ppcrcd/trunk/boot.dir/kparam.hlp

sparky cvs at pld-linux.org
Sat Jul 15 00:22:41 CEST 2006


Author: sparky
Date: Sat Jul 15 00:22:38 2006
New Revision: 7526

Modified:
   ppcrcd/trunk/boot.dir/kparam.hlp
Log:
- removed many pointless "See Documentation/*.txt"


Modified: ppcrcd/trunk/boot.dir/kparam.hlp
==============================================================================
--- ppcrcd/trunk/boot.dir/kparam.hlp	(original)
+++ ppcrcd/trunk/boot.dir/kparam.hlp	Sat Jul 15 00:22:38 2006
@@ -86,26 +86,19 @@
 running once the system is up.
 
 	53c7xx=		[HW,SCSI] Amiga SCSI controllers
-			See header of drivers/scsi/53c7xx.c.
-			See also Documentation/scsi/ncr53c7xx.txt.
 
 	advansys=	[HW,SCSI]
-			See header of drivers/scsi/advansys.c.
 
 	advwdt=		[HW,WDT] Advantech WDT
 			Format: <iostart>,<iostop>
 
 	aha152x=	[HW,SCSI]
-			See Documentation/scsi/aha152x.txt.
 
 	aha1542=	[HW,SCSI]
 			Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
 
 	aic7xxx=	[HW,SCSI]
-			See Documentation/scsi/aic7xxx.txt.
-
 	aic79xx=	[HW,SCSI]
-			See Documentation/scsi/aic79xx.txt.
 
 	applicom=	[HW]
 			Format: <mem>,<irq>
@@ -140,17 +133,14 @@
 
 	baycom_par=	[HW,AX25] BayCom Parallel Port AX.25 Modem
 			Format: <io>,<mode>
-			See header of drivers/net/hamradio/baycom_par.c.
 
 	baycom_ser_fdx=	[HW,AX25]
 			BayCom Serial Port AX.25 Modem (Full Duplex Mode)
 			Format: <io>,<irq>,<mode>[,<baud>]
-			See header of drivers/net/hamradio/baycom_ser_fdx.c.
 
 	baycom_ser_hdx=	[HW,AX25]
 			BayCom Serial Port AX.25 Modem (Half Duplex Mode)
 			Format: <io>,<irq>,<mode>
-			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
 	blkmtd_device=	[HW,MTD]
 	blkmtd_erasesz=
@@ -159,20 +149,16 @@
 	blkmtd_count=
 
 	BusLogic=	[HW,SCSI]
-			See drivers/scsi/BusLogic.c, comment before function
-			BusLogic_ParseDriverOptions().
 
 	c101=		[NET] Moxa C101 synchronous serial card
 
 	cdu31a=		[HW,CD]
 			Format: <io>,<irq>[,PAS]
-			See header of drivers/cdrom/cdu31a.c.
 
 	chandev=	[HW,NET] Generic channel device initialisation
 
 	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
-			See security/selinux/Kconfig help text.
 			0 -- check protection applied by kernel (includes
 				any implied execute protection).
 			1 -- check protection requested by application.
@@ -206,11 +192,6 @@
 			bits, and "f" is flow control ("r" for RTS or
 			omit it).  Default is "9600n8".
 
-			See Documentation/serial-console.txt for more
-			information.  See
-			Documentation/networking/netconsole.txt for an
-			alternative.
-
 		uart,io,<addr>[,options]
 		uart,mmio,<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
@@ -238,13 +219,11 @@
 	cyclades=	[HW,SERIAL] Cyclades multi-serial port adapter.
 
 	dasd=		[HW,NET]
-			See header of drivers/s390/block/dasd_devmap.c.
 
 	debug		[KNL] Enable kernel debugging (events log level).
 
 	decnet=		[HW,NET]
 			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.txt.
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
@@ -253,8 +232,6 @@
 			IO parameters + enable/disable command.
 
 	digiepca=	[HW,SERIAL]
-			See drivers/char/README.epca and
-			Documentation/digiepca.txt.
 
 	dmascc=		[HW,AX25,SERIAL] AX.25 Z80SCC driver with DMA
 			support available.
@@ -275,12 +252,9 @@
 
 	elevator=	[IOSCHED]
 			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
-			See Documentation/block/as-iosched.txt and
-			Documentation/block/deadline-iosched.txt for details.
 
 	enforcing	[SELINUX] Set initial enforcing status.
 			Format: {"0" | "1"}
-			See security/selinux/Kconfig help text.
 			0 -- permissive (log only, no denials).
 			1 -- enforcing (deny and log).
 			Default value is 0.
@@ -294,19 +268,14 @@
 			Format: <io>[,<irq>]
 
 	fd_mcs=		[HW,SCSI]
-			See header of drivers/scsi/fd_mcs.c.
 
