CD-ROM na Serial-ATA

[Grzegorz Sójka]

Ryszard Mielcarek wrote:
> 
> Witam,
> mam problem z 'dobraniem sie' do CDka.
> 
> Z dmesga :
> 
> Aug 14 13:19:38 mind kernel: ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6
> bmdma 0xBFA0 irq 14
> Aug 14 13:19:38 mind kernel: ata1: dev 0 cfg 49:2b00 82:346b 83:5b29
> 84:4003 85:3469 86:1a09 87:4003 88:203f
> Aug 14 13:19:38 mind kernel: ata1: dev 0 ATA, max UDMA/100, 117210240
> sectors:
> Aug 14 13:19:38 mind kernel: ata1: dev 0 configured for UDMA/100
> Aug 14 13:19:38 mind kernel: scsi0 : ata_piix
> Aug 14 13:19:38 mind kernel: Vendor: ATA       Model: FUJITSU MHT2060A
> Rev: 006C
> Aug 14 13:19:38 mind kernel: Type:   Direct-Access ANSI SCSI revision: 05
> Aug 14 13:19:38 mind kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376
> bmdma 0xBFA8 irq 15
> Aug 14 13:19:38 mind kernel: ata2: dev 0 cfg 49:0b00 82:0000 83:0000
> 84:0000 85:0000 86:0000 87:0000 88:0407
> Aug 14 13:19:38 mind kernel: ata2: dev 0 ATAPI, max UDMA/33
> Aug 14 13:19:38 mind kernel: ata2: dev 0 configured for UDMA/33
> Aug 14 13:19:38 mind kernel: scsi1 : ata_piix
> Aug 14 13:19:38 mind kernel: SCSI device sda: 117210240 512-byte hdwr
> sectors (60012 MB)
> Aug 14 13:19:38 mind kernel: SCSI device sda: drive cache: write back
> Aug 14 13:19:38 mind kernel: SCSI device sda: 117210240 512-byte hdwr
> sectors (60012 MB)
> Aug 14 13:19:38 mind kernel: SCSI device sda: drive cache: write back
> Aug 14 13:19:38 mind kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
> p4 < p5 p6 p7 >
> Aug 14 13:19:38 mind kernel: Attached scsi disk sda at scsi0, channel 0,
> id 0, lun 0
> 
> 
> Nie mam zielonego pojęcia czego może mi brakować, bądź też - gdzie
> szukać device'a  - żadne /dev/*cd*, ani nic co bym podejrzewal..

Z tego co pamietam to jakiś moduł cd-romu do scsi trzeba załadować.

Pozdrówka
Grze$