From masko w ipipan.waw.pl Mon Feb 1 10:15:33 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Mon, 01 Feb 2016 10:15:33 +0100 Subject: iceweasel In-Reply-To: References: <3364178.WKsCBuSMt4@dlaptok> Message-ID: <4292509.TnQMs50MLE@geralt> Dnia piątek, 29 stycznia 2016 23:29:51 Marcin Banasiak pisze: [...] > Brak poprawnego przywracania sesji jest najprawdopodobniej spowodowany > popsutym skryptem /usr/bin/iceweasel. Wykorzystuje on ciągle opcję > -remote, która zgodnie z > https://bugzilla.mozilla.org/show_bug.cgi?id=1080319 została usunięta > w wersji 39.0. Dziękuję za poprawki z wersji 44.0-2, teraz problem z przywracaniem sesji zniknął a przy okazji iceweasel o wiele szybciej wstaje. -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V From pld w sojka.co Mon Feb 1 17:20:41 2016 From: pld w sojka.co (=?UTF-8?Q?Grzesiek_S=c3=b3jka?=) Date: Mon, 1 Feb 2016 17:20:41 +0100 Subject: iceweasel In-Reply-To: <4292509.TnQMs50MLE@geralt> References: <3364178.WKsCBuSMt4@dlaptok> <4292509.TnQMs50MLE@geralt> Message-ID: <56AF85D9.4050602@sojka.co> On 02/01/16 10:15, Łukasz Maśko wrote: > Dnia piątek, 29 stycznia 2016 23:29:51 Marcin Banasiak pisze: > [...] >> Brak poprawnego przywracania sesji jest najprawdopodobniej spowodowany >> popsutym skryptem /usr/bin/iceweasel. Wykorzystuje on ciągle opcję >> -remote, która zgodnie z >> https://bugzilla.mozilla.org/show_bug.cgi?id=1080319 została usunięta >> w wersji 39.0. > > Dziękuję za poprawki z wersji 44.0-2, teraz problem z przywracaniem sesji > zniknął a przy okazji iceweasel o wiele szybciej wstaje. > Skąd zassać poprawione pakiety?? -- Pozdriówka Grzesiek Najlepszym przyjacielem człowieka wcale nie jest pies a .. ... kolonia drożdży. Duża kolonia => mnóstwo (% ;) ) radości. From masko w ipipan.waw.pl Mon Feb 1 18:04:22 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Mon, 01 Feb 2016 18:04:22 +0100 Subject: iceweasel In-Reply-To: <56AF85D9.4050602@sojka.co> References: <4292509.TnQMs50MLE@geralt> <56AF85D9.4050602@sojka.co> Message-ID: <2719372.ye06gG0TD7@laptok> Dnia poniedziałek, 1 lutego 2016 17:20:41 Grzesiek Sójka pisze: [...] > Skąd zassać poprawione pakiety?? Th/test. -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana" From sir_Misiek w o2.pl Fri Feb 5 16:30:38 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 5 Feb 2016 16:30:38 +0100 Subject: iceweasel In-Reply-To: <1491384.lVbnftTk9q@dlaptok> References: <20151217125752.6b8b4567@zonk.pl> <5672B9D1.4010903@o2.pl> <1491384.lVbnftTk9q@dlaptok> Message-ID: <56B4C01E.5070201@o2.pl> >> A skąd to cholerstwo pobrać ? > Zbudować sobie z git-a mozilla-firefox-bin? iceweasel 44 też mi się wywala. Jak by ktoś potrzebował. Zbudowałem sobie mozillę. # GIT Instalujemy poldek -i rpm-build-tools git-core git-core-svn zip builder --init-rpm-dir builder -bb mozilla-firefox-bin Paczki wpadają do: ~/rpm/RPMS/ rpm -ivh mozilla-firefox-bin-44.0-1.x86_64.rpm From sir_Misiek w o2.pl Fri Feb 5 16:38:57 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 5 Feb 2016 16:38:57 +0100 Subject: menu start - vfmg - aktualizacje Message-ID: Po ostatnich aktualizacjach zniknęło mi menu start z icewm ;-/ Może się komuś przyda rozwiązanie. [grzegorz w Misiek1 ~]$ cat .icewm/menu menuprog "Programs" /usr/share/icewm/icons/folder_16x16.xpm vfmg -i -f -x -c -s icewm prog "Ms-Zsk" /usr/share/pixmaps/links2.png /Zsk/startice.sh separator menu "Moje programy" /usr/share/pixmaps/icewm/kvirc_32x32.xpm { prog "teamviewer-11" "/usr/share/pixmaps/icewm/communicator-mail_32x32.xpm" /usr/bin/teamviewer prog "torbrowser" "/usr/share/pixmaps/icewm/navigator_32x32.xpm" /usr/bin/torbrowser prog "Ms-Zsk" /usr/share/pixmaps/links2.png /Zsk/startice.sh } [grzegorz w Misiek1 ~]$ vfmg -i -f -x -c -s icewm Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE HOME}/ at /usr/bin/vfmg line 209. Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) at /usr/bin/vfmg line 895. Zakomentowałem w linie 895 i wszystko chula. From arekm w maven.pl Fri Feb 5 17:09:22 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 5 Feb 2016 17:09:22 +0100 Subject: menu start - vfmg - aktualizacje In-Reply-To: References: Message-ID: <201602051709.22650.arekm@maven.pl> On Friday 05 of February 2016, lord_Niedzwiedz wrote: > Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) Spróbuj tam wyrzucić słówko defined i zostawić if (%hash) -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From sir_Misiek w o2.pl Sat Feb 6 09:33:22 2016 From: sir_Misiek w o2.pl (lord Niedzwiedz) Date: Sat, 6 Feb 2016 09:33:22 +0100 Subject: menu start - vfmg - aktualizacje In-Reply-To: <201602051709.22650.arekm@maven.pl> References: <201602051709.22650.arekm@maven.pl> Message-ID: <56B5AFD2.5020908@o2.pl> >> Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) > Spróbuj tam wyrzucić słówko defined i zostawić if (%hash) Pomogło ;-) From fvk w net-arena.pl Fri Feb 12 12:07:37 2016 From: fvk w net-arena.pl (Radek Pilawka) Date: Fri, 12 Feb 2016 12:07:37 +0100 Subject: upgrade - kernel, systemd Message-ID: Witam. Porwałem się na dist-upgrade na leciwym serwerku. Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego jajka - obecne to kernel-3.0.4-2 Po próbie zainstalowania 3.18 mam: 21:kernel-3.18-module-buil########################################### [ 72%] 22:kernel-3.18-source ########################################### [ 76%] 23:plymouth-scripts ########################################### [ 79%] 24:plymouth ########################################### [ 83%] 25:dracut ########################################### [ 86%] 26:kernel-3.18 ########################################### [ 90%] 27:kernel-3.18-ide ########################################### [ 93%] 28:kernel-3.18-net-e1000e ########################################### [ 97%] 29:kernel-3.18-net-r8168 ########################################### [100%] /sbin/geninitrd: : bad substitution /sbin/geninitrd[1524]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1629]: : bad substitution /sbin/geninitrd[1635]: : bad substitution /sbin/geninitrd[1646]: : bad substitution dracut: systemd-initrd needs systemd in the initramfs dracut: dracut-systemd needs systemd-initrd in the initramfs Próba zainstalowania systemd: poldek:/all-avail> install systemd- Przetwarzanie zależności... systemd-221-11.i686 zaznaczył agetty-2.27.1-2.i686 (wł. agetty) systemd-221-11.i686 zaznaczył libmicrohttpd-0.9.46-1.i686 (wł. libmicrohttpd >= 0.9.33) systemd-221-11.i686 zaznaczył qrencode-libs-3.4.4-3.i686 (wł. libqrencode.so.3) systemd-221-11.i686 zaznaczył libseccomp-2.1.1-2.i686 (wł. libseccomp.so.2) błąd: systemd-221-11.i686: nie znaleziono wymaganego uname(release) >= 3.7 Jest 5 pakietów do instalacji (4 zaznaczone pośrednio): I systemd-221-11.i686 D agetty-2.27.1-2.i686 libmicrohttpd-0.9.46-1.i686 libseccomp-2.1.1-2.i686 qrencode-libs-3.4.4-3.i686 This operation will use 14.2MB of disk space. Potrzeba pobrać 3.2MB archiwów (3.2MB do pobrania). błąd: 1 niespełniona zależność Wystąpiły błędy podczas instalacji Jak to teraz ugryźć dalej, żeby po reboot nie gonić do maszyny? Zainstalować systemd przez -nodeps? initrd wygenerował się w /boot dla nowego jajka, grub.cfg nie. Radek From arekm w maven.pl Fri Feb 12 12:11:38 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 12 Feb 2016 12:11:38 +0100 Subject: upgrade - kernel, systemd In-Reply-To: References: Message-ID: <201602121211.38567.arekm@maven.pl> On Friday 12 of February 2016, Radek Pilawka wrote: > Witam. > > Porwałem się na dist-upgrade na leciwym serwerku. > Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego jajka - > obecne to kernel-3.0.4-2 > Po próbie zainstalowania 3.18 mam: Jak nie miałeś dracuta to go wywal. > /sbin/geninitrd: : bad substitution > /sbin/geninitrd[1524]: : bad substitution > /sbin/geninitrd[1629]: : bad substitution Co jest w tych linijkach? -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From mateusz-lists w ant.gliwice.pl Fri Feb 12 12:21:06 2016 From: mateusz-lists w ant.gliwice.pl (Mateusz Korniak) Date: Fri, 12 Feb 2016 12:21:06 +0100 Subject: upgrade - kernel, systemd In-Reply-To: References: Message-ID: <1484684.IAo6aggzDq@matkor-toshiba> On Friday 12 February 2016 12:07:37 Radek Pilawka wrote: > Porwałem się na dist-upgrade na leciwym serwerku. > Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego jajka - > obecne to kernel-3.0.4-2 > Po próbie zainstalowania 3.18 mam: > (...) > /sbin/geninitrd: : bad substitution > /sbin/geninitrd[1524]: : bad substitution > /sbin/geninitrd[1629]: : bad substitution > (...) Zaktualizować geninitrd i jeszcze raz uruchomić: /sbin/geninitrd ? > Próba zainstalowania systemd: > > błąd: systemd-221-11.i686: nie znaleziono wymaganego uname(release) >= > 3.7 > (...) > Jak to teraz ugryźć dalej, żeby po reboot nie gonić do maszyny? > Zainstalować systemd przez -nodeps? Lepiej nie, systemd chce kernela > 3.7 więc jak przejdzie kernel to systemd powinein przejść. > initrd wygenerował się w /boot dla nowego jajka, grub.cfg nie. No to z palca (po zainstalowaniu kernela) update-grub -- Mateusz Korniak "(...) mam brata - poważny, domator, liczykrupa, hipokryta, pobożniś, krótko mówiąc - podpora społeczeństwa." Nikos Kazantzakis - "Grek Zorba" From fvk w net-arena.pl Fri Feb 12 12:21:35 2016 From: fvk w net-arena.pl (Radek Pilawka) Date: Fri, 12 Feb 2016 12:21:35 +0100 Subject: upgrade - kernel, systemd In-Reply-To: <201602121211.38567.arekm@maven.pl> References: <201602121211.38567.arekm@maven.pl> Message-ID: <737bf9d546006b4e111b974e457d2842@interarena.pl> W dniu 2016-02-12 12:11, Arkadiusz Miśkiewicz napisał(a): > On Friday 12 of February 2016, Radek Pilawka wrote: >> Witam. >> >> Porwałem się na dist-upgrade na leciwym serwerku. >> Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego jajka >> - >> obecne to kernel-3.0.4-2 >> Po próbie zainstalowania 3.18 mam: > > Jak nie miałeś dracuta to go wywal. > >> /sbin/geninitrd: : bad substitution >> /sbin/geninitrd[1524]: : bad substitution >> /sbin/geninitrd[1629]: : bad substitution > > Co jest w tych linijkach? 