanced SpeedStep (X86_SPEEDSTEP_CENTRINO) [M/n/y/?] m
     Userspace control of CPU frequency/voltage table  
(X86_SPEEDSTEP_CENTRINO_SYSFS) [Y/n/?] (NEW) n
     Userspace control of CPU frequency/voltage table  
(X86_SPEEDSTEP_CENTRINO_SYSFS) [Y/n/?] (NEW) n
     Use ACPI tables to decode valid frequency/voltage pairs (deprecated)  
(X86_SPEEDSTEP_CENTRINO_ACPI) [Y/n/?] y
     Built-in tables (X86_SPEEDSTEP_CENTRINO_BUILTIN) [Y/n/?] (NEW) n
   Intel Speedstep on ICH-M chipsets (ioport interface) (X86_SPEEDSTEP_ICH)  
[M/n/y/?] m
   Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)  
(X86_SPEEDSTEP_SMI) [M/n/y/?] m
   Intel Pentium 4 clock modulation (X86_P4_CLOCKMOD) [M/n/y/?] m
   nVidia nForce2 FSB changing (X86_CPUFREQ_NFORCE2) [M/n/y/?] m
   Transmeta LongRun (X86_LONGRUN) [M/n/y/?] m
   VIA Cyrix III Longhaul (X86_LONGHAUL) [M/n/?] m
   VIA C7 Enhanced PowerSaver (EXPERIMENTAL) (X86_E_POWERSAVER) [M/n/y/?] m
   *
   * shared options
   *
   /proc/acpi/processor/../performance interface (deprecated)  
(X86_ACPI_CPUFREQ_PROC_INTF) [Y/n/?] y
   Relaxed speedstep capability checks (X86_SPEEDSTEP_RELAXED_CAP_CHECK)  
[Y/n/?] y
#
# configuration written to .config
#

i builder kończy działanie... co należałoby zrobić żeby pozbyć się tego  
błędu?