USB storage?

[Łukasz Maśko]

Dnia wtorek, 1 lutego 2005 00:42, Michał Łukaszek napisał:
> Spotkał się ktoś z czymś takim?
[...]
> Jakieś pomysły?
Ja mam pendrive, który zawiera dwa urządzenia logiczne i jak się go włoży do 
kompa to dostarcza sdc o pojemności 63MB i sdd o pojemności ok. 1MB 
(wycinek z dmesg-a): 

usb 2-1: new full speed USB device using ohci_hcd and address 4
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
  Vendor:           Model: USB DISK Pro      Rev: 4.0A
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 123904 512-byte hdwr sectors (63 MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
SCSI device sdc: 123904 512-byte hdwr sectors (63 MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 0
  Vendor:           Model: USB DISK Pro      Rev: 4.0A
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdd: 2880 512-byte hdwr sectors (1 MB)
sdd: assuming Write Enabled
sdd: assuming drive cache: write through
SCSI device sdd: 2880 512-byte hdwr sectors (1 MB)
sdd: assuming Write Enabled
sdd: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun1: unknown partition table
Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 1
usb-storage: device scan complete

To drugie nie ma partycji, montuje się przez mount -t vfat /dev/sdd ... I 
oczywiście nie ma sensu robić na tym fdiska - efekt jest taki:

$ fdisk -l /dev/sdd

Disk /dev/sdd: 1 MB, 1474560 bytes
1 heads, 3 sectors/track, 960 cylinders
Units = cylinders of 3 * 512 = 1536 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   ?   600909943   657139785    84344762+  88  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(66, 13, 10) logical=(600909942, 0, 3)
Partition 1 has different physical/logical endings:
     phys=(288, 165, 36) logical=(657139784, 0, 1)
Partition 1 does not end on cylinder boundary.
/dev/sdd2   ?   600515425  1199614851   898649140+  98  Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(361, 97, 35) logical=(600515424, 0, 1)
Partition 2 has different physical/logical endings:
     phys=(362, 110, 41) logical=(1199614850, 0, 3)
Partition 2 does not end on cylinder boundary.
/dev/sdd3   ?   181608652   826951412   968014141   73  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(361, 97, 55) logical=(181608651, 0, 1)
Partition 3 has different physical/logical endings:
     phys=(32, 122, 44) logical=(826951411, 0, 2)
Partition 3 does not end on cylinder boundary.
/dev/sdd4   ?         858  1145038682  1717556736   6f  Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(372, 97, 50) logical=(857, 0, 3)
Partition 4 has different physical/logical endings:
     phys=(390, 119, 33) logical=(1145038681, 0, 2)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order

Czyli dokładnie tak jak u ciebie. I tak ma być. Pod Windows sdd jest 
montowany jako gęsta stacja dyskietek :-D

Pozdrawiam.
-- 
Łukasz Maśko                                          ICQ: 146553537    _o)
Lukasz.Masko(at)ipipan.waw.pl                          GG:   2441498    /\\
Registered Linux User #61028                                           _\_V
-------------- następna część ---------
Załącznik, który nie był tekstem został usunięty...
Name: nie znany
Type: application/pgp-signature
Size: 189 bytes
Desc: nie znany
Url : /mailman/pipermail/pld-users-pl/attachments/20050201/86fcdb91/attachment-0001.bin