SOURCES: apache-httpd.conf - new config for apache 2.2
glen
glen at pld-linux.org
Wed Dec 14 22:19:05 CET 2005
Author: glen Date: Wed Dec 14 21:19:05 2005 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- new config for apache 2.2
---- Files affected:
SOURCES:
apache-httpd.conf (1.40 -> 1.41)
---- Diffs:
================================================================
Index: SOURCES/apache-httpd.conf
diff -u SOURCES/apache-httpd.conf:1.40 SOURCES/apache-httpd.conf:1.41
--- SOURCES/apache-httpd.conf:1.40 Mon Nov 21 10:28:43 2005
+++ SOURCES/apache-httpd.conf Wed Dec 14 22:19:00 2005
@@ -1,888 +1,63 @@
# $Id$
#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# The configuration directives are grouped into three basic sections:
-# 1. Directives that control the operation of the Apache server process as a
-# whole (the 'global environment').
-# 2. Directives that define the parameters of the 'main' or 'default' server,
-# which responds to requests that aren't handled by a virtual host.
-# These directives also provide default values for the settings
-# of all virtual hosts.
-# 3. Settings for virtual hosts, which allow Web requests to be sent to
-# different IP addresses or hostnames and have them handled by the
-# same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "/foo.log"
-# with ServerRoot set to "/etc/httpd/httpd" will be interpreted by the
-# server as "/etc/httpd/httpd//foo.log".
+# This is the main Apache HTTP server configuration file.
+# It contains the configuration directives that give the server its instructions.
#
+# This config aims to be clean and readable.
+# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
+# In particular, see
+# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# for a discussion of each configuration directive.
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
ServerRoot "/etc/httpd"
+DefaultType text/plain
-#
-# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#
-<IfModule !mpm_winnt.c>
-<IfModule !mpm_netware.c>
-#LockFile /accept.lock
-</IfModule>
-</IfModule>
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# If unspecified (the default), the scoreboard will be stored in an
-# anonymous shared memory segment, and will be unavailable to third-party
-# applications.
-# If specified, ensure that no two invocations of Apache share the same
-# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
-#
-<IfModule !mpm_netware.c>
-<IfModule !perchild.c>
-#ScoreBoardFile /apache_runtime_status
-</IfModule>
-</IfModule>
-
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-<IfModule !mpm_netware.c>
-PidFile /var/run/httpd.pid
-</IfModule>
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-##
-## Server-Pool Size Regulation (MPM specific)
-##
-
-# prefork MPM
-# StartServers: number of server processes to start
-# MinSpareServers: minimum number of server processes which are kept spare
-# MaxSpareServers: maximum number of server processes which are kept spare
-# MaxClients: maximum number of server processes allowed to start
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule prefork.c>
-StartServers 5
-MinSpareServers 5
-MaxSpareServers 10
-MaxClients 150
-MaxRequestsPerChild 0
-</IfModule>
-
-# worker MPM
-# StartServers: initial number of server processes to start
-# MaxClients: maximum number of simultaneous client connections
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# ThreadsPerChild: constant number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule worker.c>
-StartServers 2
-MaxClients 150
-MinSpareThreads 25
-MaxSpareThreads 75
-ThreadsPerChild 25
-MaxRequestsPerChild 0
-</IfModule>
-
-# perchild MPM
-# NumServers: constant number of server processes
-# StartThreads: initial number of worker threads in each server process
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# MaxThreadsPerChild: maximum number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of connections per server process
-<IfModule perchild.c>
-NumServers 5
-StartThreads 5
-MinSpareThreads 5
-MaxSpareThreads 10
-MaxThreadsPerChild 20
-MaxRequestsPerChild 0
-</IfModule>
-
-# WinNT MPM
-# ThreadsPerChild: constant number of worker threads in the server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_winnt.c>
-ThreadsPerChild 250
-MaxRequestsPerChild 0
-</IfModule>
-
-# BeOS MPM
-# StartThreads: how many threads do we initially spawn?
-# MaxClients: max number of threads we can have (1 thread == 1 client)
-# MaxRequestsPerThread: maximum number of requests each thread will process
-<IfModule beos.c>
-StartThreads 10
-MaxClients 50
-MaxRequestsPerThread 10000
-</IfModule>
-
-# NetWare MPM
-# ThreadStackSize ...... Stack size allocated for each worker thread
-# StartThreads ......... Number of worker threads launched at server startup
-# MinSpareThreads ...... Minimum number of idle threads, to handle request spikes
-# MaxSpareThreads ...... Maximum number of idle threads
-# MaxThreads ........... Maximum number of worker threads alive at the same time
-# MaxRequestsPerChild .. Maximum number of requests a thread serves. It is
-# recommended that the default value of 0 be set for this
-# directive on NetWare. This will allow the thread to
-# continue to service requests indefinitely.