1524 inst_exec $busybox /bin/busybox 1625 if is_yes "$USE_UDEV"; then 1626 initrd_gen_udev 1627 else 1628 initrd_gen_mdev 1629 fi 1635 initrd_gen_blkid 1640 initrd_gen_md 1641 initrd_gen_lvm 1642 initrd_gen_bcache 1643 initrd_gen_blkid 1644 initrd_gen_luks 1645 initrd_gen_setrootdev 1646 fi -- Radek Pilawka From bszx-pld w bszx.eu Fri Feb 12 12:25:09 2016 From: bszx-pld w bszx.eu (Bartek Szady) Date: Fri, 12 Feb 2016 12:25:09 +0100 Subject: iceweasel In-Reply-To: <56AB72E0.1040707@bszx.eu> References: <56AB72E0.1040707@bszx.eu> Message-ID: <56BDC115.1050607@bszx.eu> On 01/29/16 15:10, Bartek Szady wrote: > > iceweasel w wersji 44.0-1 wywala się nadal. 44.0.1-1 tak samo. Pozdrawiam Bartek From fvk w net-arena.pl Fri Feb 12 13:28:41 2016 From: fvk w net-arena.pl (Radek Pilawka) Date: Fri, 12 Feb 2016 13:28:41 +0100 Subject: upgrade - kernel, systemd In-Reply-To: <1484684.IAo6aggzDq@matkor-toshiba> References: <1484684.IAo6aggzDq@matkor-toshiba> Message-ID: <499c13e5de91904de9695a6ed8bb35ee@interarena.pl> W dniu 2016-02-12 12:21, Mateusz Korniak napisał(a): > On Friday 12 February 2016 12:07:37 Radek Pilawka wrote: >> Porwałem się na dist-upgrade na leciwym serwerku. > >> Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego jajka >> - >> obecne to kernel-3.0.4-2 >> Po próbie zainstalowania 3.18 mam: >> (...) >> /sbin/geninitrd: : bad substitution >> /sbin/geninitrd[1524]: : bad substitution >> /sbin/geninitrd[1629]: : bad substitution >> (...) > > Zaktualizować geninitrd i jeszcze raz uruchomić: > /sbin/geninitrd > ? geninitrd mam aktualny. /sbin/geninitrd dalej sypie tymi błędami, ale initrd się generuje. Chyba zaryzykuję reboot wieczorem. -- Radek Pilawka From masko w ipipan.waw.pl Fri Feb 12 17:10:01 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Fri, 12 Feb 2016 17:10:01 +0100 Subject: iceweasel In-Reply-To: <56BDC115.1050607@bszx.eu> References: <56AB72E0.1040707@bszx.eu> <56BDC115.1050607@bszx.eu> Message-ID: <1523134.Ws7ZG3CD4u@laptok> Dnia piątek, 12 lutego 2016 12:25:09 Bartek Szady pisze: > On 01/29/16 15:10, Bartek Szady wrote: > > iceweasel w wersji 44.0-1 wywala się nadal. > > 44.0.1-1 tak samo. Na konkretnych stronach czy ot tak po prostu? Mi ostatnio nie sprawia problemów chociaż muszę przyznać, że nie używam go zbyt wiele (na "korzyść" chrome od Google). -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana" From fvk w net-arena.pl Fri Feb 12 18:55:59 2016 From: fvk w net-arena.pl (Radek Pilawka) Date: Fri, 12 Feb 2016 18:55:59 +0100 Subject: upgrade - kernel, systemd In-Reply-To: <499c13e5de91904de9695a6ed8bb35ee@interarena.pl> References: <1484684.IAo6aggzDq@matkor-toshiba> <499c13e5de91904de9695a6ed8bb35ee@interarena.pl> Message-ID: <9dfc7c7b364ed9c79f7da8692ff0f241@interarena.pl> W dniu 2016-02-12 13:28, Radek Pilawka napisał(a): > W dniu 2016-02-12 12:21, Mateusz Korniak napisał(a): >> On Friday 12 February 2016 12:07:37 Radek Pilawka wrote: >>> Porwałem się na dist-upgrade na leciwym serwerku. >> >>> Poszło nawet gładko, ale potem zachciało mi się jeszcze nowszego >>> jajka - >>> obecne to kernel-3.0.4-2 >>> Po próbie zainstalowania 3.18 mam: >>> (...) >>> /sbin/geninitrd: : bad substitution >>> /sbin/geninitrd[1524]: : bad substitution >>> /sbin/geninitrd[1629]: : bad substitution >>> (...) >> >> Zaktualizować geninitrd i jeszcze raz uruchomić: >> /sbin/geninitrd >> ? > > geninitrd mam aktualny. /sbin/geninitrd dalej sypie tymi błędami, ale > initrd się generuje. > Chyba zaryzykuję reboot wieczorem. Reboot poszedł, system wstał. Przy okazji zauważyłem, że jeśli zmienię #!/bin/sh na #!/bin/bash w /sbin/geninitrd to nie sypie tymi błędami. Niestety dalej poszło już gorzej - zainstalowałem systemd. Kolejny reboot i system się nie podniósł :/ Przy instalacji miałem coś takiego: poldek:/all-avail> install systemd systemd-libs-221-11.i686 systemd-units-221-11.i686 systemd-init-221-11.i686 systemd-libs-221-11.i686: equal version installed, skipped systemd-units-221-11.i686: equal version installed, skipped Przetwarzanie zależności... systemd-221-11.i686 zaznaczył agetty-2.27.1-2.i686 (wł. agetty) systemd-221-11.i686 zaznaczył libmicrohttpd-0.9.46-1.i686 (wł. libmicrohttpd >= 0.9.33) systemd-221-11.i686 zaznaczył qrencode-libs-3.4.4-3.i686 (wł. libqrencode.so.3) systemd-221-11.i686 zaznaczył libseccomp-2.1.1-2.i686 (wł. libseccomp.so.2) SysVinit-2.88-18.i686 zostanie zastąpiony przez systemd-init-221-11.i686 Jest 6 pakietów do instalacji (4 zaznaczone pośrednio), 1 do usunięcia: I systemd-221-11.i686 systemd-init-221-11.i686 D agetty-2.27.1-2.i686 libmicrohttpd-0.9.46-1.i686 libseccomp-2.1.1-2.i686 qrencode-libs-3.4.4-3.i686 R SysVinit-2.88-18.i686 This operation will use 14.0MB of disk space. Potrzeba pobrać 3.2MB archiwów (3.2MB do pobrania). Pobieranie [1/6] th::agetty-2.27.1-2.i686.rpm... .............................. 100.0% [34.1K (34.1K/s)] Pobieranie [2/6] th::libmicrohttpd-0.9.46-1.i686.rpm... .............................. 100.0% [91.4K (91.4K/s)] Pobieranie [3/6] th::libseccomp-2.1.1-2.i686.rpm... .............................. 100.0% [32.6K (32.6K/s)] Pobieranie [4/6] th::qrencode-libs-3.4.4-3.i686.rpm... .............................. 100.0% [40.2K (40.2K/s)] Pobieranie [5/6] th::systemd-221-11.i686.rpm... .............................. 100.0% [3.0M (558.8K/s)] Pobieranie [6/6] th::systemd-init-221-11.i686.rpm... .............................. 100.0% [14.1K (14.1K/s)] Uruchamianie pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1... Przygotowywanie... ########################################### [100%] Ponowne pakowanie... 1:SysVinit ########################################### [100%] Uaktualnianie... 1:qrencode-libs ########################################### [ 17%] 2:libseccomp ########################################### [ 33%] 3:libmicrohttpd ########################################### [ 50%] 4:agetty ########################################### [ 67%] Adding group systemd-journal GID=288. Adding group systemd-bus-proxy GID=315. Adding user systemd-bus-proxy UID=315. Adding group systemd-network GID=316. Adding user systemd-network UID=316. Adding group systemd-resolve GID=317. Adding user systemd-resolve UID=317. Adding group systemd-timesync GID=318. Adding user systemd-timesync UID=318. Adding group systemd-journal-remote GID=319. Adding user systemd-journal-remote UID=319. Adding group systemd-journal-upload GID=320. Adding user systemd-journal-upload UID=320. 5:systemd ########################################### [ 83%] Initializing machine ID from D-Bus machine ID. Failed to get D-Bus connection: Operacja niedozwolona 6:systemd-init ########################################### [100%] Couldn't find an alternative telinit implementation to spawn. Co popsułem i jak to naprawić? -- Radek Pilawka From arekm w maven.pl Fri Feb 12 19:17:53 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 12 Feb 2016 19:17:53 +0100 Subject: upgrade - kernel, systemd In-Reply-To: <9dfc7c7b364ed9c79f7da8692ff0f241@interarena.pl> References: <499c13e5de91904de9695a6ed8bb35ee@interarena.pl> <9dfc7c7b364ed9c79f7da8692ff0f241@interarena.pl> Message-ID: <201602121917.53405.arekm@maven.pl> On Friday 12 of February 2016, Radek Pilawka wrote: > Co popsułem i jak to naprawić? init=/bin/systemd systemd.unit=graphical.target przy bootowaniu może? (u siebie nie wrzucam systemd-init dzięki czemu SysVinit nadal może istnieć, a przełączanie jest tylko przez init= przy bootowaniu) -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From sls w pld-linux.org Fri Feb 12 21:00:25 2016 From: sls w pld-linux.org (Szymon Siwek) Date: Fri, 12 Feb 2016 21:00:25 +0100 Subject: iceweasel In-Reply-To: <1523134.Ws7ZG3CD4u@laptok> References: <56AB72E0.1040707@bszx.eu> <56BDC115.1050607@bszx.eu> <1523134.Ws7ZG3CD4u@laptok> Message-ID: <20160212200025.GA3002@szydlo> On Fri, Feb 12, 2016 at 05:10:01PM +0100, Łukasz Maśko wrote: > Dnia piątek, 12 lutego 2016 12:25:09 Bartek Szady pisze: > > On 01/29/16 15:10, Bartek Szady wrote: > > > iceweasel w wersji 44.0-1 wywala się nadal. > > > > 44.0.1-1 tak samo. > > Na konkretnych stronach czy ot tak po prostu? Mi ostatnio nie sprawia > problemów chociaż muszę przyznać, że nie używam go zbyt wiele (na "korzyść" > chrome od Google). U mnie na losowych stronach, głownie przy przewijaniu treści. 