SCSI na plycie SE7501BR2

[Roman Kolasiewicz]

Witam,

Wednesday, December 3, 2003, 8:15:09 AM, Artur Flinta wrote:

> Użytkownik Roman Kolasiewicz napisał:

>>Witam,
>>
>>Udalo sie moze komus odpalic SCSI na tej plycie?
>>
>>  
>>
> Nie mam teraz tej płyty pod ręką, ale moduł aic79xx nie działa?
Ni cholery:

[root w pldmachine /root]# lsmod
Module                  Size  Used by    Not tainted
ipv6                  183576  -1  (autoclean)
eepro100               20084   1
mii                     2464   0  [eepro100]
unix                   17132   5  (autoclean)
ext2                   51016   2
ide-disk               16428   3
ide-core               95608   3  [ide-disk]

[root w pldmachine /root]# lspci
00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
00:00.1 Class ff00: Intel Corp. E7000 Series Host RASUM Controller (rev 01)
00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge (rev 01)
00:03.1 Class ff00: Intel Corp. E7000 Series Hub Interface C RASUM Controller (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
01:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
01:04.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
03:03.0 RAID bus controller: Adaptec AIC-7901A U320 w/HostRAID (rev 03)

[root w pldmachine /root]# modprobe aic79xx
Note: /etc/modules.conf is more recent than /lib/modules/2.4.21/modules.dep
/lib/modules/2.4.21-1.6smp/kernel/drivers/scsi/aic7xxx/aic79xx.o: init_module:
      No such device
Hint: insmod errors can be caused by incorrect module parameters, including
      invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-1.6smp/kernel/drivers/scsi/aic7xxx/aic79xx.o: insmod
      /lib/modules/2.4.21-1.6smp/kernel/drivers/scsi/aic7xxx/aic79xx.o failed
/lib/modules/2.4.21-1.6smp/kernel/drivers/scsi/aic7xxx/aic79xx.o: insmod
      aic79xx failed

[root w pldmachine /root]# uname -a
Linux pldmachine 2.4.21 #1 SMP Tue Aug 19 05:50:59 UTC 2003 i686
      Intel(R)_Xeon(TM)_CPU_2.00GHz unknown PLD Linux

[root w pldmachine /root]# rpm -q kernel-smp
kernel-smp-2.4.21-1.6
[root w pldmachine /root]# cat /etc/pld-release
1.99 PLD Linux (Ac)
[root w pldmachine /root]# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.00GHz
stepping        : 7
cpu MHz         : 1993.633
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
       cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 3971.48

Caly system to AC. Probowalem rowniez czystego kernela 2.4.23 z
ftp.kernel.org kompilowanego _z_ i _bez_ SMP z obsluga tego kontrolera
ale za kazdym razem nie da sie zaladowac tego modulu i z obslugi SCSI
dupa.

Aha dane z BIOS'u:
BIOS Version SBR20.86B.0047.P04
BMC Device ID: 20
BMC Firmware Revision: 0114
BMC Device REvision: 01
PIA Revision: 0136
SDR Revision: 5.5.D

W tej chwili na plycie jest tylko 1 procek, nie dziala mi zarowno w
wersji z wlaczonym, jak i wylaczonym HT.

-- 
Best regards,
 Roman