-<IfModule mpm_netware.c>
-ThreadStackSize 65536
-StartThreads 250
-MinSpareThreads 25
-MaxSpareThreads 250
-MaxThreads 1000
-MaxRequestsPerChild 0
-</IfModule>
-
-# Metux MPM
-# StartThreads ......... Number of threads each child creates
-# MinSpareThreads ...... Minimum number of idle threads per child, to handle request spikes
-# MaxSpareThreads ...... Maximum number of idle threads per child
-# MaxThreadsmetuxmpm ... Maximum number of threads per child
-# Multiplexer .......... Specify an Multiplexer Child configuration
-# Processor ............ Specify a User and Group for a specific child process
-# AssignUserID ......... Tie a virtual host to a specific child process
-# ServerLimit .......... Maximum value of NumServers for this run of Apache
-# ThreadLimit .......... Maximum worker threads in a server for this run of Apache
-<IfModule metuxmpm.c>
-StartThreads 5
-MinSpareThreads 5
-MaxSpareThreads 10
-MaxRequestsPerChild 0
-Multiplexer "http" "http"
-</IfModule>
-
-# peruser MPM
-# MinSpareServers Minimum number of idle children, to handle request spikes
-# MaxProcessors Maximum number of processors per vhost
-# ServerLimit Maximum value of MaxClients for this run of Apache
-# Multiplexer Specify an Multiplexer Child configuration
-# Processor Specify a User and Group for a specific child process
-# ServerEnvironment Specify the server environment for this virtual host
-<IfModule peruser.c>
-MinSpareServers 5
-MaxProcessors 10
-MaxClients 150
-MaxRequestsPerChild 0
-
-Multiplexer "http" "http"
-
-# And for virtuals use:
-# Processor user group
-# Processor user group /home/services/httpd/chrootdir
-</IfModule>
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# It is usually good practice to create a dedicated user and group for
+# running httpd, as with most system services.
+User http
+Group http
-#
# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, in addition to the default. See also the <VirtualHost>
+# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
-#
-#Listen 12.34.56.78:80
+# prevent Apache from glomming onto all bound IP addresses.
+#Listen 192.168.1.1:80
Listen 80
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-#
-#
-LoadModule access_module modules/mod_access.so
-LoadModule alias_module modules/mod_alias.so
-LoadModule asis_module modules/mod_asis.so
-LoadModule cern_meta_module modules/mod_cern_meta.so
-LoadModule cgi_module modules/mod_cgi.so
-LoadModule env_module modules/mod_env.so
-LoadModule include_module modules/mod_include.so
-LoadModule log_config_module modules/mod_log_config.so
-LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule mime_module modules/mod_mime.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule setenvif_module modules/mod_setenvif.so
-LoadModule speling_module modules/mod_speling.so
-LoadModule userdir_module modules/mod_userdir.so
-
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-<IfModule !mpm_winnt.c>
-<IfModule !mpm_netware.c>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-# . On HPUX you may not be able to use shared memory as nobody, and the
-# suggested workaround is to create a user www and use that user.
-# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-# when the value of (unsigned)Group is above 60000;
-# don't use Group #-1 on these systems!
-#
-User http
-Group http
-</IfModule>
-</IfModule>
-
-#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin at your-domain.com
#
-ServerAdmin you at your.address
+ServerAdmin you at example.com
-#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
-# If this is not set to valid DNS name for your host, server-generated
-# redirections will not work. See also the UseCanonicalName directive.
-#
# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address anyway, and this will make
-# redirections work in a sensible way.
-#
-#ServerName new.host.name:80
-
-#
-# UseCanonicalName: Determines how Apache constructs self-referencing
-# URLs and the SERVER_NAME and SERVER_PORT variables.
-# When set "Off", Apache will use the Hostname and Port supplied
-# by the client. When set "On", Apache will use the value of the
-# ServerName directive.
-#
-UseCanonicalName Off
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/home/services/httpd/html"
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# features.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/home/services/httpd/html">
-
-#
-# Possible values for the Options directive are "None", "All",
-# or any combination of:
-# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-# The Options directive is both complicated and important. Please see
-# http://httpd.apache.org/docs-2.0/mod/core.html#options
-# for more information.
-#
- Options Indexes FollowSymLinks
-
-#
-# AllowOverride controls what directives may be placed in .htaccess files.
-# It can be "All", "None", or any combination of the keywords:
-# Options FileInfo AuthConfig Limit
-#
- AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
- Order allow,deny
- Allow from all
-
-</Directory>
-
-#
-# UserDir: The name of the directory that is appended onto a user's home
-# directory if a ~user request is received.
-#
-UserDir public_html
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/users/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <LimitExcept GET POST OPTIONS PROPFIND>
-# Order deny,allow
-# Deny from all
-# </LimitExcept>
-#</Directory>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information. See also the AllowOverride directive.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being
-# viewed by Web clients.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
-</Files>
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-TypesConfig /etc/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-<IfModule mod_mime_magic.c>
- MIMEMagicFile /etc/httpd/magic
-</IfModule>
+#ServerName www.example.com:80
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
-#
-ErrorLog /var/log/httpd/error_log
+ErrorLog logs/error_log
-#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
-#
LogLevel warn
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here. Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/httpd/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/httpd/referer_log referer
-#CustomLog /var/log/httpd/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/httpd/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
-ServerSignature On
-#ServerTokens Prod
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL. So "/icons" isn't aliased in this
-# example, only "/icons/". If the fakename is slash-terminated, then the
-# realname must also be slash terminated, and if the fakename omits the
-# trailing slash, the realname must also omit it.
-#
-# We include the /icons/ alias for FancyIndexed directory listings. If you
-# do not use FancyIndexing, you may comment this out.
-#
-Alias /icons/ "/home/services/httpd/icons/"
-
-<Directory "/home/services/httpd/icons/">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# This should be changed to the ServerRoot/manual/. The alias provides
-# the manual, even if you choose to move your DocumentRoot. You may comment
-# this out if you do not care for the documentation.
-#
-Alias /manual "/home/services/httpd/manual/"
-
-<Directory "/home/services/httpd/manual/">
- Options Indexes FollowSymLinks MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
<<Diff was trimmed, longer than 597 lines>>
---- CVS-web:
http://cvs.pld-linux.org/SOURCES/apache-httpd.conf?r1=1.40&r2=1.41&f=u
More information about the pld-cvs-commit
mailing list