instalacja, Read-only file system?

[Tomasz Witek]

W liście z czw, 08-01-2004, godz. 20:50, Papa pisze: 
> Witam uprzejmie,
> 
> Thursday, January 8, 2004, 8:46:53 PM
> 
> Instaluję system przy pomocy RescueCD, pakiety z pliku:
> 
> poldek --install-dist=/dest --pset /aqq/pkgs
> 
> Retrieving ftp://ftp.pld-linux.org/dists/2.0/PLD/i686/PLD/RPMS/geninitrd-3075-1.i686.rpm...
> .................................................. 100.0% [18.1K]
> Installing geninitrd-3075-1.i686.rpm
> .................................................................... 100.0%
> rpmdb: /var/lib/rpm/Triggername: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Filemd5s: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Sha1header: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Sigmd5: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Installtid: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Provideversion: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Requireversion: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Dirnames: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Providename: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Requirename: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Group: unable to flush: Read-only file system
> rpmdb: /var/lib/rpm/Basenames: unable to flush: Read-only file system
> error: db4 error(30) from dbenv->close: Read-only file system
> 
> Pytanie jak pozbyć się komunikatów Read-only file system?
>   

Wlasnie tez tak mialem.
Alem instalacja przebiegla dobrze.
Nie wiem po co in zaglada do lokalnej bazy rpm jak ma install-dist.

tiweK

> 
> Pozdrowienia,
> Andrzej                         mailto:awid w poczta.onet.pl
> 
> 
> _________________________________________
> http://pld-linux.org/ = faq, howto, newsy
> 
> dostales tutaj odpowiedz na swoje pytanie?
> podziel sie z innymi i dopisz do FAQ!
> 		http://pld-linux.org/FAQ/
-- 
Tomasz Witek <tiwek w manta.univ.gda.pl>