44.0.1-1 nie sprawdzałem; przebudowałem sobie 44.0-2 z "-O1" - bez różnicy. -- Szymon Siwek From fvk w net-arena.pl Sat Feb 13 10:52:42 2016 From: fvk w net-arena.pl (Radek Pilawka) Date: Sat, 13 Feb 2016 10:52:42 +0100 Subject: upgrade - kernel, systemd In-Reply-To: <201602121917.53405.arekm@maven.pl> References: <499c13e5de91904de9695a6ed8bb35ee@interarena.pl> <9dfc7c7b364ed9c79f7da8692ff0f241@interarena.pl> <201602121917.53405.arekm@maven.pl> Message-ID: W dniu 2016-02-12 19:17, Arkadiusz Miśkiewicz napisał(a): > On Friday 12 of February 2016, Radek Pilawka wrote: > >> Co popsułem i jak to naprawić? > > init=/bin/systemd systemd.unit=graphical.target > > przy bootowaniu może? > > (u siebie nie wrzucam systemd-init dzięki czemu SysVinit nadal może > istnieć, a > przełączanie jest tylko przez init= przy bootowaniu) Okazało się, że system działał.. ale network.service było disabled :) Dzięki za pomoc. -- Radek Pilawka From bszx-pld w bszx.eu Sat Feb 13 11:32:09 2016 From: bszx-pld w bszx.eu (Bartek Szady) Date: Sat, 13 Feb 2016 11:32:09 +0100 Subject: iceweasel In-Reply-To: <1523134.Ws7ZG3CD4u@laptok> References: <56AB72E0.1040707@bszx.eu> <56BDC115.1050607@bszx.eu> <1523134.Ws7ZG3CD4u@laptok> Message-ID: <56BF0629.304@bszx.eu> On 02/12/16 17:10, Łukasz Maśko wrote: > Dnia piątek, 12 lutego 2016 12:25:09 Bartek Szady pisze: >> On 01/29/16 15:10, Bartek Szady wrote: >>> iceweasel w wersji 44.0-1 wywala się nadal. >> 44.0.1-1 tak samo. > Na konkretnych stronach czy ot tak po prostu? Mi ostatnio nie sprawia > problemów chociaż muszę przyznać, że nie używam go zbyt wiele (na "korzyść" > chrome od Google). Tak po prostu. Tym razem padł gdy zostawiłem laptopa z zablokowanym ekranem. Podziałał ok 12h. Iceweasel uruchamiam przywracając poprzednią sesję czyli zwykle mam otwarte >20 okien z kilkunastoma zakładkami w każdym. Wersje niepadające (<=39 o ile mnie pamięć nie myli) działały z czasem coraz wolniej tak że po ok tygodniu musiałem restartować bo stawały się nieużywalne. Pozdrawiam Bartek From sir_Misiek w o2.pl Mon Feb 22 10:54:44 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Mon, 22 Feb 2016 10:54:44 +0100 Subject: mdadm - nie moge dodac dysku Message-ID: Wymieniłem dysk w macierzy. Niestety nie mogę go dodać ;-/ -bash-4.3# lsof | grep sda multipath 3426 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3428 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3430 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3431 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3440 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3441 root 4r BLK 8,0 0t0 6147 /dev/sda multipath 3426 3442 root 4r BLK 8,0 0t0 6147 /dev/sda -bash-4.3# mdadm --manage /dev/md1 --add /dev/sda1 mdadm: Cannot open /dev/sda1: Device or resource busy -bash-4.3# /etc/init.d/multipathd stop Zatrzymywanie usługi multipath daemon............................................................................ [ ZROBIONE ] -bash-4.3# lsof | grep sda -bash-4.3# mdadm --manage /dev/md1 --add /dev/sda1 mdadm: Cannot open /dev/sda1: Device or resource busy -bash-4.3# cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] [raid1] md4 : active raid5 sdb4[1] sdc4[3] 3265775616 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [_UU] md3 : active raid5 sdb3[1] sdc3[3] 2343751680 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [_UU] md1 : active raid1 sdb1[1] sdc1[2] 497856 blocks [3/2] [_UU] md2 : active raid5 sdb2[1] sdc2[3] 250000384 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [_UU] unused devices: From josiecki w silvercube.pl Thu Feb 25 16:13:39 2016 From: josiecki w silvercube.pl (Jacek Osiecki) Date: Thu, 25 Feb 2016 16:13:39 +0100 Subject: =?utf-8?Q?Nie_ma_ju=C5=BC_rescuecd=3F?= Message-ID: <2D6FFAE9-E061-40F5-AEF8-8185170D208E@silvercube.pl> Witam, ostatnio kazałem komuś pobrać nasze rescuecd? i oops. Nie ma :( Tak przypadkiem padło, czy to umyślne działanie? Pozdrawiam, -- Jacek Osiecki josiecki w silvercube.pl Silvercube s.c. ul. Makuszynskiego 4 31-752 Kraków +48 (12) 684 21 00 From mateusz-lists w ant.gliwice.pl Thu Feb 25 16:25:09 2016 From: mateusz-lists w ant.gliwice.pl (Mateusz Korniak) Date: Thu, 25 Feb 2016 16:25:09 +0100 Subject: Nie ma =?UTF-8?B?anXFvA==?= rescuecd? In-Reply-To: <2D6FFAE9-E061-40F5-AEF8-8185170D208E@silvercube.pl> References: <2D6FFAE9-E061-40F5-AEF8-8185170D208E@silvercube.pl> Message-ID: <4857430.CvSPrUE2ZT@matkor-toshiba> On Thursday 25 February 2016 16:13:39 Jacek Osiecki wrote: > ostatnio kazałem komuś pobrać nasze rescuecd? i oops. Nie ma :( Ja brałem z: https://github.com/Jajcus/pld-new-rescue/releases -- Mateusz Korniak "(...) mam brata - poważny, domator, liczykrupa, hipokryta, pobożniś, krótko mówiąc - podpora społeczeństwa." Nikos Kazantzakis - "Grek Zorba" From sir_Misiek w o2.pl Fri Feb 26 09:25:48 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 09:25:48 +0100 Subject: vservers overlay problem Message-ID: Próbuję uruchomić Dockera na vserverze. Niestety. bash-4.3# docker ps FATA[0000] Get http:///var/run/docker.sock/v1.18/containers/json: dial unix /var/run/docker.sock: no such file or directory. Are you trying to connect to a TLS-enabled daemon without TLS? bash-4.3# docker -d ERRO[0000] 'overlay' not found as a supported filesystem on this host. Please ensure kernel is new enough and has overlay support loaded. WARN[0000] Graphdriver vfs selected. Your graphdriver directory /var/lib/docker already contains data managed by other graphdrivers: aufs INFO[0000] +job init_networkdriver() WARN[0000] Running modprobe bridge nf_nat failed with message: , error: exec: "modprobe": executable file not found in $PATH operation not permitted INFO[0000] -job init_networkdriver() = ERR (1) INFO[0000] +job serveapi(unix:///var/run/docker.sock) INFO[0000] Listening for HTTP on unix (/var/run/docker.sock) FATA[0000] Shutting down daemon due to errors: operation not permitted From sir_Misiek w o2.pl Fri Feb 26 11:43:17 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 11:43:17 +0100 Subject: jbd In-Reply-To: References: Message-ID: <56D02C45.4040301@o2.pl> A może ktoś wie gdzie się podziało jbd ?? geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel From arekm w maven.pl Fri Feb 26 11:49:37 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 26 Feb 2016 11:49:37 +0100 Subject: jbd In-Reply-To: <56D02C45.4040301@o2.pl> References: <56D02C45.4040301@o2.pl> Message-ID: <201602261149.38553.arekm@maven.pl> On Friday 26 of February 2016, lord_Niedzwiedz wrote: > A może ktoś wie gdzie się podziało jbd ?? > > geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel Nie ma bo nie potrzebne. Jest jbd2. -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From sir_Misiek w o2.pl Fri Feb 26 13:59:14 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 13:59:14 +0100 Subject: jbd In-Reply-To: <201602261149.38553.arekm@maven.pl> References: <56D02C45.4040301@o2.pl> <201602261149.38553.arekm@maven.pl> Message-ID: <56D04C22.2060303@o2.pl> >> A może ktoś wie gdzie się podziało jbd ?? >> >> geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel > Nie ma bo nie potrzebne. Jest jbd2. No to mi po aktualizacji kernela z 3.14, na 4.3 server nie wstaje. geninitrd: WARNING: Option 'resume device' not found in /etc/suspend.conf. Disabling suspend support. Co tam powinno być ??!! fstab, mdadm, lilo - bez zmian geninit - jbd zmieniłem na jbd2 From arekm w maven.pl Fri Feb 26 14:12:21 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 26 Feb 2016 14:12:21 +0100 Subject: jbd In-Reply-To: <56D04C22.2060303@o2.pl> References: <201602261149.38553.arekm@maven.pl> <56D04C22.2060303@o2.pl> Message-ID: <201602261412.21524.arekm@maven.pl> On Friday 26 of February 2016, lord_Niedzwiedz wrote: > >> A może ktoś wie gdzie się podziało jbd ?? > >> > >> geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel > > > > Nie ma bo nie potrzebne. Jest jbd2. > > No to mi po aktualizacji kernela z 3.14, na 4.3 server nie wstaje. > geninitrd: WARNING: Option 'resume device' not found in > /etc/suspend.conf. Disabling suspend support. > Co tam powinno być ??!! > fstab, mdadm, lilo - bez zmian > geninit - jbd zmieniłem na jbd2 Za mało danych podajesz. Np wynik z generowania initrd z opcją -v. Fstaba dla rootfsa itd. -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From sir_Misiek w o2.pl Fri Feb 26 14:43:18 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 14:43:18 +0100 Subject: jbd In-Reply-To: <201602261412.21524.arekm@maven.pl> References: <201602261149.38553.arekm@maven.pl> <56D04C22.2060303@o2.pl> <201602261412.21524.arekm@maven.pl> Message-ID: <56D05676.7060007@o2.pl> >>>> A może ktoś wie gdzie się podziało jbd ?? >>>> >>>> geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel >>> Nie ma bo nie potrzebne. Jest jbd2. >> No to mi po aktualizacji kernela z 3.14, na 4.3 server nie wstaje. >> geninitrd: WARNING: Option 'resume device' not found in >> /etc/suspend.conf. Disabling suspend support. >> Co tam powinno być ??!! >> fstab, mdadm, lilo - bez zmian >> geninit - jbd zmieniłem na jbd2 > Za mało danych podajesz. Np wynik z generowania initrd z opcją -v. Fstaba dla > rootfsa itd. cat /etc/fstab /dev/md1 /boot ext4 defaults 1 1 /dev/md2 / ext4 defaults 0 0 #/dev/md1 / ext4 defaults 0 0 /dev/md3 /vservers ext4 defaults 0 2 /dev/md4 swap swap defaults 0 0 cat /etc/mdadm ARRAY /dev/md1 devices=/dev/sda1,/dev/sdb1,/dev/sdc1,/dev/sdd1 #ARRAY /dev/md2 devices=/dev/sda2,/dev/sdb2,/dev/sdc2,/dev/sdd2 ARRAY /dev/md3 devices=/dev/sda3,/dev/sdb3,/dev/sdc3,/dev/sdd3 ARRAY /dev/md4 devices=/dev/sda4,/dev/sdb4,/dev/sdc4,/dev/sdd4 cat /etc/sysconfig/geninitrd PROBESCSI=yes PROBEIDE=yes PROBERAID=yes BASICMODULES="sg dm_mod igb dca ahci libahci libata pata_atiixp ahci libahci scsi_mod tg3 jbd2 ips ide_core ide_gd_mod cdrom crc_itu_t ide_cd_mod evdev joydev evdev hid_generic usbhid hid igb ptp pps_core dca ehci_pci ehci_hcd usbcore usb_common" PREMODS="scsi_transport_sas libsas isci raid_class scsi_mod ext4 mbcache jbd2 crc16 raid1 md_mod raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx scsi_transport_iscsi libata libsas sd_mod sr_mod loop crc_t10dif igb tg3 " #COMPRESS=yes INITRDFS=ext2 ## Use udev to create /dev? USE_UDEV=yes ## Should udev make device nodes for staticly linked devices as well? #PROBSTATICMODULES=yes ## Use suspend to disk? ## Conflicts with USE_TUXONICE USE_SUSPEND=yes ## Do install software tuxonice modules? ## Conflicts with USE_SUSPEND ## Formerly Suspend2 #USE_TUXONICE=no USE_TUXONICE=yes # ver=4.3.3-1 # cd /boot # geninitrd -v -f initrd-$ver.gz $ver; sync geninitrd: # geninitrd 12757 geninitrd: find_tool: found /usr/lib64/initrd/busybox geninitrd: find_tool: found /sbin/mdassemble geninitrd: find_tool: found /sbin/mdadm geninitrd: find_tool: found /sbin/blkid geninitrd: find_tool: found /sbin/udevd geninitrd: find_tool: found /bin/udevadm geninitrd: WARNING: Tuxonice and mainline suspend are exclusive! geninitrd: find_tool: found /usr/lib64/suspend/resume geninitrd: WARNING: Option 'resume device' not found in /etc/suspend.conf. Disabling suspend support. geninitrd: Finding USB keyboard modules geninitrd: Found USB Keyboard: American Megatrends Inc. Virtual Keyboard and Mouse geninitrd: Found USB Keyboard: Logitech USB Keyboard geninitrd: Finding SATA modules (class=0x0106) geninitrd: Using /dev/md2 as device for rootfs geninitrd: Finding modules for device path /dev/md2 geninitrd: Finding RAID details using mdadm for rootdev=/dev/md2 geninitrd: md: found rootdev=/dev/md2 on device /dev/md2 with devices list /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 geninitrd: Finding modules for device path /dev/sda2 geninitrd: Finding SCSI modules using scsi_hostadapter geninitrd: Finding modules for device path /dev/sdb2 geninitrd: Finding SCSI modules using scsi_hostadapter geninitrd: Finding modules for device path /dev/sdc2 geninitrd: Finding SCSI modules using scsi_hostadapter geninitrd: Finding modules for device path /dev/sdd2 geninitrd: Finding SCSI modules using scsi_hostadapter geninitrd: Building initrd... geninitrd: + cp /usr/lib64/initrd/busybox DESTDIR/bin/busybox geninitrd: Loading font /lib/kbd/consolefonts/lat2u-16.psfu.gz geninitrd: Loading module [scsi_mod] with options [scan=sync ] geninitrd: Loading module [scsi_transport_sas] geninitrd: Loading module [libata] geninitrd: Loading module [libsas] geninitrd: Loading module [isci] geninitrd: Adding Firmwares (isci/isci_firmware.bin) to initrd for module isci geninitrd: + cp /lib/firmware/isci/isci_firmware.bin DESTDIR/lib/firmware/isci/isci_firmware.bin geninitrd: Loading module [raid_class] geninitrd: Loading module [jbd2] geninitrd: Loading module [mbcache] geninitrd: Loading module [crc16] geninitrd: Loading module [ext4] geninitrd: Loading module [md-mod] geninitrd: Loading module [raid1] geninitrd: Loading module [raid6_pq] geninitrd: Loading module [async_tx] geninitrd: Loading module [xor] geninitrd: Loading module [async_xor] geninitrd: Loading module [async_pq] geninitrd: Loading module [async_memcpy] geninitrd: Loading module [async_raid6_recov] geninitrd: Loading module [raid456] geninitrd: Loading module [scsi_transport_iscsi] geninitrd: Loading module [sd_mod] geninitrd: Loading module [cdrom] geninitrd: Loading module [sr_mod] geninitrd: Loading module [loop] geninitrd: Loading module [i2c-core] geninitrd: Loading module [i2c-algo-bit] geninitrd: Loading module [dca] geninitrd: Loading module [pps_core] geninitrd: Loading module [ptp] geninitrd: Loading module [hwmon] geninitrd: Loading module [igb] geninitrd: Loading module [tg3] geninitrd: Adding Firmwares (tigon/tg3_tso5.bin) to initrd for module tg3 geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3_tso5.bin DESTDIR/lib/firmware/tigon/tg3_tso5.bin geninitrd: Adding Firmwares (tigon/tg3_tso.bin) to initrd for module tg3 geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3_tso.bin DESTDIR/lib/firmware/tigon/tg3_tso.bin geninitrd: Adding Firmwares (tigon/tg3.bin) to initrd for module tg3 geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3.bin DESTDIR/lib/firmware/tigon/tg3.bin geninitrd: Loading module [usb-common] geninitrd: Loading module [usbcore] geninitrd: Loading module [ehci-hcd] geninitrd: Loading module [ehci-pci] geninitrd: Loading module [hid] geninitrd: Loading module [usbhid] geninitrd: Loading module [libahci] geninitrd: Loading module [ahci] geninitrd: Loading module [sg] geninitrd: Loading module [dm-mod] geninitrd: Loading module [pata_atiixp] geninitrd: Loading module [ips] geninitrd: Loading module [ide-core] geninitrd: Loading module [ide-gd_mod] geninitrd: Loading module [crc-itu-t] geninitrd: Loading module [ide-cd_mod] geninitrd: Loading module [evdev] geninitrd: Loading module [joydev] geninitrd: Loading module [hid-generic] geninitrd: Setting up udev... geninitrd: + cp /sbin/udevd DESTDIR/sbin/udevd geninitrd: + cp /lib64/ld-linux-x86-64.so.2 DESTDIR/lib64 geninitrd: + cp /lib64/libacl.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libattr.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libc.so.6 DESTDIR/lib64 geninitrd: + cp /lib64/libblkid.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libuuid.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libdl.so.2 DESTDIR/lib64 geninitrd: + cp /lib64/libkmod.so.2 DESTDIR/lib64 geninitrd: + cp /lib64/liblzma.so.5 DESTDIR/lib64 geninitrd: + cp /lib64/libpthread.so.0 DESTDIR/lib64 geninitrd: + cp /lib64/libz.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libpcre.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/librt.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libselinux.so.1 DESTDIR/lib64 geninitrd: + cp /bin/udevadm DESTDIR/sbin/udevadm geninitrd: + cp /etc/udev/udev.conf DESTDIR/etc/udev/udev.conf geninitrd: + cp /lib/udev/rules.d/50-udev-default.rules DESTDIR/lib/udev/rules.d/50-udev-default.rules geninitrd: + cp /lib/udev/rules.d/60-persistent-storage.rules DESTDIR/lib/udev/rules.d/60-persistent-storage.rules geninitrd: + cp /lib/udev/rules.d/80-drivers.rules DESTDIR/lib/udev/rules.d/80-drivers.rules geninitrd: + cp /lib/udev/rules.d/10-dm.rules DESTDIR/lib/udev/rules.d/10-dm.rules geninitrd: + cp /lib/udev/rules.d/11-dm-lvm.rules DESTDIR/lib/udev/rules.d/11-dm-lvm.rules geninitrd: + cp /lib/udev/rules.d/13-dm-disk.rules DESTDIR/lib/udev/rules.d/13-dm-disk.rules geninitrd: + cp /lib/udev/rules.d/95-dm-notify.rules DESTDIR/lib/udev/rules.d/95-dm-notify.rules geninitrd: + cp /lib/geninitrd/udev-rules/01-ignore.rules DESTDIR/lib/udev/rules.d/01-ignore.rules geninitrd: + cp /lib/geninitrd/udev-rules/59-persistent-storage.rules DESTDIR/lib/udev/rules.d/59-persistent-storage.rules geninitrd: + cp /lib/geninitrd/udev-rules/61-persistent-storage.rules DESTDIR/lib/udev/rules.d/61-persistent-storage.rules geninitrd: + cp /lib/geninitrd/udev-rules/11-dm.rules DESTDIR/lib/udev/rules.d/11-dm.rules geninitrd: + cp /etc/nsswitch.conf DESTDIR/etc/nsswitch.conf geninitrd: + cp /lib64/libnss_files-2.22.so /lib64/libnss_files.so.2 DESTDIR/lib64/ geninitrd: + cp /sbin/dmsetup DESTDIR/sbin/dmsetup geninitrd: + cp /lib64/libdevmapper.so.1.02 DESTDIR/lib64 geninitrd: + cp /lib64/libm.so.6 DESTDIR/lib64 geninitrd: + cp /lib64/libsepol.so.1 DESTDIR/lib64 geninitrd: + cp /lib64/libudev.so.1 DESTDIR/lib64 geninitrd: Adding BLKID support to initrd geninitrd: + cp /sbin/blkid DESTDIR/bin/blkid geninitrd: Setting up mdadm... geninitrd: + cp /sbin/mdassemble DESTDIR/bin/mdassemble geninitrd: Setting up array (/dev/md2 = /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2) geninitrd: + cp /dev/sda2 DESTDIR/dev/sda2 geninitrd: + cp /dev/sdb2 DESTDIR/dev/sdb2 geninitrd: + cp /dev/sdc2 DESTDIR/dev/sdc2 geninitrd: + cp /dev/sdd2 DESTDIR/dev/sdd2 geninitrd: + cp /dev/md2 DESTDIR/dev/md2 geninitrd: Adding BLKID support to initrd geninitrd: + cp /sbin/blkid DESTDIR/bin/blkid geninitrd: Adding rootfs finding based on kernel cmdline root= option support. geninitrd: image size: 13312 KiB (/root/tmp/initrd.zoGUJz) geninitrd: Creating ext2 image /root/tmp/initrd.img-SsK5f1 geninitrd: finding compressor: lzo gzip xz lzma bzip2 (via yes) geninitrd: Compressing initrd-4.3.3-1.gz with gzip LSPCI 00:00.0 Host bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 DMI2 (rev 04) 00:01.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1a (rev 04) 00:01.1 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 1b (rev 04) 00:02.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 2a (rev 04) 00:03.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 3a (rev 04) 00:04.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 0 (rev 04) 00:04.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 1 (rev 04) 00:04.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 2 (rev 04) 00:04.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 3 (rev 04) 00:04.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 4 (rev 04) 00:04.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 5 (rev 04) 00:04.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 6 (rev 04) 00:04.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 7 (rev 04) 00:05.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 VTd/Memory Map/Misc (rev 04) 00:05.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IIO RAS (rev 04) 00:05.4 PIC: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC (rev 04) 00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port (rev 06) 00:16.0 Communication controller: Intel Corporation C600/X79 series chipset MEI Controller #1 (rev 05) 00:16.1 Communication controller: Intel Corporation C600/X79 series chipset MEI Controller #2 (rev 05) 00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 (rev 06) 00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 (rev b6) 00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 8 (rev b6) 00:1d.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation C600/X79 series chipset Thermal Management Controller (rev 06) 02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 02:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 06:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port SATA Storage Control Unit (rev 06) 08:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] 09:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] 09:01.