idea edge

[Radosław Kintzi]

Kto pomoże skonfigurować? Na razie zainstalowałem:
- kernel-grsecurity-pcmcia
- pcmcia

odpaliłem /etc/rc.d/init.d/pcmcia start i mam:

# lsmod
Module                  Size  Used by
x25                    34964  2
appletalk              29620  0
ipx                    23344  0
netrom                 36380  0
ax25                   48620  1 netrom
serial_cs               7432  1
pcmcia                 18056  3 serial_cs
yenta_socket           18440  2
rsrc_nonstatic          8832  1 yenta_socket
pcmcia_core            40496  4 serial_cs,pcmcia,yenta_socket,rsrc_nonstatic
binfmt_misc             8712  1
nfsd                  202912  9
exportfs                4736  1 nfsd
lockd                  58024  2 nfsd
sunrpc                122436  12 nfsd,lockd
md5                     3968  1
ipv6                  221568  15
e100                   31104  0
mii                     3968  1 e100
uhci_hcd               28560  0
ohci_hcd               18184  0
ehci_hcd               28808  0
usbcore               102776  4 uhci_hcd,ohci_hcd,ehci_hcd
parport_pc             35524  0
parport                30280  1 parport_pc
floppy                 54480  0
pcspkr                  3300  0
psmouse                35480  0
ext3                  120712  6
mbcache                 7428  1 ext3
jbd                    49304  1 ext3
ata_piix                7044  7
libata                 39812  1 ata_piix
sd_mod                 15120  8
scsi_mod               81864  2 libata,sd_mod

# dmesg
Yenta: CardBus bridge found at 0000:05:01.0 [0000:0000]
Yenta: ISA IRQ mask 0x0000, PCI irq 66
Socket status: 30000810
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x1f0-0x1f7 0x3f0-0x47f 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
ttyS2 at I/O 0x3e8 (irq = 66) is a 16550A
NET: Registered protocol family 3
NET: Registered protocol family 6
G4KLX NET/ROM for Linux. Version 0.7 for AX25.037 Linux 2.4
NET: Registered protocol family 4
NET: Registered protocol family 5
NET: Registered protocol family 9
X.25 for Linux. Version 0.2 for Linux 2.1.15
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x1f0-0x1f7 0x3f0-0x47f 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
ttyS2 at I/O 0x3e8 (irq = 66) is a 16550A
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x1f0-0x1f7 0x3f0-0x47f 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.


Jak sprawdzić, pod jakim ttySX mam ten modem? Ktoś może podać jakąś 
konfiguracje dla minicoma (bps/parzystość/bity), tak żebym mógł sobie z 
tym czymś pogadać?

Pozdr
RK