[Neostrada] Zawieszki połaczenia...

[PLD User]

w   /var/log/ppp    bardzo duuuuzo takich wpisów: połączenie wisi
oczywiscie... kiedys jak nikt nie zresetował z buta to wyszło tego całe
dostępne miejsce na dysku tak ze dysk na full był wypchany dwoma logami.

Dec 15 13:51:41 white2 pppd[1065]: Connect time 20.0 minutes.
Dec 15 13:51:41 white2 pppd[1065]: Sent 943472 bytes, received 13354713
bytes.
Dec 15 13:51:41 white2 pppd[1065]: Using interface ppp0
Dec 15 13:51:41 white2 pppd[1065]: Connect: ppp0 <--> /dev/pts/2
Dec 15 13:51:41 white2 pppd[1065]: Modem hangup
Dec 15 13:51:41 white2 pppd[1065]: Connection terminated.
Dec 15 13:51:41 white2 pppd[1065]: Connect time 20.0 minutes.
Dec 15 13:51:41 white2 pppd[1065]: Sent 943472 bytes, received 13354713
bytes.
Dec 15 13:51:41 white2 pppd[1065]: Using interface ppp0
Dec 15 13:51:41 white2 pppd[1065]: Connect: ppp0 <--> /dev/pts/2
Dec 15 13:51:41 white2 pppd[1065]: Modem hangup
Dec 15 13:51:41 white2 pppd[1065]: Connection terminated.
Dec 15 13:51:41 white2 pppd[1065]: Connect time 20.0 minutes.
Dec 15 13:51:41 white2 pppd[1065]: Sent 943472 bytes, received 13354713
bytes.
-----------------------------------------------------------

neostrade odpalam plikiem neo w którym jest:
   modem_tun -m -f /firmware.bin
   pppd call adsl

config to:

  lock
  noipdefault
  defaultroute
  pty "/usr/local/sbin/pppoa2 -vpi 0 -vci 35"
  asyncmap 0
  lcp-echo-interval 60
  lcp-echo-failure 20
  sync
  user "xxx w neostrada.pl"
  noauth
  holdoff 3
  persist
  maxfail 0
  usepeerdns
  mru 1500
  mtu 1500

/etc/ppp/options :
  noauth
  usepeerdns
  lock
  noipdefault
-----------------------
podam jeszcze tylko /var/log/messages dla pewnosci. zdaje mi się czy USB
moze byc uszkodzone albo cos...:

Dec 15 22:10:21 white2 kernel: usb-uhci.c: interrupt, status 2, frame# 3
Dec 15 22:10:21 white2 kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7
len 1696 ret -110
Dec 15 22:10:21 white2 kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7
len 1696 ret -110
Dec 15 22:10:22 white2 kernel: usb.c: USB disconnect on device 00:07.2-2
address 2
Dec 15 22:10:22 white2 kernel: hub.c: new USB device 00:07.2-2, assigned
address 3
Dec 15 22:10:22 white2 kernel: Manufacturer: ALCATEL
Dec 15 22:10:22 white2 kernel: Product: Speed Touch 330
Dec 15 22:10:22 white2 kernel: SerialNumber: 0090D0998A0F
Dec 15 22:10:22 white2 kernel: usb.c: USB device 3 (vend/prod 0x6b9/0x4061)
is not claimed by any active driver.
Dec 15 22:10:22 white2 kernel: Length              = 18
Dec 15 22:10:22 white2 kernel: DescriptorType      = 01
Dec 15 22:10:22 white2 kernel: USB version         = 1.10
Dec 15 22:10:22 white2 kernel: Vendor:Product      = 06b9:4061
Dec 15 22:10:22 white2 kernel: MaxPacketSize0      = 8
Dec 15 22:10:22 white2 kernel: NumConfigurations   = 1
Dec 15 22:10:22 white2 kernel: Device version      = 2.00
Dec 15 22:10:22 white2 kernel: Device Class:SubClass:Protocol = ff:00:00
Dec 15 22:10:22 white2 kernel: Vendor class
Dec 15 22:10:22 white2 kernel: Configuration:
Dec 15 22:10:22 white2 kernel: bLength             =    9
Dec 15 22:10:22 white2 kernel: bDescriptorType     =   02
Dec 15 22:10:22 white2 kernel: wTotalLength        = 0093
Dec 15 22:10:22 white2 kernel: bNumInterfaces      =   03
Dec 15 22:10:22 white2 kernel: bConfigurationValue =   01
Dec 15 22:10:22 white2 kernel: iConfiguration      =   00
Dec 15 22:10:22 white2 kernel: bmAttributes        =   80
Dec 15 22:10:22 white2 kernel: MaxPower            =  500mA
Dec 15 22:10:22 white2 kernel:
Dec 15 22:10:22 white2 kernel: Interface: 0
Dec 15 22:10:22 white2 kernel: Alternate Setting:  0
Dec 15 22:10:22 white2 kernel: bLength             =    9
Dec 15 22:10:22 white2 kernel: bDescriptorType     =   04
Dec 15 22:10:22 white2 kernel: bInterfaceNumber    =   00
Dec 15 22:10:22 white2 kernel: bAlternateSetting   =   00
Dec 15 22:10:22 white2 kernel: bNumEndpoints       =   01
Dec 15 22:10:22 white2 kernel: bInterface Class:SubClass:Protocol =
ff:00:00
Dec 15 22:10:22 white2 kernel: iInterface          =   00
Dec 15 22:10:22 white2 kernel: Endpoint:
Dec 15 22:10:22 white2 kernel: bLength             =    7
Dec 15 22:10:22 white2 kernel: bDescriptorType     =   05
Dec 15 22:10:22 white2 kernel: bEndpointAddress    =   81 (in)
Dec 15 22:10:22 white2 kernel: bmAttributes        =   03 (Interrupt)
(...) [jesli potrzebna reszta to prosze pisac...]

prosze o pomoc... co jakis czas ktos musi resetowac połączenie bo inaczej to
klapa. Podpowiedzcie moze cos zle zrobiłem? Drivery kompilowane ze
speedtouch.neostrada.pl i prawie wszystko wg. opisu zresztą sami widzicie.
PLD Ra (1.1) jajo 2.4.20-9

pozdro