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] 0a:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe-PCI Bridge [PPB] 0b:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. G200eR2 7f:08.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Link 0 (rev 04) 7f:09.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Link 1 (rev 04) 7f:0a.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 0 (rev 04) 7f:0a.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 1 (rev 04) 7f:0a.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 2 (rev 04) 7f:0a.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 3 (rev 04) 7f:0b.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 UBOX Registers (rev 04) 7f:0b.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 UBOX Registers (rev 04) 7f:0c.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) 7f:0c.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) 7f:0d.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) 7f:0d.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) 7f:0e.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Home Agent 0 (rev 04) 7f:0e.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Home Agent 0 (rev 04) 7f:0f.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Target Address/Thermal Registers (rev 04) 7f:0f.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 RAS Registers (rev 04) 7f:0f.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) 7f:0f.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) 7f:0f.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) 7f:0f.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) 7f:10.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 0 (rev 04) 7f:10.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 1 (rev 04) 7f:10.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 0 (rev 04) 7f:10.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 1 (rev 04) 7f:10.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 2 (rev 04) 7f:10.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 3 (rev 04) 7f:10.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 2 (rev 04) 7f:10.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 3 (rev 04) 7f:13.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 R2PCIe (rev 04) 7f:13.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 R2PCIe (rev 04) 7f:13.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Ring Registers (rev 04) 7f:13.5 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Ring Performance Ring Monitoring (rev 04) 7f:16.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 System Address Decoder (rev 04) 7f:16.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Broadcast Registers (rev 04) 7f:16.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Broadcast Registers (rev 04) 80:02.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI Express Root Port 2a (rev 04) 80:04.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 0 (rev 04) 80:04.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 1 (rev 04) 80:04.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 2 (rev 04) 80:04.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 3 (rev 04) 80:04.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 4 (rev 04) 80:04.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 5 (rev 04) 80:04.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 6 (rev 04) 80:04.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Crystal Beach DMA Channel 7 (rev 04) 80:05.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 VTd/Memory Map/Misc (rev 04) 80:05.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IIO RAS (rev 04) 80:05.4 PIC: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC (rev 04) ff:08.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Link 0 (rev 04) ff:09.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Link 1 (rev 04) ff:0a.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 0 (rev 04) ff:0a.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 1 (rev 04) ff:0a.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 2 (rev 04) ff:0a.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Power Control Unit 3 (rev 04) ff:0b.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 UBOX Registers (rev 04) ff:0b.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 UBOX Registers (rev 04) ff:0c.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) ff:0c.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) ff:0d.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) ff:0d.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Unicast Registers (rev 04) ff:0e.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Home Agent 0 (rev 04) ff:0e.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Home Agent 0 (rev 04) ff:0f.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Target Address/Thermal Registers (rev 04) ff:0f.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 RAS Registers (rev 04) ff:0f.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) ff:0f.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) ff:0f.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) ff:0f.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder Registers (rev 04) ff:10.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 0 (rev 04) ff:10.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 1 (rev 04) ff:10.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 0 (rev 04) ff:10.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 1 (rev 04) ff:10.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 2 (rev 04) ff:10.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 3 (rev 04) ff:10.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 2 (rev 04) ff:10.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 3 (rev 04) ff:13.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 R2PCIe (rev 04) ff:13.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 R2PCIe (rev 04) ff:13.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Ring Registers (rev 04) ff:13.5 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 QPI Ring Performance Ring Monitoring (rev 04) ff:16.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 System Address Decoder (rev 04) ff:16.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Broadcast Registers (rev 04) ff:16.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 Broadcast Registers (rev 04) From sir_Misiek w o2.pl Fri Feb 26 14:56:15 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 14:56:15 +0100 Subject: jbd In-Reply-To: <56D05676.7060007@o2.pl> References: <201602261149.38553.arekm@maven.pl> <56D04C22.2060303@o2.pl> <201602261412.21524.arekm@maven.pl> <56D05676.7060007@o2.pl> Message-ID: <56D0597F.8090707@o2.pl> I jeszcze lilo.conf # Misiek # Wystarczy tylko ten md2 image=/boot/vmlinuz label=pld_md2 root=/dev/md2 initrd=/boot/initrd image=/boot/vmlinuz label=pld root=/dev/md1 initrd=/boot/initrd Stare jajo mi na takich ustawieniach chodziło ;-/ >>>>> A może ktoś wie gdzie się podziało jbd ?? >>>>> >>>>> geninitrd: ERROR: jbd: module not found for 4.3.3-1 kernel >>>> Nie ma bo nie potrzebne. Jest jbd2. >>> No to mi po aktualizacji kernela z 3.14, na 4.3 server nie wstaje. >>> geninitrd: WARNING: Option 'resume device' not found in >>> /etc/suspend.conf. Disabling suspend support. >>> Co tam powinno być ??!! >>> fstab, mdadm, lilo - bez zmian >>> geninit - jbd zmieniłem na jbd2 >> Za mało danych podajesz. Np wynik z generowania initrd z opcją -v. Fstaba dla >> rootfsa itd. > cat > /etc/fstab > > /dev/md1 /boot ext4 defaults 1 1 > /dev/md2 / ext4 defaults 0 0 > #/dev/md1 / ext4 defaults 0 0 > > /dev/md3 /vservers ext4 defaults 0 2 > /dev/md4 swap swap defaults 0 0 > > cat /etc/mdadm > ARRAY /dev/md1 devices=/dev/sda1,/dev/sdb1,/dev/sdc1,/dev/sdd1 > #ARRAY /dev/md2 devices=/dev/sda2,/dev/sdb2,/dev/sdc2,/dev/sdd2 > ARRAY /dev/md3 devices=/dev/sda3,/dev/sdb3,/dev/sdc3,/dev/sdd3 > ARRAY /dev/md4 devices=/dev/sda4,/dev/sdb4,/dev/sdc4,/dev/sdd4 > > cat > /etc/sysconfig/geninitrd > > PROBESCSI=yes > PROBEIDE=yes > PROBERAID=yes > > BASICMODULES="sg dm_mod igb dca ahci libahci libata pata_atiixp ahci > libahci scsi_mod tg3 jbd2 ips ide_core ide_gd_mod cdrom crc_itu_t > ide_cd_mod evdev joydev evdev hid_generic usbhid hid igb ptp pps_core > dca ehci_pci ehci_hcd usbcore usb_common" > > PREMODS="scsi_transport_sas libsas isci raid_class scsi_mod ext4 mbcache > jbd2 crc16 raid1 md_mod raid456 async_raid6_recov async_pq raid6_pq > async_xor xor async_memcpy async_tx scsi_transport_iscsi libata libsas > sd_mod sr_mod loop crc_t10dif igb tg3 " > > #COMPRESS=yes > > INITRDFS=ext2 > > ## Use udev to create /dev? > USE_UDEV=yes > > ## Should udev make device nodes for staticly linked devices as well? > #PROBSTATICMODULES=yes > > ## Use suspend to disk? > ## Conflicts with USE_TUXONICE > USE_SUSPEND=yes > > ## Do install software tuxonice modules? > ## Conflicts with USE_SUSPEND > ## Formerly Suspend2 > #USE_TUXONICE=no > USE_TUXONICE=yes > > > # ver=4.3.3-1 > # cd /boot > # geninitrd -v -f initrd-$ver.gz $ver; sync > geninitrd: # geninitrd 12757 > geninitrd: find_tool: found /usr/lib64/initrd/busybox > geninitrd: find_tool: found /sbin/mdassemble > geninitrd: find_tool: found /sbin/mdadm > geninitrd: find_tool: found /sbin/blkid > geninitrd: find_tool: found /sbin/udevd > geninitrd: find_tool: found /bin/udevadm > geninitrd: WARNING: Tuxonice and mainline suspend are exclusive! > geninitrd: find_tool: found /usr/lib64/suspend/resume > geninitrd: WARNING: Option 'resume device' not found in > /etc/suspend.conf. Disabling suspend support. > geninitrd: Finding USB keyboard modules > geninitrd: Found USB Keyboard: American Megatrends Inc. Virtual Keyboard > and Mouse > geninitrd: Found USB Keyboard: Logitech USB Keyboard > geninitrd: Finding SATA modules (class=0x0106) > geninitrd: Using /dev/md2 as device for rootfs > geninitrd: Finding modules for device path /dev/md2 > geninitrd: Finding RAID details using mdadm for rootdev=/dev/md2 > geninitrd: md: found rootdev=/dev/md2 on device /dev/md2 with devices > list /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 > geninitrd: Finding modules for device path /dev/sda2 > geninitrd: Finding SCSI modules using scsi_hostadapter > geninitrd: Finding modules for device path /dev/sdb2 > geninitrd: Finding SCSI modules using scsi_hostadapter > geninitrd: Finding modules for device path /dev/sdc2 > geninitrd: Finding SCSI modules using scsi_hostadapter > geninitrd: Finding modules for device path /dev/sdd2 > geninitrd: Finding SCSI modules using scsi_hostadapter > geninitrd: Building initrd... > geninitrd: + cp /usr/lib64/initrd/busybox DESTDIR/bin/busybox > geninitrd: Loading font /lib/kbd/consolefonts/lat2u-16.psfu.gz > geninitrd: Loading module [scsi_mod] with options [scan=sync ] > geninitrd: Loading module [scsi_transport_sas] > geninitrd: Loading module [libata] > geninitrd: Loading module [libsas] > geninitrd: Loading module [isci] > geninitrd: Adding Firmwares (isci/isci_firmware.bin) to initrd for > module isci > geninitrd: + cp /lib/firmware/isci/isci_firmware.bin > DESTDIR/lib/firmware/isci/isci_firmware.bin > geninitrd: Loading module [raid_class] > geninitrd: Loading module [jbd2] > geninitrd: Loading module [mbcache] > geninitrd: Loading module [crc16] > geninitrd: Loading module [ext4] > geninitrd: Loading module [md-mod] > geninitrd: Loading module [raid1] > geninitrd: Loading module [raid6_pq] > geninitrd: Loading module [async_tx] > geninitrd: Loading module [xor] > geninitrd: Loading module [async_xor] > geninitrd: Loading module [async_pq] > geninitrd: Loading module [async_memcpy] > geninitrd: Loading module [async_raid6_recov] > geninitrd: Loading module [raid456] > geninitrd: Loading module [scsi_transport_iscsi] > geninitrd: Loading module [sd_mod] > geninitrd: Loading module [cdrom] > geninitrd: Loading module [sr_mod] > geninitrd: Loading module [loop] > geninitrd: Loading module [i2c-core] > geninitrd: Loading module [i2c-algo-bit] > geninitrd: Loading module [dca] > geninitrd: Loading module [pps_core] > geninitrd: Loading module [ptp] > geninitrd: Loading module [hwmon] > geninitrd: Loading module [igb] > geninitrd: Loading module [tg3] > geninitrd: Adding Firmwares (tigon/tg3_tso5.bin) to initrd for module tg3 > geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3_tso5.bin > DESTDIR/lib/firmware/tigon/tg3_tso5.bin > geninitrd: Adding Firmwares (tigon/tg3_tso.bin) to initrd for module tg3 > geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3_tso.bin > DESTDIR/lib/firmware/tigon/tg3_tso.bin > geninitrd: Adding Firmwares (tigon/tg3.bin) to initrd for module tg3 > geninitrd: + cp /lib/firmware/4.3.3-1/tigon/tg3.bin > DESTDIR/lib/firmware/tigon/tg3.bin > geninitrd: Loading module [usb-common] > geninitrd: Loading module [usbcore] > geninitrd: Loading module [ehci-hcd] > geninitrd: Loading module [ehci-pci] > geninitrd: Loading module [hid] > geninitrd: Loading module [usbhid] > geninitrd: Loading module [libahci] > geninitrd: Loading module [ahci] > geninitrd: Loading module [sg] > geninitrd: Loading module [dm-mod] > geninitrd: Loading module [pata_atiixp] > geninitrd: Loading module [ips] > geninitrd: Loading module [ide-core] > geninitrd: Loading module [ide-gd_mod] > geninitrd: Loading module [crc-itu-t] > geninitrd: Loading module [ide-cd_mod] > geninitrd: Loading module [evdev] > geninitrd: Loading module [joydev] > geninitrd: Loading module [hid-generic] > geninitrd: Setting up udev... > geninitrd: + cp /sbin/udevd DESTDIR/sbin/udevd > geninitrd: + cp /lib64/ld-linux-x86-64.so.2 DESTDIR/lib64 > geninitrd: + cp /lib64/libacl.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libattr.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libc.so.6 DESTDIR/lib64 > geninitrd: + cp /lib64/libblkid.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libuuid.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libdl.so.2 DESTDIR/lib64 > geninitrd: + cp /lib64/libkmod.so.2 DESTDIR/lib64 > geninitrd: + cp /lib64/liblzma.so.5 DESTDIR/lib64 > geninitrd: + cp /lib64/libpthread.so.0 DESTDIR/lib64 > geninitrd: + cp /lib64/libz.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libpcre.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/librt.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libselinux.so.1 DESTDIR/lib64 > geninitrd: + cp /bin/udevadm DESTDIR/sbin/udevadm > geninitrd: + cp /etc/udev/udev.conf DESTDIR/etc/udev/udev.conf > geninitrd: + cp /lib/udev/rules.d/50-udev-default.rules > DESTDIR/lib/udev/rules.d/50-udev-default.rules > geninitrd: + cp /lib/udev/rules.d/60-persistent-storage.rules > DESTDIR/lib/udev/rules.d/60-persistent-storage.rules > geninitrd: + cp /lib/udev/rules.d/80-drivers.rules > DESTDIR/lib/udev/rules.d/80-drivers.rules > geninitrd: + cp /lib/udev/rules.d/10-dm.rules > DESTDIR/lib/udev/rules.d/10-dm.rules > geninitrd: + cp /lib/udev/rules.d/11-dm-lvm.rules > DESTDIR/lib/udev/rules.d/11-dm-lvm.rules > geninitrd: + cp /lib/udev/rules.d/13-dm-disk.rules > DESTDIR/lib/udev/rules.d/13-dm-disk.rules > geninitrd: + cp /lib/udev/rules.d/95-dm-notify.rules > DESTDIR/lib/udev/rules.d/95-dm-notify.rules > geninitrd: + cp /lib/geninitrd/udev-rules/01-ignore.rules > DESTDIR/lib/udev/rules.d/01-ignore.rules > geninitrd: + cp /lib/geninitrd/udev-rules/59-persistent-storage.rules > DESTDIR/lib/udev/rules.d/59-persistent-storage.rules > geninitrd: + cp /lib/geninitrd/udev-rules/61-persistent-storage.rules > DESTDIR/lib/udev/rules.d/61-persistent-storage.rules > geninitrd: + cp /lib/geninitrd/udev-rules/11-dm.rules > DESTDIR/lib/udev/rules.d/11-dm.rules > geninitrd: + cp /etc/nsswitch.conf DESTDIR/etc/nsswitch.conf > geninitrd: + cp /lib64/libnss_files-2.22.so /lib64/libnss_files.so.2 > DESTDIR/lib64/ > geninitrd: + cp /sbin/dmsetup DESTDIR/sbin/dmsetup > geninitrd: + cp /lib64/libdevmapper.so.1.02 DESTDIR/lib64 > geninitrd: + cp /lib64/libm.so.6 DESTDIR/lib64 > geninitrd: + cp /lib64/libsepol.so.1 DESTDIR/lib64 > geninitrd: + cp /lib64/libudev.so.1 DESTDIR/lib64 > geninitrd: Adding BLKID support to initrd > geninitrd: + cp /sbin/blkid DESTDIR/bin/blkid > geninitrd: Setting up mdadm... > geninitrd: + cp /sbin/mdassemble DESTDIR/bin/mdassemble > geninitrd: Setting up array (/dev/md2 = /dev/sda2 /dev/sdb2 /dev/sdc2 > /dev/sdd2) > geninitrd: + cp /dev/sda2 DESTDIR/dev/sda2 > geninitrd: + cp /dev/sdb2 DESTDIR/dev/sdb2 > geninitrd: + cp /dev/sdc2 DESTDIR/dev/sdc2 > geninitrd: + cp /dev/sdd2 DESTDIR/dev/sdd2 > geninitrd: + cp /dev/md2 DESTDIR/dev/md2 > geninitrd: Adding BLKID support to initrd > geninitrd: + cp /sbin/blkid DESTDIR/bin/blkid > geninitrd: Adding rootfs finding based on kernel cmdline root= option > support. > geninitrd: image size: 13312 KiB (/root/tmp/initrd.zoGUJz) > geninitrd: Creating ext2 image /root/tmp/initrd.img-SsK5f1 > geninitrd: finding compressor: lzo gzip xz lzma bzip2 (via yes) > geninitrd: Compressing initrd-4.3.3-1.gz with gzip > > > > > LSPCI > > 00:00.0 Host bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 > DMI2 (rev 04) > 00:01.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI > Express Root Port 1a (rev 04) > 00:01.1 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI > Express Root Port 1b (rev 04) > 00:02.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI > Express Root Port 2a (rev 04) > 00:03.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI > Express Root Port 3a (rev 04) > 00:04.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 0 (rev 04) > 00:04.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 1 (rev 04) > 00:04.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 2 (rev 04) > 00:04.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 3 (rev 04) > 00:04.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 4 (rev 04) > 00:04.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 5 (rev 04) > 00:04.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 6 (rev 04) > 00:04.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 7 (rev 04) > 00:05.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 VTd/Memory Map/Misc (rev 04) > 00:05.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 IIO RAS (rev 04) > 00:05.4 PIC: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC (rev 04) > 00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Virtual Root Port (rev 06) > 00:16.0 Communication controller: Intel Corporation C600/X79 series > chipset MEI Controller #1 (rev 05) > 00:16.1 Communication controller: Intel Corporation C600/X79 series > chipset MEI Controller #2 (rev 05) > 00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 > Enhanced Host Controller #2 (rev 06) > 00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 1 (rev b6) > 00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 8 (rev b6) > 00:1d.0 USB controller: Intel Corporation C600/X79 series chipset USB2 > Enhanced Host Controller #1 (rev 06) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) > 00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC > Controller (rev 06) > 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset > 6-Port SATA AHCI Controller (rev 06) > 00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host > Controller (rev 06) > 00:1f.6 Signal processing controller: Intel Corporation C600/X79 series > chipset Thermal Management Controller (rev 06) > 02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network > Connection (rev 01) > 02:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network > Connection (rev 01) > 06:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset > 4-Port SATA Storage Control Unit (rev 06) > 08:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] > 09:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] > 09:01.