PLD AC - macierz podłączona przez FC
Krzysztof Opyrchał
krzysztof_opyrchal w wp.pl
Pią, 11 Mar 2011, 09:25:42 CET
Arkadiusz Miskiewicz wrote:
> On Friday 11 of March 2011, Krzysztof Opyrchał wrote:
>
>> No właśnie tego typu komunikatów nie widzę.
>>
>> Podaję lsmod:
>> Module Size Used by
>> nfs 205240 1
>> nfsd 243344 13
>> lockd 64784 3 nfs,nfsd
>> sunrpc 137032 10 nfs,nfsd,lockd
>> ipv6 275072 101
>> forcedeth 57488 0
>> reiserfs 241528 1
>> raid1 26496 2
>> md_mod 71068 4 raid1
>> dm_mod 52688 0
>> sd_mod 22528 8
>> mptspi 13832 4
>> mptscsih 38400 1 mptspi
>> mptbase 52448 2 mptspi,mptscsih
>> qla2xxx 134124 0
>> scsi_transport_fc 31872 1 qla2xxx
>> scsi_mod 91920 5
>> sd_mod,mptspi,mptscsih,qla2xxx,scsi_transport_fc
>> xfs 493368 7
>> exportfs 12544 2 nfsd,xfs
>> ide_disk 21248 8
>> amd74xx 21808 0 [permanent]
>> ide_core 127152 2 ide_disk,amd74xx
>>
>> Macierz jest podłączona też do drugiego serwera i tam nie ma problemu.
>> Ale to jest OpenSUSE 11.2. Co ewentualnie mogę zrobić?
>
> Wkleić dmesga, podajesz za każdym razem minimum informacji zamiast podać
> jak najwięcej.
>
>> Pozdrawiam
>> Krzysztof Opyrchał
>
>
Bootdata ok (command line is auto BOOT_IMAGE=PLD ro root=301)
Linux version 2.6.16.62-1smp (builder w oberon-pld) (gcc version 3.3.6 (PLD
Linux)) #1 SMP Tue Aug 18 03:04:23 UTC 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000096400 (usable)
BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff20000 (usable)
BIOS-e820: 00000000cff20000 - 00000000cff2d000 (ACPI data)
BIOS-e820: 00000000cff2d000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 PTLTD ) @
0x00000000000f78b0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x00000000cff287d2
ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @
0x00000000cff2cd76
ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @
0x00000000cff2cdea
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @
0x00000000cff2ced2
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x00000000cff2cf22
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x00000000cff2cfb4
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x00000000cff2cfdc
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 1 PXM 1 80000000-d0000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000080000000
Bootmem setup node 1 0000000080000000-00000000cff20000
On node 0 totalpages: 515720
DMA zone: 2640 pages, LIFO batch:0
DMA32 zone: 513080 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
On node 1 totalpages: 322980
DMA zone: 0 pages, LIFO batch:0
DMA32 zone: 322980 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xdc200000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xdc200000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xdc201000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xdc201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 2 zonelists
Kernel command line: auto BOOT_IMAGE=PLD ro root=301
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2411.122 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3348124k/3406976k available (2189k kernel code, 58428k reserved,
1155k data, 196k init)
Calibrating delay using timer specific routine.. 4829.78 BogoMIPS
(lpj=9659567)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Node 0 -> Core 0
ACPI Warning (nsload-0106): Zero-length AML block in table [SSDT] [20060127]
Using local APIC timer interrupts.
result 12557962
Detected 12.557 MHz APIC timer.
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4822.78 BogoMIPS
(lpj=9645568)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Node 0 -> Core 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 11 cycles, maxerr 593 cycles)
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 4822.55 BogoMIPS
(lpj=9645114)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2(2) -> Node 1 -> Core 0
Dual Core AMD Opteron(tm) Processor 280 stepping 02
CPU 2: Syncing TSC to CPU 0.
CPU 2: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 1153 cycles)
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4823.52 BogoMIPS
(lpj=9647042)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3(2) -> Node 1 -> Core 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
CPU 3: Syncing TSC to CPU 0.
