Via VT6102 Rhine

[=?X-UNKNOWN?Q?Tomasz_Gibzi=F1ski?=]

> > do /etc/modules.conf dodales tylko
> > alias eth0  via-rhine
> tak
> 
> > czy jakies dodatkowe parametry??
> nie :)
> 
lsmod|grep rhine
via-rhine              13744   1  (autoclean)
mii                     2464   0  (autoclean) [via-rhine]lsmod

ip addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: imq0: <NOARP> mtu 1500 qdisc noop qlen 30
    link/[65535]
3: imq1: <NOARP> mtu 1500 qdisc noop qlen 30
    link/[65535]
4: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 
100
link/ether 00:30:1b:20:f4:f5 brd ff:ff:ff:ff:ff:ff
    inet 10.158.1.3/24 brd 10.158.1.255 scope global eth0

ip ro
10.158.1.0/24 dev eth0  proto kernel  scope link  src 10.158.1.3
default via 10.158.1.1 dev eth0

tcpdump -i eth0 -n
tcpdump: listening on eth0
nic a po dziesiecu minutach tylko to
11:40:22.906630 10.158.1.3.1024 > 255.255.255.255.7741: udp 16 (DF)

grrr cos 2.4 nie lubi mojej plyty :(

gito