tunel cbr TP S.A. nie chce działać !

[Badman]

Witam
Próbuje założyć tunel ipv6 udostępniany przez tepse. Konfiguruje go 
według opisu na ich stronie jednak nie chce działać

ip tunnel add cbr mode sit local  80.48.93.23 remote 217.96.770.200 ttl 
64 
ip link set cbr up
ip link set cbr mtu 1280
ip addr add 3ffe:4019:1:1::c7:2/112 dev cbr 
ip route add 2000::/3 dev cbr

Mimo tego ping6 nie pinguje irssi pisze, że brak trasy do serwerów ipv6. 
Poniżej wyniki ip

[root w serwer ~]# ip -6 route
3ffe:4019:1:1::c7:0/112 via :: dev cbr  metric 256  mtu 1280 advmss 1220
fe80::/64 dev eth0  metric 256  mtu 1500 advmss 1220
fe80::/64 dev eth1  metric 256  mtu 1500 advmss 1220
fe80::/64 dev eth2  metric 256  mtu 1500 advmss 1220
fe80::/64 via :: dev cbr  metric 256  mtu 1280 advmss 1220
ff00::/8 dev eth0  metric 256  mtu 1500 advmss 1220
ff00::/8 dev eth1  metric 256  mtu 1500 advmss 1220
ff00::/8 dev eth2  metric 256  mtu 1500 advmss 1220
ff00::/8 dev cbr  metric 256  mtu 1280 advmss 1220
default dev eth1  proto kernel  metric 256  mtu 1500 advmss 1220
default dev eth0  proto kernel  metric 256  mtu 1500 advmss 1220
default dev eth2  proto kernel  metric 256  mtu 1500 advmss 1220
default dev cbr  metric 1024  mtu 1280 advmss 1220
unreachable default dev lo  proto none  metric -1  error -101 advmss 
1220

[root w serwer ~]# ip link
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:30:4f:19:77:8c brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:60:97:24:e8:03 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:90:27:bf:ce:45 brd ff:ff:ff:ff:ff:ff
5: sit0 w NONE: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
6: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc pfifo_fast qlen 
3
    link/ppp 
7: cbr w NONE: <POINTOPOINT,NOARP,UP> mtu 1280 qdisc noqueue 
    link/sit 80.48.93.23 peer 217.96.70.200

[root w serwer ~]# ip addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:30:4f:19:77:8c brd ff:ff:ff:ff:ff:ff
    inet6 fe80::230:4fff:fe19:778c/64 scope link 
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:60:97:24:e8:03 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1
    inet6 fe80::260:97ff:fe24:e803/64 scope link 
4: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:90:27:bf:ce:45 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.2/24 brd 192.168.1.255 scope global eth2
    inet6 fe80::290:27ff:febf:ce45/64 scope link 
5: sit0 w NONE: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
6: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc pfifo_fast qlen 
3
    link/ppp 
    inet 10.1.18.236 peer 10.1.18.1/32 scope global ppp0
7: cbr w NONE: <POINTOPOINT,NOARP,UP> mtu 1280 qdisc noqueue 
    link/sit 80.48.93.23 peer 217.96.70.200
    inet6 fe80::5030:5d17/128 scope link 
    inet6 3ffe:4019:1:1::c7:2/112 scope global 

lsmod pokazuje ipv6                  150648  -1  (autoclean) czy to 
normalne ?
uptime: Linux serwer 2.4.32-4 #1 Thu Jan 5 09:52:15 CET 2006 i586 
Pentium_MMX unknown PLD Linux
-- 
Pozdrawiam
Tomasz Gutewicz