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe Switch [PS] > 0a:00.0 PCI bridge: Renesas Technology Corp. SH7757 PCIe-PCI Bridge [PPB] > 0b:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. G200eR2 > 7f:08.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Link 0 (rev 04) > 7f:09.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Link 1 (rev 04) > 7f:0a.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 0 (rev 04) > 7f:0a.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 1 (rev 04) > 7f:0a.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 2 (rev 04) > 7f:0a.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 3 (rev 04) > 7f:0b.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 UBOX Registers (rev 04) > 7f:0b.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 UBOX Registers (rev 04) > 7f:0c.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > 7f:0c.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > 7f:0d.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > 7f:0d.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > 7f:0e.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Home Agent 0 (rev 04) > 7f:0e.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 Home Agent 0 (rev 04) > 7f:0f.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Target Address/Thermal Registers (rev 04) > 7f:0f.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 RAS Registers (rev 04) > 7f:0f.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > 7f:0f.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > 7f:0f.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > 7f:0f.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > 7f:10.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 0 (rev 04) > 7f:10.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 1 (rev 04) > 7f:10.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 0 (rev 04) > 7f:10.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 1 (rev 04) > 7f:10.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 2 (rev 04) > 7f:10.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 3 (rev 04) > 7f:10.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 2 (rev 04) > 7f:10.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 3 (rev 04) > 7f:13.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 R2PCIe (rev 04) > 7f:13.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 R2PCIe (rev 04) > 7f:13.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Ring Registers (rev 04) > 7f:13.5 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 QPI Ring Performance Ring Monitoring (rev 04) > 7f:16.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 System Address Decoder (rev 04) > 7f:16.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Broadcast Registers (rev 04) > 7f:16.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Broadcast Registers (rev 04) > 80:02.0 PCI bridge: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 PCI > Express Root Port 2a (rev 04) > 80:04.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 0 (rev 04) > 80:04.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 1 (rev 04) > 80:04.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 2 (rev 04) > 80:04.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 3 (rev 04) > 80:04.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 4 (rev 04) > 80:04.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 5 (rev 04) > 80:04.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 6 (rev 04) > 80:04.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Crystal Beach DMA Channel 7 (rev 04) > 80:05.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 VTd/Memory Map/Misc (rev 04) > 80:05.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 IIO RAS (rev 04) > 80:05.4 PIC: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core i7 IOAPIC (rev 04) > ff:08.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Link 0 (rev 04) > ff:09.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Link 1 (rev 04) > ff:0a.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 0 (rev 04) > ff:0a.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 1 (rev 04) > ff:0a.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 2 (rev 04) > ff:0a.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Power Control Unit 3 (rev 04) > ff:0b.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 UBOX Registers (rev 04) > ff:0b.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 UBOX Registers (rev 04) > ff:0c.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > ff:0c.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > ff:0d.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > ff:0d.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Unicast Registers (rev 04) > ff:0e.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Home Agent 0 (rev 04) > ff:0e.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 Home Agent 0 (rev 04) > ff:0f.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Target Address/Thermal Registers (rev 04) > ff:0f.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 RAS Registers (rev 04) > ff:0f.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > ff:0f.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > ff:0f.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > ff:0f.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 0 Channel Target Address Decoder > Registers (rev 04) > ff:10.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 0 (rev 04) > ff:10.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 1 (rev 04) > ff:10.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 0 (rev 04) > ff:10.3 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 1 (rev 04) > ff:10.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 2 (rev 04) > ff:10.5 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 Thermal Control 3 (rev 04) > ff:10.6 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 2 (rev 04) > ff:10.7 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Integrated Memory Controller 1 Channel 0-3 ERROR Registers 3 (rev 04) > ff:13.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 R2PCIe (rev 04) > ff:13.1 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 R2PCIe (rev 04) > ff:13.4 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 QPI Ring Registers (rev 04) > ff:13.5 Performance counters: Intel Corporation Xeon E7 v2/Xeon E5 > v2/Core i7 QPI Ring Performance Ring Monitoring (rev 04) > ff:16.0 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 System Address Decoder (rev 04) > ff:16.1 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Broadcast Registers (rev 04) > ff:16.2 System peripheral: Intel Corporation Xeon E7 v2/Xeon E5 v2/Core > i7 Broadcast Registers (rev 04) > > > > > _______________________________________________ > pld-users-pl mailing list > pld-users-pl w lists.pld-linux.org > http://lists.pld-linux.org/mailman/listinfo/pld-users-pl > -- Pozdro lord_Niedzwiedz --------------- In security - do not assume anything From arekm w maven.pl Fri Feb 26 15:00:33 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Fri, 26 Feb 2016 15:00:33 +0100 Subject: jbd In-Reply-To: <56D0597F.8090707@o2.pl> References: <56D05676.7060007@o2.pl> <56D0597F.8090707@o2.pl> Message-ID: <201602261500.34069.arekm@maven.pl> On Friday 26 of February 2016, lord_Niedzwiedz wrote: > I jeszcze lilo.conf > # Misiek > # Wystarczy tylko ten md2 > image=/boot/vmlinuz > label=pld_md2 > root=/dev/md2 > initrd=/boot/initrd > image=/boot/vmlinuz > label=pld > root=/dev/md1 > initrd=/boot/initrd > > Stare jajo mi na takich ustawieniach chodziło ;-/ Dużo tego się ładuje... i cięższy przypadek więc nie zgadnę :( Loga z bootowania z konsoli szeregowej da radę zgrać? Jeszcze z opcja przy bootowaniu debuginitrd -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From sir_Misiek w o2.pl Fri Feb 26 15:18:17 2016 From: sir_Misiek w o2.pl (lord_Niedzwiedz) Date: Fri, 26 Feb 2016 15:18:17 +0100 Subject: jbd In-Reply-To: <201602261500.34069.arekm@maven.pl> References: <56D05676.7060007@o2.pl> <56D0597F.8090707@o2.pl> <201602261500.34069.arekm@maven.pl> Message-ID: <56D05EA9.207@o2.pl> > Dużo tego się ładuje... i cięższy przypadek więc nie zgadnę :( > > Loga z bootowania z konsoli szeregowej da radę zgrać? Jeszcze z opcja przy > bootowaniu debuginitrd A jak to się robi ? From mateusz-lists w ant.gliwice.pl Fri Feb 26 16:10:56 2016 From: mateusz-lists w ant.gliwice.pl (Mateusz Korniak) Date: Fri, 26 Feb 2016 16:10:56 +0100 Subject: jbd In-Reply-To: <56D0597F.8090707@o2.pl> References: <56D05676.7060007@o2.pl> <56D0597F.8090707@o2.pl> Message-ID: <2300026.RVdBPzYGjP@matkor-toshiba> On Friday 26 February 2016 14:56:15 lord_Niedzwiedz wrote: A po co Ci tyle rzeczy w initrd ? / i /boot masz na raidzie na zwykłych dyskach SATA? > > cat > > /etc/sysconfig/geninitrd > > > > PROBESCSI=yes > > PROBEIDE=yes > > PROBERAID=yes Po co to ? > > BASICMODULES="sg dm_mod igb dca ahci libahci libata pata_atiixp ahci > > libahci scsi_mod tg3 jbd2 ips ide_core ide_gd_mod cdrom crc_itu_t > > ide_cd_mod evdev joydev evdev hid_generic usbhid hid igb ptp pps_core > > dca ehci_pci ehci_hcd usbcore usb_common" > > > > PREMODS="scsi_transport_sas libsas isci raid_class scsi_mod ext4 mbcache > > jbd2 crc16 raid1 md_mod raid456 async_raid6_recov async_pq raid6_pq > > async_xor xor async_memcpy async_tx scsi_transport_iscsi libata libsas > > sd_mod sr_mod loop crc_t10dif igb tg3 " Po co tyle ? Kontroler do dysków (ahci) powinien wystarczyć + ewentualnie moduł do raidów. > > INITRDFS=ext2 Nie może zostać defaultowo? (to dla mnie pierwszy podejrzany czemu nie wstaje) > > USE_SUSPEND=yes no przecież to serwer chyba ? > > USE_TUXONICE=yes no j.w. -- Mateusz Korniak "(...) mam brata - poważny, domator, liczykrupa, hipokryta, pobożniś, krótko mówiąc - podpora społeczeństwa." Nikos Kazantzakis - "Grek Zorba" From pld w sojka.co Sat Feb 27 00:44:50 2016 From: pld w sojka.co (=?UTF-8?Q?Grzegorz_S=c3=b3jka?