 	fdomain=	[HW,SCSI]
-			See header of drivers/scsi/fdomain.c.
 
 	floppy=		[HW]
-			See Documentation/floppy.txt.
 
 	ftape=		[HW] Floppy Tape subsystem debugging options.
-			See Documentation/ftape.txt.
 
 	gdth=		[HW,SCSI]
-			See header of drivers/scsi/gdth.c.
 
 	gpt		[EFI] Forces disk with valid GPT signature but
 			invalid Protective MBR to be treated as GPT.
@@ -330,7 +299,6 @@
 			size on bigger boxes.
 
 	hisax=		[HW,ISDN]
-			See Documentation/isdn/README.HiSax.
 
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controlled can only read data from
@@ -360,7 +328,6 @@
 			capability is set.
 
 	ibmmcascsi=	[HW,MCA,SCSI] IBM MicroChannel SCSI adapter
-			See Documentation/mca.txt.
 
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
@@ -383,7 +350,6 @@
 			Set number of hash buckets for inode cache.
 
 	in2000=		[HW,SCSI]
-			See header of drivers/scsi/in2000.c.
 
 	init=		[KNL]
 			Format: <full_path>
@@ -407,18 +373,9 @@
 			changing hdc to sdb).
 			Format: combined (default), ide, or libata
 
-	io7=		[HW] IO7 for Marvel based alpha systems
-			See comment before marvel_specify_io7 in
-			arch/alpha/kernel/core_marvel.c.
-
-	ip=		[IP_PNP]
-			See Documentation/nfsroot.txt.
-
 	ip2=		[HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
-			See comment before ip2_setup() in drivers/char/ip2.c.
 
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
-			See header of drivers/scsi/ips.c.
 
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
@@ -444,9 +401,6 @@
 	lasi=		[HW,SCSI] PARISC LASI driver for the 53c700 chip
 			Format: addr:<io>,irq:<irq>
 
-	load_ramdisk=	[RAM] List of ramdisks to load from floppy
-			See Documentation/ramdisk.txt.
-
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
 			Format: <integer>
 
@@ -496,7 +450,6 @@
 				from each port should be examined, to see if
 				an IEEE 1284-compliant printer is attached; if
 				so, the driver will manage that printer.
-				See also header of drivers/char/lp.c.
 
 	lpj=n		[KNL]
 			Sets loops_per_jiffy to given constant, thus avoiding
@@ -538,7 +491,6 @@
 	mcdx=		[HW,CD]
 
 	md=		[HW] RAID subsystems devices and level
-			See Documentation/md.txt.
 
 	mdacon=		[MDA]
 			Format: <first>,<last>
@@ -566,7 +518,6 @@
 			<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
 
 	mtdparts=	[MTD]
-			See drivers/mtd/cmdline.c.
 
 	mtouchusb.raw_coordinates=
 			[HW] Make the MicroTouch USB driver use raw coordinates
@@ -575,7 +526,6 @@
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
 	NCR_D700=	[HW,SCSI]
-			See header of drivers/scsi/NCR_D700.c.
 
 	ncr5380=	[HW,SCSI]
 
@@ -594,12 +544,6 @@
 			This usage is only documented in each driver source
 			file if at all.
 
-	nfsaddrs=	[NFS]
-			See Documentation/nfsroot.txt.
-
-	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
-			See Documentation/nfsroot.txt.
-
 	nfs.callback_tcpport=
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
@@ -633,7 +577,6 @@
 
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
-			See also Documentation/scsi/st.txt.
 
 	panic=		[KNL] Kernel behaviour on panic
 			Format: <timeout>
@@ -668,7 +611,6 @@
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
 	pas16=		[HW,SCSI]
-			See header of drivers/scsi/pas16.c.
 
 	pause_on_oops=
 			Halt all CPUs after the first oops has been printed for
@@ -678,8 +620,6 @@
 	pcbit=		[HW,ISDN]
 
 	pcd.		[PARIDE]
-			See header of drivers/block/paride/pcd.c.
-			See also Documentation/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
 		off		[IA-32] don't probe for the PCI bus
@@ -751,17 +691,11 @@
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]
-			See Documentation/paride.txt.
-
 	pf.		[PARIDE]
-			See Documentation/paride.txt.
-
 	pg.		[PARIDE]
-			See Documentation/paride.txt.
 
 	plip=		[PPT,NET] Parallel port network link
 			Format: { parport<nr> | timid | 0 }
-			See also Documentation/parport.txt.
 
