lm_sensors i ECS KT600-A

[Lukasz Glebicki]

On Thursday 16 November 2006 14:02, Rafał Cygnarowski wrote:
> Witam!
>
> Czy ma ktoś może skonfigurowane lm_sensors dla ECS KT600-A?
> Próbowałem je ustawić ale dostaję jakieś dziwne wyniki...

U mnie na identycznej płycie sensors daje:

it87-isa-0290
Adapter: ISA adapter
VCore 1:   +1.44 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
VCore 2:   +2.56 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
+3.3V:     +1.02 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
+5V:       +0.62 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
+12V:      +4.54 V  (min = +16.32 V, max = +16.32 V)   ALARM
-12V:     -27.36 V  (min =  +3.93 V, max =  +3.93 V)   ALARM
-5V:      -13.64 V  (min =  +4.03 V, max =  +4.03 V)   ALARM
Stdby:     +0.00 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
VBat:      +2.03 V
fan1:     2481 RPM  (min =    0 RPM, div = 8)
fan2:        0 RPM  (min =    0 RPM, div = 8)
fan3:        0 RPM  (min =    0 RPM, div = 8)
M/B Temp:   +127°C  (low  =  +127°C, high =   +60°C)   sensor = thermistor 
ALARM
CPU Temp:    +32°C  (low  =  +127°C, high =   +60°C)   sensor = diode
Temp3:      +127°C  (low  =  +127°C, high =   +60°C)   sensor = thermistor   
ALARM

Te wyniki też są dziwne, dlatego je olałem. Prawdziwe jest na pewno fan1 czy 
CPU TEMPU .

pozdrawiam

-- 
Łukasz Głębicki  mail/rot13:yhxnfmty w cbfg.cy  PLD/Linux Team
gg:246267    Linux Registered User #318551   blekot:{irc,skype}

Student of Warsaw University of Technology, Faculty of Mechatronics