SPECS: aero.spec - pl, some cleanups

[qboosh]

Author: qboosh                       Date: Tue Dec  6 17:34:42 2005 GMT
Module: SPECS                         Tag: HEAD
---- Log message:
- pl, some cleanups

---- Files affected:
SPECS:
   aero.spec (1.1 -> 1.2) 

---- Diffs:

================================================================
Index: SPECS/aero.spec
diff -u SPECS/aero.spec:1.1 SPECS/aero.spec:1.2
--- SPECS/aero.spec:1.1	Tue Dec  6 00:43:35 2005
+++ SPECS/aero.spec	Tue Dec  6 18:34:36 2005
@@ -1,10 +1,10 @@
 # $Revision$, $Date$
-#
 Summary:	Simulation program based on rigid body systems
+Summary(pl):	Program do symulacji opartych na układach bryły sztywnej
 Name:		aero
 Version:	1.7.0
 Release:	0.1
-License:	Public domain
+License:	Public Domain
 Group:		Applications
 Source0:	http://robotics.ee.uwa.edu.au/aero/ftp/%{name}_%{version}_src.tar.gz
 # Source0-md5:	2ea6f065bc77162ce6b4f4c4a17a3636
@@ -12,10 +12,16 @@
 BuildRoot:	%{tmpdir}/%{name}-%{version}-root-%(id -u -n)
 
 %description
-AERO is a simulation program based on rigid body systems. With the built-in 
-3D editor you can create a virtual scene consisting of spheres, boxes 
-(cuboids), cylinders and plains. These objects may be connected with links 
-like spring, damper, rod and joint.
+AERO is a simulation program based on rigid body systems. With the
+built-in 3D editor you can create a virtual scene consisting of
+spheres, boxes (cuboids), cylinders and plains. These objects may be
+connected with links like spring, damper, rod and joint.
+
+%description -l pl
+AERO to program do symulacji opartych na układach bryły sztywnej. Przy
+użyciu wbudowanego edytora 3D można tworzyć sceny wirtualne składające
+się ze sfer, prostopadłościanów, cylindrów i płaszczyzn. Obiekty te
+można łączyć elementami takimi jak sprężyny, tłumiki, pręty i złącza.
 
 %prep
 %setup -q -n %{name}
@@ -30,9 +36,6 @@
 
 %install
 rm -rf $RPM_BUILD_ROOT
-# create directories if necessary
-#install -d $RPM_BUILD_ROOT
-#install -d $RPM_BUILD_ROOT%{_examplesdir}/%{name}-%{version}
 
 %{__make} install \
 	DESTDIR=$RPM_BUILD_ROOT
@@ -40,31 +43,11 @@
 %clean
 rm -rf $RPM_BUILD_ROOT
 
-%pre
-
-%post
-
-%preun
-
-%postun
-
 %if %{with ldconfig}
 %post	-p /sbin/ldconfig
 %postun	-p /sbin/ldconfig
 %endif
 
-%if %{with initscript}
-%post init
-/sbin/chkconfig --add %{name}
-%service %{name} restart
-
-%preun init
-if [ "$1" = "0" ]; then
-	%service -q %{name} stop
-	/sbin/chkconfig --del %{name}
-fi
-%endif
-
 %files
 %defattr(644,root,root,755)
 %doc AUTHORS CREDITS ChangeLog NEWS README THANKS TODO
@@ -77,27 +60,14 @@
 %{_datadir}/%{name}
 %endif
 
-# initscript and its config
-%if %{with initscript}
-%attr(754,root,root) /etc/rc.d/init.d/%{name}
-%config(noreplace) %verify(not md5 mtime size) /etc/sysconfig/%{name}
-%endif
-
-#%{_examplesdir}/%{name}-%{version}
-
-%if %{with subpackage}
-%files subpackage
-%defattr(644,root,root,755)
-#%doc extras/*.gz
-#%{_datadir}/%{name}-ext
-%endif
-
 %define date	%(echo `LC_ALL="C" date +"%a %b %d %Y"`)
 %changelog
 * %{date} PLD Team <feedback at pld-linux.org>
 All persons listed below can be reached at <cvs_login>@pld-linux.org
 
 $Log$
+Revision 1.2  2005/12/06 17:34:36  qboosh
+- pl, some cleanups
+
 Revision 1.1  2005/12/05 23:43:35  adasi
 - totally NFY, just as a TODO marker
-
================================================================

---- CVS-web:
    http://cvs.pld-linux.org/SPECS/aero.spec?r1=1.1&r2=1.2&f=u