2.6.31.6-2 bez udev + bnx2

[Arkadiusz Patyk]

Witam

#uname -a

Linux zgred 2.6.31.6-2 #1 SMP Mon Nov 16 15:47:42 CET 2009 x86_64

Intel(R)_Xeon(R)_CPU____________5130__ w _2.00GHz PLD Linux

#pcidev net
14e4164c bnx2 Broadcom Corporation|NetXtreme II BCM5708 Gigabit
Ethernet
14e4164c bnx2 Broadcom Corporation|NetXtreme II BCM5708 Gigabit
Ethernet
8086105e e1000e Intel Corporation|82571EB Gigabit Ethernet Controller
8086105e e1000e Intel Corporation|82571EB Gigabit Ethernet Controller

# cat /etc/modprobe.d/modprobe.conf
alias eth0 e1000e
alias eth1 e1000e
alias eth2 bnx2
alias eth3 bnx2

 w dmesg mam:

[ 1496.533225] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v2.0.1
(May 6, 2009)
[ 1496.533248] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1496.933203] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 1496.952158] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw
[ 1496.955895] bnx2: Firmware file "bnx2/bnx2-rv2p-06-4.6.16.fw" is
invalid
[ 1496.955914] bnx2 0000:05:00.0: PCI INT A disabled
[ 1496.955937] bnx2: probe of 0000:05:00.0 failed with error -22
[ 1496.956078] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1497.356533] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 1497.360963] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw
[ 1497.364303] bnx2: Firmware file "bnx2/bnx2-rv2p-06-4.6.16.fw" is
invalid
[ 1497.364367] bnx2 0000:09:00.0: PCI INT A disabled
[ 1497.364388] bnx2: probe of 0000:09:00.0 failed with error -22
Po kilkukrotym wyładowaniu modułu i załadowaniu karta się pojawia:
[ 1948.598836] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v2.0.1
(May 6, 2009)
[ 1948.598855] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1948.996486] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 1949.000768] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw
[ 1949.004136] bnx2: Firmware file "bnx2/bnx2-rv2p-06-4.6.16.fw" is
invalid
[ 1949.004153] bnx2 0000:05:00.0: PCI INT A disabled
[ 1949.004176] bnx2: probe of 0000:05:00.0 failed with error -22
[ 1949.004711] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1949.406485] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 1949.410098] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw

[ 1949.413695] firmware 0000:09:00.0: firmware_loading_store:
unexpected value (0)
[ 1949.414702] eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2)
PCI-X
64-bit 133MHz found at mem f4000000, IRQ 16, node addr
00:15:c5:f2:d9:c5


 Z tym że tylko jedna a to podwójna jest.

Po kolejnych kilku próbach rmmod/modprobe jest już wszystko :/
[ 2037.634829] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v2.0.1
(May 6, 2009)
[ 2037.634853] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2038.033144] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 2038.036685] bnx2 0000:05:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw
[ 2038.040187] firmware 0000:05:00.0: firmware_loading_store:
unexpected
value (0)
[ 2038.041209] eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2)
PCI-X
64-bit 133MHz found at mem f8000000, IRQ 16, node addr
00:15:c5:f2:d9:c3
[ 2038.041276] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2038.443143] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-mips-06-4.6.16.fw
[ 2038.446789] bnx2 0000:09:00.0: firmware: requesting
bnx2/bnx2-rv2p-06-4.6.16.fw
[ 2038.451146] eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2)
PCI-X
64-bit 133MHz found at mem f4000000, IRQ 16, node addr
00:15:c5:f2:d9:c5


/lib/firmware/firmware-loader.sh - z trunk z SVN

rc-scripts-0.4.2.6-3.x86_64


Any idea ?

-- 
Arkadiusz Patyk [areq<>pld-linux:org] [http://rescuecd.pld-linux.org/]
[IRC:areq GG:1383 jid:arek<>patyk:net]