SOURCES: php4-eaccelerator.ini (NEW) - original from eaccelerator-...

[glen]

Author: glen                         Date: Wed Aug 24 10:28:29 2005 GMT
Module: SOURCES                       Tag: HEAD
---- Log message:
- original from eaccelerator-0.9.3 sources

---- Files affected:
SOURCES:
   php4-eaccelerator.ini (NONE -> 1.1)  (NEW)

---- Diffs:

================================================================
Index: SOURCES/php4-eaccelerator.ini
diff -u /dev/null SOURCES/php4-eaccelerator.ini:1.1
--- /dev/null	Wed Aug 24 12:28:29 2005
+++ SOURCES/php4-eaccelerator.ini	Wed Aug 24 12:28:24 2005
@@ -0,0 +1,114 @@
+[eaccelerator]
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+;
+; eAccelerator is compatible with Zend Optimizer's loader. Zend Optimizer
+; must be installed after eAccelerator in php.ini. If you don't use scripts
+; encoded with Zend Encoder then we do not recommend you install Zend Optimizer
+; with eAccelerator.
+
+
+; You must uncomment one (and only one) line from the following to load
+; eAccelerator extension.
+;extension="eaccelerator.so"
+zend_extension="/usr/lib/php4/eaccelerator.so"
+;zend_extension_ts="/usr/lib/php4/eaccelerator.so"
+;extension="eaccelerator.dll"
+;zend_extension_ts="c:\php4\eaccelerator.dll"
+;zend_extension="c:\php4\eaccelerator.dll"
+
+; The amount of shared memory (in megabytes) that eAccelerator will use.
+; "0" means OS default. Default value is "0".
+eaccelerator.shm_size = "64"
+
+; The directory that is used for disk cache. eAccelerator stores precompiled
+; code, session data, content and user entries  here. The same data can be
+; stored in shared memory also (for more quick access). Default value is
+; "/tmp/eaccelerator".
+eaccelerator.cache_dir = "/tmp/eaccelerator"
+
+; Enables or disables eAccelerator. Should be "1" for enabling or
+; "0" for disabling. Default value is "1".
+eaccelerator.enable = "1"
+
+; Enables or disables internal peephole optimizer which may speed up code
+; execution. Should be "1" for enabling or "0" for disabling.
+; Default value is "1".
+eaccelerator.optimizer = "1"
+
+; Enables or disables debug logging. Should be "1" for enabling or
+; "0" for disabling. Default value is "0".
+eaccelerator.debug = "0"
+
+; Enables or disables PHP file modification checking. Should be "1"
+; for enabling or "0" for disabling. You should set it to "1" if you want
+; to recompile PHP files after modification. Default value is "1".
+eaccelerator.check_mtime = "1"
+
+; Determine which PHP files must be cached. You may specify the number of
+; patterns (for example "*.php *.phtml") which specifies to cache or
+; not to cache. If pattern starts with the character "!", it means to ignore
+; files which are matched by the following pattern. Default value is "" that
+; means - all PHP scripts will be cached.
+eaccelerator.filter = ""
+
+; Disables putting large values into shared memory by "eaccelerator_put()"
+; function.
+; It indicates the largest allowed size in bytes (10240, 10K, 1M). The "0"
+; disables the limit. Default value is "0".
+eaccelerator.shm_max = "0"
+
+; When eAccelerator fails to get shared memory for new script it removes 
+; all scripts which were not accessed at last "shm_ttl" seconds from shared
+; memory. Default value is "0" that means - don't remove any files from
+; shared memory.
+eaccelerator.shm_ttl = "0"
+
+; When eAccelerator fails to get shared memory for new script it tryes to 
+; remove old script if the previous try was made more then "shm_prune_period"
+; seconds ago. Default value is "0" that means - don't try to remove any
+; files from shared memory.
+eaccelerator.shm_prune_period = "0"
+
+; Enables or disables caching of compiled scripts on disk. It has no effect
+; on session data and content caching.
+; Default value is "0" that means - use disk and shared memory for caching.
+eaccelerator.shm_only = "0"
+
+; Enables or disables cached content compression. Default value is "1" that
+; means enable compression.
+eaccelerator.compress = "1"
+
+; Compression level used for content caching.  Default value is "9" which i
+; is the maximum compression level
+eaccelerator.compress_level = "9"
+
+; Determine where keys, session data and content will be cached. The possible
+; values are:
+; "shm_and_disk" - cache data in shared memory and on disk (default value)
+; "shm"          - cache data in shared memory or on disk if shared memory
+;                  is full or data size greater then "eaccelerator.shm_max"
+; "shm_only"     - cache data in shared memory
+; "disk_only"    - cache data on disk
+; "none"         - don't cache data
+eaccelerator.keys     = "shm_and_disk"
+eaccelerator.sessions = "shm_and_disk"
+eaccelerator.content  = "shm_and_disk"
+
+; eAccelerator can be managed through web interface script  eaccelerator.php. So
+; you need to put this file on  your  web  site.  For  security  reasons  it  is
+; recommended to restrict the usage of this script by your local IP.
+;
+; To create the eAccelerator password type
+;
+; php -q eaccelerator_password.php
+; Changing password for eAccelerator Web Interface (eaccelerator.php)
+;
+; Enter admin name: admin
+; New admin password: eaccelerator
+; Retype new admin password: eaccelerator
+
+eaccelerator.admin.name="yourusername"
+eaccelerator.admin.password="yourpassword"
================================================================