=) Date: Sat, 27 Feb 2016 00:44:50 +0100 Subject: X'y Message-ID: <56D0E372.2030700@sojka.co> Witam serdecznie, Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? -- Pozdrawiam Grzesiek Wysłane z kompa wolnego od wirusów Billa Gatesa. From masko w ipipan.waw.pl Sat Feb 27 07:52:33 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Sat, 27 Feb 2016 07:52:33 +0100 Subject: X'y In-Reply-To: <56D0E372.2030700@sojka.co> References: <56D0E372.2030700@sojka.co> Message-ID: <3648435.Lur4JS73f2@laptok> Dnia sobota, 27 lutego 2016 00:44:50 Grzegorz Sójka pisze: > Witam serdecznie, > > Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? > Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? Ale jaki problem? Przecież działa? -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana" From sir_Misiek w o2.pl Sat Feb 27 08:15:40 2016 From: sir_Misiek w o2.pl (lord Niedzwiedz) Date: Sat, 27 Feb 2016 08:15:40 +0100 Subject: jbd In-Reply-To: <2300026.RVdBPzYGjP@matkor-toshiba> References: <56D05676.7060007@o2.pl> <56D0597F.8090707@o2.pl> <2300026.RVdBPzYGjP@matkor-toshiba> Message-ID: <56D14D1C.6060509@o2.pl> > On Friday 26 February 2016 14:56:15 lord_Niedzwiedz wrote: > > A po co Ci tyle rzeczy w initrd ? > / i /boot masz na raidzie na zwykłych dyskach SATA? Po to tyle rzeczy, że może w końcu w coś trafię ;-/ Dyski sata ssd. Boot na raid1 , / na raid5 , oba ext4 (na 3.14 z vserverami chodziło). >> cat >> /etc/sysconfig/geninitrd >> >> PROBESCSI=yes >> PROBEIDE=yes >> PROBERAID=yes > Po co to ? Bo może pomoże. >> BASICMODULES="sg dm_mod igb dca ahci libahci libata pata_atiixp ahci >> libahci scsi_mod tg3 jbd2 ips ide_core ide_gd_mod cdrom crc_itu_t >> ide_cd_mod evdev joydev evdev hid_generic usbhid hid igb ptp pps_core >> dca ehci_pci ehci_hcd usbcore usb_common" >> >> PREMODS="scsi_transport_sas libsas isci raid_class scsi_mod ext4 mbcache >> jbd2 crc16 raid1 md_mod raid456 async_raid6_recov async_pq raid6_pq >> async_xor xor async_memcpy async_tx scsi_transport_iscsi libata libsas >> sd_mod sr_mod loop crc_t10dif igb tg3 " > Po co tyle ? > Kontroler do dysków (ahci) powinien wystarczyć + ewentualnie moduł do raidów. i ext4, i kontroler do raida. Jak widać nie wystarcza. > INITRDFS=ext2 > Nie może zostać defaultowo? > (to dla mnie pierwszy podejrzany czemu nie wstaje) > >>> USE_SUSPEND=yes > no > przecież to serwer chyba ? > >>> USE_TUXONICE=yes > no > j.w. Do tej porty tylko dzięki use_suspend przy obecnej konfiguracji wstawało ;-/ From sir_Misiek w o2.pl Sat Feb 27 08:35:16 2016 From: sir_Misiek w o2.pl (lord Niedzwiedz) Date: Sat, 27 Feb 2016 08:35:16 +0100 Subject: X'y In-Reply-To: <3648435.Lur4JS73f2@laptok> References: <56D0E372.2030700@sojka.co> <3648435.Lur4JS73f2@laptok> Message-ID: <56D151B4.4000805@o2.pl> >> Witam serdecznie, >> >> Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? >> Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? > Ale jaki problem? Przecież działa? Nie wiem komu. Ja nie aktualizuje (nie mam czasu na zabawę). Po ostatniej aktualizacji wywaliło mi się na wszystkich różnych (intel, amd, ...). maszynach jednocześnie. Obecnie mam stan taki. poldek:/all-avail> upgrade * -t I libevdev-1.4.6-1.x86_64 xorg-driver-input-evdev-2.10.1-1.x86_64 xorg-driver-input-keyboard-1.8.1-2.x86_64 I xorg-driver-input-mouse-1.9.1-3.x86_64 xorg-driver-input-synaptics-1.8.3-2.x86_64 I xorg-driver-video-i740-1.3.5-2.x86_64 xorg-driver-video-intel-2.99.917-4.x86_64 I xorg-driver-video-vesa-2.3.4-2.x86_64 xorg-xserver-libglx-1.18.0-2.x86_64 xorg-xserver-server-1.18.0-2.x86_64 R libevdev-1.4.5-1.x86_64 xorg-driver-input-evdev-2.10.0-2.x86_64 xorg-driver-input-keyboard-1.8.1-1.x86_64 R xorg-driver-input-mouse-1.9.1-2.x86_64 xorg-driver-input-synaptics-1.8.3-1.x86_64 R xorg-driver-video-i740-1.3.5-1.x86_64 xorg-driver-video-intel-2.99.917-2.x86_64 R xorg-driver-video-vesa-2.3.4-1.x86_64 xorg-xserver-libglx-1.17.4-1.x86_64 xorg-xserver-server-1.17.4-1.x86_64 I nie dotykam bo mi wywala i nie wstają hosty. From pld w sojka.co Sat Feb 27 10:25:34 2016 From: pld w sojka.co (=?UTF-8?Q?Grzesiek_S=c3=b3jka?=) Date: Sat, 27 Feb 2016 10:25:34 +0100 Subject: X'y In-Reply-To: <3648435.Lur4JS73f2@laptok> References: <56D0E372.2030700@sojka.co> <3648435.Lur4JS73f2@laptok> Message-ID: <56D16B8E.2070404@sojka.co> On 02/27/16 07:52, Łukasz Maśko wrote: > Dnia sobota, 27 lutego 2016 00:44:50 Grzegorz Sójka pisze: >> Witam serdecznie, >> >> Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? >> Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? > > Ale jaki problem? Przecież działa? Ty masz w ogóle coś na C2D? Jeśli tak i działa to jaka grafika? -- Pozdriówka Grzesiek Najlepszym przyjacielem człowieka wcale nie jest pies a .. ... kolonia drożdży. Duża kolonia => mnóstwo (% ;) ) radości. From masko w ipipan.waw.pl Sat Feb 27 10:32:42 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Sat, 27 Feb 2016 10:32:42 +0100 Subject: X'y In-Reply-To: <56D16B8E.2070404@sojka.co> References: <56D0E372.2030700@sojka.co> <3648435.Lur4JS73f2@laptok> <56D16B8E.2070404@sojka.co> Message-ID: <1975377.TCQzTggTx4@laptok> Dnia sobota, 27 lutego 2016 10:25:34 Grzesiek Sójka pisze: [...] > > Ale jaki problem? Przecież działa? > > Ty masz w ogóle coś na C2D? Jeśli tak i działa to jaka grafika? No mój poprzedni laptop jest na C2D. I chodzi na wbudowanej grafice Intela. -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana" From =?UTF-8?Q?uzi18 w o2.pl?= Sun Feb 28 12:56:49 2016 From: =?UTF-8?Q?uzi18 w o2.pl?= (=?UTF-8?Q?uzi18 w o2.pl?=) Date: Sun, 28 Feb 2016 12:56:49 +0100 Subject: =?UTF-8?Q?Re:_X'=3By?= Message-ID: <13fbf1fc.3196230a.56d2e081.21af8@o2.pl> Dnia 27 lutego 2016 0:44 Grzegorz Sójka napisał(a): > Witam serdecznie, > > Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? > Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? > > To moze zacznij od jakiegos logu z xow? Wersje pakietow itp. ... U mnie tez dziala. Bartek From pld w sojka.co Sun Feb 28 17:45:57 2016 From: pld w sojka.co (=?UTF-8?Q?Grzegorz_S=c3=b3jka?=) Date: Sun, 28 Feb 2016 17:45:57 +0100 Subject: X'y In-Reply-To: <13fbf1fc.3196230a.56d2e081.21af8@o2.pl> References: <13fbf1fc.3196230a.56d2e081.21af8@o2.pl> Message-ID: <56D32445.1070704@sojka.co> Znalazłem! Jakimś cudem dałem suid i guid do /usr/bin/Xorg zamiast do /usr/lib64/xorg/Xorg. Teraz działa. -- Pozdrawiam Grzesiek Wysłane z kompa wolnego od wirusów Billa Gatesa. From arekm w maven.pl Sun Feb 28 18:47:55 2016 From: arekm w maven.pl (Arkadiusz =?iso-8859-2?q?Mi=B6kiewicz?=) Date: Sun, 28 Feb 2016 18:47:55 +0100 Subject: X'y In-Reply-To: <56D32445.1070704@sojka.co> References: <13fbf1fc.3196230a.56d2e081.21af8@o2.pl> <56D32445.1070704@sojka.co> Message-ID: <201602281847.55377.arekm@maven.pl> On Sunday 28 of February 2016, Grzegorz Sójka wrote: > Znalazłem! Jakimś cudem dałem suid i guid do /usr/bin/Xorg zamiast do > /usr/lib64/xorg/Xorg. Teraz działa. Nie wystarczało w /etc/X11/Xwrapper.config włączyć needs_root_rights = yes ? -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org ) From masko w ipipan.waw.pl Sun Feb 28 19:01:32 2016 From: masko w ipipan.waw.pl (=?utf-8?B?xYF1a2FzeiBNYcWba28=?=) Date: Sun, 28 Feb 2016 19:01:32 +0100 Subject: X'y In-Reply-To: <56D32445.1070704@sojka.co> References: <13fbf1fc.3196230a.56d2e081.21af8@o2.pl> <56D32445.1070704@sojka.co> Message-ID: <1479916.VpjO0QLGrF@laptok> Dnia niedziela, 28 lutego 2016 17:45:57 Grzegorz Sójka pisze: > Znalazłem! Jakimś cudem dałem suid i guid do /usr/bin/Xorg zamiast do > /usr/lib64/xorg/Xorg. Teraz działa. Nie mam SUID czy GUID na żadnym z tych plików. I nie uruchamiam z root-a. A działa. Dziwne... ;-) -- Łukasz Maśko _o) Lukasz.Masko(at)ipipan.waw.pl /\\ Registered Linux User #61028 _\_V Ubuntu: staroafrykańskie słowo oznaczające "Nie umiem zainstalować Debiana" From blues w pld-linux.org Mon Feb 29 10:59:25 2016 From: blues w pld-linux.org (=?ISO-8859-2?Q?Pawe=B3_Go=B3aszewski?=) Date: Mon, 29 Feb 2016 10:59:25 +0100 (CET) Subject: X'y In-Reply-To: <56D0E372.2030700@sojka.co> References: <56D0E372.2030700@sojka.co> Message-ID: On Sat, 27 Feb 2016, Grzegorz Sójka wrote: > Witam serdecznie, > > Znalazł ktoś jakiś sposób na odpalenie X'ów na Core2Duo? > Na i5 i i7 jakoś chodzi. Jeśli downgrade to do jakiej wersji? Chodzi normalnie Intel(R) Core(TM)2 Duo CPU E8200 Tylko... co procesor ma do rzeczy? Grafika się liczy. -- pozdr. Paweł Gołaszewski jid:bluesjabbergdapl -------------------------------------------------------------------------- If you think of MS-DOS as mono, and Windows as stereo, then Linux is Dolby Pro-Logic Surround Sound with Bass Boost and all the music is free.