CPU 3: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 1153 cycles)
Brought up 4 CPUs
testing NMI watchdog ... OK.
migration_cost=346,534
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 833k freed
DMI present.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:04.0
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Root Bridge [PCI2] (0000:08)
PCI: Probing PCI hardware (bus 08)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:80)
PCI: Probing PCI hardware (bus 80)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI-DMA: Disabling IOMMU.
pnp: 00:02: ioport range 0x8000-0x807f could not be reserved
pnp: 00:02: ioport range 0x8080-0x80ff has been reserved
pnp: 00:02: ioport range 0x8400-0x847f has been reserved
pnp: 00:02: ioport range 0x8480-0x84ff has been reserved
pnp: 00:02: ioport range 0x8800-0x887f has been reserved
pnp: 00:02: ioport range 0x8880-0x88ff has been reserved
pnp: 00:02: ioport range 0x5000-0x503f has been reserved
pnp: 00:02: ioport range 0x5040-0x507f has been reserved
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: d4100000-dbffffff
PREFETCH window: d1000000-d10fffff
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:08:0a.0
IO window: 2000-2fff
MEM window: dc300000-dc3fffff
PREFETCH window: d1100000-d11fffff
PCI: Bridge: 0000:08:0b.0
IO window: 3000-3fff
MEM window: dc400000-dc7fffff
PREFETCH window: d1200000-d13fffff
PCI: Bridge: 0000:80:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:0e.0 to 64
Simple Boot Flag at 0x36 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1299780592.960:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
PCI: MSI quirk detected. MSI disabled.
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:80:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
PCI0 COM1 PS2K PS2M USB0 USB2 MAC0 P2P0 G0PA G0PB MAC0
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: ST3250820A, ATA DISK drive
hdb: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug
enabled
SGI XFS Quota Management subsystem
Suspend2: Initrd lacks echo > /proc/suspend2/do_resume.
XFS mounting filesystem hda1
Ending clean XFS mount for filesystem: hda1
VFS: Mounted root (xfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 196k freed
Adding 1044216k swap on /dev/hda2. Priority:-1 extents:1 across:1044216k
SCSI subsystem initialized
QLogic Fibre Channel HBA Driver
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 30 (level, low) -> IRQ 177
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=177
Vendor: SEAGATE Model: ST3300007LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST3300007LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:0a:06.1[B] -> GSI 31 (level, low) -> IRQ 185
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=185
SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB)
sda: Write Protect is off
sda: Mode Sense: ab 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB)
sda: Write Protect is off
sda: Mode Sense: ab 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1
sd 0:0:2:0: Attached scsi disk sda
SCSI device sdb: 585937500 512-byte hdwr sectors (300000 MB)
sdb: Write Protect is off
sdb: Mode Sense: ab 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 585937500 512-byte hdwr sectors (300000 MB)
sdb: Write Protect is off
sdb: Mode Sense: ab 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1
sd 0:0:3:0: Attached scsi disk sdb
SCSI device sdc: 585937500 512-byte hdwr sectors (300000 MB)
sdc: Write Protect is off
sdc: Mode Sense: ab 00 10 08
SCSI device sdc: drive cache: write back w/ FUA
SCSI device sdc: 585937500 512-byte hdwr sectors (300000 MB)
sdc: Write Protect is off
sdc: Mode Sense: ab 00 10 08
SCSI device sdc: drive cache: write back w/ FUA
sdc: sdc1
sd 0:0:4:0: Attached scsi disk sdc
SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB)
sdd: Write Protect is off
sdd: Mode Sense: ab 00 10 08
SCSI device sdd: drive cache: write back w/ FUA
SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB)
sdd: Write Protect is off
sdd: Mode Sense: ab 00 10 08
SCSI device sdd: drive cache: write back w/ FUA
sdd: sdd1
sd 0:0:5:0: Attached scsi disk sdd
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel w redhat.com
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: md0 stopped.
md: bind<sdd1>
md: bind<sdc1>
md: raid1 personality registered for level 1
raid1: raid set md0 active with 2 out of 2 mirrors
md: md1 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md1 active with 2 out of 2 mirrors
XFS mounting filesystem hda3
Ending clean XFS mount for filesystem: hda3
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem md0
Ending clean XFS mount for filesystem: md0
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.62-Driver
Package V1.23.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 23 (level, high) -
> IRQ 193
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010f1:2895 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LNK3] -> GSI 19 (level, high) -
> IRQ 201
PCI: Setting latency timer of device 0000:80:0a.0 to 64
forcedeth: using HIGHDMA
eth1: forcedeth.c: subsystem: 010f1:2895 bound to 0000:80:0a.0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
eth0: link up.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir w monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Więcej informacji o liście pld-users-pl