globtrotter i orange raz jeszcze

[MK]

Modem GT 3G+ EMEA. Skorzystalem z archiwum i utworzylem:


-------------------
grep -v ^# /etc/ppp/peers/orange-connect-chat
-------------------
 echo $*
 exec chat       \
         TIMEOUT 5       \
         ABORT   '\nBUSY\r'      \
         ABORT   '\nERROR\r'     \
         ABORT   '\nNO ANSWER\r' \
         ABORT   '\nNO CARRIER\r'        \
         ABORT   '\nNO DIALTONE\r'       \
         SAY     "Inicjowanie modemu..." \
         ""      "AT"    \
         OK      "AT+CPIN?"\
         "READY\r\n\r\nOK"-"AT+CPIN=\"1234\""-OK ""\
         OK-AT-OK "AT+CGDCONT=1,\"IP\",\"internet\""     \
         SAY     "\nModem zainicjowany." \
         OK      "ATD *99#"      \
         TIMEOUT 30      \
         SAY     "\nOczekiwanie na polaczenie..."        \
         CONNECT ""      \
         SAY     "\nPolaczony.\n"

-------------------
~# grep -v ^# /etc/ppp/peers/orange
-------------------
 updetach
 debug
 connect /etc/ppp/peers/orange-connect-chat
 disconnect /etc/ppp/peers/orange-disconnect-chat
 /dev/noz0
 115200
 crtscts
 local
 noipdefault
 defaultroute
 replacedefaultroute
 novj
 nobsdcomp
 novjccomp
 nopcomp
 noaccomp


------------------
dmesg
-----------------
pccard: CardBus card inserted into slot 0
[1504] nozomi_card_init(): Init, cards_found: 1
[1390] nozomi_get_card_type(): Card type is: 2048
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKF] -> GSI 10 (level,
low) -> IRQ 10
Nozomi driver nozomi_tty<6>[836] nozomi_read_config_table(): Version of
card: 3
[828] nozomi_read_config_table(): Initialization OK!

--------------
mam /dev/noz0  /dev/noz1  /dev/noz2  /dev/noz3
--------------


po wpisaniu:

pppd call orange
dostaje:
Inicjowanie modemu...
Connect script failed
---
w logach:

Oct 26 20:49:41 max pppd[5629]: pppd 2.4.2 started by root, uid 0
Oct 26 20:49:46 max pppd[5629]: Connect script failed
Oct 26 20:49:46 max pppd[5629]: Exit.

Porsze o pomoc jak to bardziej zdiagnozowac albo co robie zle :)