 	pnpbios=	[ISAPNP]
 			{ on | off | curr | res | no-curr | no-res }
@@ -786,10 +720,6 @@
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
 
-	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
-			before loading.
-			See Documentation/ramdisk.txt.
-
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@@ -804,22 +734,17 @@
 			0 = disabled, 1 = enabled (default).
 
 	pt.		[PARIDE]
-			See Documentation/paride.txt.
 
 	quiet=		[KNL] Disable log messages
 
 	raid=		[HW,RAID]
-			See Documentation/md.txt.
 
 	ramdisk=	[RAM] Sizes of RAM disks in kilobytes [deprecated]
-			See Documentation/ramdisk.txt.
 
 	ramdisk_blocksize=	[RAM]
-			See Documentation/ramdisk.txt.
 
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			New name for the ramdisk parameter.
-			See Documentation/ramdisk.txt.
 
 	rcu.blimit=	[KNL,BOOT] Set maximum number of finished
 			RCU callbacks to process in one batch.
@@ -859,20 +784,16 @@
 	S		[KNL] Run init in single mode
 
 	sa1100ir	[NET]
-			See drivers/net/irda/sa1100_ir.c.
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
 
 	sbpcd=		[HW,CD] Soundblaster CD adapter
 			Format: <io>,<type>
-			See a comment before function sbpcd_setup() in
-			drivers/cdrom/sbpcd.c.
 
 	sc1200wdt=	[HW,WDT] SC1200 WDT (watchdog) driver
 			Format: <io>[,<timeout>[,<isapnp>]]
 
 	scsi_debug_*=	[SCSI]
-			See drivers/scsi/scsi_debug.c.
 
 	scsi_default_dev_flags=
 			[SCSI] SCSI default device flags
@@ -886,7 +807,6 @@
 
 	selinux		[SELINUX] Disable or enable SELinux at boot time.
 			Format: { "0" | "1" }
-			See security/selinux/Kconfig help text.
 			0 -- disable.
 			1 -- enable.
 			Default value is set via kernel config option.
@@ -899,11 +819,9 @@
 			Maximal number of shapers.
 
 	sim710=		[SCSI,HW]
-			See header of drivers/scsi/sim710.c.
 
 	sjcd=		[HW,CD]
 			Format: <io>,<irq>,<dma>
-			See header of drivers/cdrom/sjcd.c.
 
 	slram=		[HW,MTD]
 
@@ -914,10 +832,8 @@
 			Format: <io>[,<irq>]
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
-			See Documentation/sonypi.txt
 
 	specialix=	[HW,SERIAL] Specialix multi-serial port adapter
-			See Documentation/specialix.txt.
 
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
@@ -925,22 +841,17 @@
 	spia_peddr=
 
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
-			See Documentation/scsi/st.txt.
 
 	st0x=		[HW,SCSI]
-			See header of drivers/scsi/seagate.c.
 
 	sti_font=	[HW]
-			See comment in drivers/video/console/sticore.c.
 
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
 	sym53c416=	[HW,SCSI]
-			See header of drivers/scsi/sym53c416.c.
 
 	t128=		[HW,SCSI]
-			See header of drivers/scsi/t128.c.
 
 	thash_entries=	[KNL,NET]
 			Set number of hash buckets for TCP connection
@@ -955,22 +866,17 @@
 			Set inter-bit delay in microseconds (default 10).
 
 	tmc8xx=		[HW,SCSI]
-			See header of drivers/scsi/seagate.c.
 
 	tmscsim=	[HW,SCSI]
-			See comment before function dc390_setup() in
-			drivers/scsi/tmscsim.c.
 
 	tp720=		[HW,PS2]
 
 	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
-			See header of drivers/scsi/u14-34f.c.
 
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 
 	video=		[FB] Frame buffer configuration
-			See Documentation/fb/modedb.txt.
 
 	vmalloc=nn[KMG]	[KNL,BOOT] Forces the vmalloc area to have an exact
 			size of <nn>. This can be used to increase the
@@ -979,16 +885,13 @@
 			mapped kernel RAM.
 
 	wd33c93=	[HW,SCSI]
-			See header of drivers/scsi/wd33c93.c.
 
 	wd7000=		[HW,SCSI]
-			See header of drivers/scsi/wd7000.c.
 
 	wdt=		[WDT] Watchdog
-			See Documentation/watchdog/watchdog.txt.
 
 	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
-	xd_geo=		See header of drivers/block/xd.c.
+	xd_geo=
 
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:


More information about the pld-cvs-commit mailing list