SOURCES: amanda-bashizm.patch, amanda-chg-zd-mtx-sh.patch, amanda-...
baggins
baggins at pld-linux.org
Wed May 7 13:05:45 CEST 2008
Author: baggins Date: Wed May 7 11:05:45 2008 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- updated to 2.6.0
---- Files affected:
SOURCES:
amanda-bashizm.patch (1.1 -> 1.2) , amanda-chg-zd-mtx-sh.patch (1.2 -> 1.3) , amanda-no_libnsl.patch (1.1 -> 1.2)
---- Diffs:
================================================================
Index: SOURCES/amanda-bashizm.patch
diff -u SOURCES/amanda-bashizm.patch:1.1 SOURCES/amanda-bashizm.patch:1.2
--- SOURCES/amanda-bashizm.patch:1.1 Fri Jun 22 15:50:00 2007
+++ SOURCES/amanda-bashizm.patch Wed May 7 13:05:39 2008
@@ -1,37 +1,20 @@
---- amanda-2.5.2p1/configure.in~ 2007-06-22 15:02:56.000000000 +0200
-+++ amanda-2.5.2p1/configure.in 2007-06-22 15:12:17.000000000 +0200
-@@ -958,7 +958,7 @@
- # now convert that to a comma-separated list of C strings
- eval "set dummy ${SSH_OPTIONS}"; shift
- SSH_OPTIONS=''
-- for i in "${@}"; do SSH_OPTIONS="${SSH_OPTIONS}${SSH_OPTIONS:+, }\"${i/\"/\\\"}\""; done
-+ for i in "${@}"; do SSH_OPTIONS="${SSH_OPTIONS}${SSH_OPTIONS:+, }\"`echo $i | awk '/"/ {gsub(/"/,"\\"");} {print;}'`\""; done
- AC_MSG_RESULT($SSH_OPTIONS)
+--- amanda-2.6.0/config/amanda/dumpers.m4~ 2008-03-03 14:50:51.000000000 +0100
++++ amanda-2.6.0/config/amanda/dumpers.m4 2008-05-07 11:13:49.000000000 +0200
+@@ -41,7 +41,7 @@
+ fi
- AC_DEFINE_UNQUOTED(SSH_OPTIONS, $SSH_OPTIONS, [Arguments to ssh])
-@@ -1181,7 +1181,6 @@
- fi
- AC_CHECK_LIB(krb5support,main)
- KRB5LDFLAGS=-L$k5libdir
-- break
- fi
-
- if test "x$KRB5LDFLAGS" = "x" ; then
-@@ -1620,7 +1620,7 @@
-
- AC_PATH_PROGS(GNUTAR,gtar gnutar tar,,$LOCSYSPATH)
- if test ! -z "$GNUTAR"; then
-- case "`\"$GNUTAR\" --version 2>&1`" in
-+ case "`$GNUTAR --version 2>&1`" in
- *GNU*tar* | *Free*paxutils* )
- AC_DEFINE_UNQUOTED(GNUTAR,"$GNUTAR",[Define to the location of Gnu tar. ])
- ;;
-@@ -1633,7 +1633,7 @@
-
- AC_PATH_PROGS(SAMBA_CLIENT,smbclient,,$LOCSYSPATH)
- if test ! -z "$SAMBA_CLIENT"; then
-- case "`\"$SAMBA_CLIENT\" '\\\\not.a.host.name\\notashare' -U nosuchuser -N -Tx /dev/null 2>&1`" in
-+ case "`$SAMBA_CLIENT '\\\\not.a.host.name\\notashare' -U nosuchuser -N -Tx /dev/null 2>&1`" in
- *"Unknown host"*)
- smbversion=1
- ;;
+ if test ! -z "$GNUTAR"; then
+- case "`\"$GNUTAR\" --version 2>&1`" in
++ case "`$GNUTAR --version 2>&1`" in
+ *GNU*tar* | *Free*paxutils* ) : # OK, it is GNU tar
+ ;;
+ *)
+@@ -103,7 +103,7 @@
+ AC_PATH_PROG(SAMBA_CLIENT,smbclient,,$LOCSYSPATH)
+ smbversion=0
+ if test ! -z "$SAMBA_CLIENT"; then
+- case "`\"$SAMBA_CLIENT\" '\\\\not.a.host.name\\notashare' -U nosuchuser -N -Tx /dev/null 2>&1`" in
++ case "`$SAMBA_CLIENT '\\\\not.a.host.name\\notashare' -U nosuchuser -N -Tx /dev/null 2>&1`" in
+ *"Unknown host"*)
+ smbversion=1
+ ;;
================================================================
Index: SOURCES/amanda-chg-zd-mtx-sh.patch
diff -u SOURCES/amanda-chg-zd-mtx-sh.patch:1.2 SOURCES/amanda-chg-zd-mtx-sh.patch:1.3
--- SOURCES/amanda-chg-zd-mtx-sh.patch:1.2 Thu Jan 9 23:48:02 2003
+++ SOURCES/amanda-chg-zd-mtx-sh.patch Wed May 7 13:05:39 2008
@@ -1,6 +1,6 @@
---- amanda-2.4.3/changer-src/chg-zd-mtx.sh.in.orig Mon Sep 16 16:36:15 2002
-+++ amanda-2.4.3/changer-src/chg-zd-mtx.sh.in Thu Jan 9 23:16:47 2003
-@@ -358,7 +358,7 @@
+--- amanda-2.6.0/changer-src/chg-zd-mtx.sh.orig 2008-01-18 01:31:16.000000000 +0100
++++ amanda-2.6.0/changer-src/chg-zd-mtx.sh 2008-05-07 13:00:14.000000000 +0200
+@@ -361,7 +361,7 @@
internal_call=0
Exit() {
@@ -9,16 +9,31 @@
call_type=Return
else
call_type=Exit
-@@ -370,7 +370,7 @@
+@@ -373,7 +373,7 @@
exit_answer="$@"
- Log $call_type "($code)" "->" "$exit_slot" "$@"
+ Log $call_type "($code) -> $exit_slot $@"
echo "$exit_slot" "$@"
- if [ $call_type = Return ]; then
+ if [ "$call_type" = "Return" ]; then
return $code
fi
- amgetconf$SUF dbclose.$argv0:$DBGFILE > /dev/null 2>&1
-@@ -419,13 +419,13 @@
+ amgetconf dbclose.$argv0:$DBGFILE > /dev/null 2>&1
+@@ -390,12 +390,12 @@
+ "$@" > $stdout 2> $stderr
+ exitcode=$?
+ Log `_ 'Exit code: %s' "$exitcode"`
+- if [ -s $stdout ]
++ if [ -s "$stdout" ]
+ then
+ LogAppend Stdout:
+ cat $stdout >> $DBGFILE
+ fi
+- if [ -s $stderr ]
++ if [ -s "$stderr" ]
+ then
+ LogAppend Stderr:
+ cat $stderr >> $DBGFILE
+@@ -422,13 +422,13 @@
mtx_status_valid=0
get_mtx_status() {
test -n "$DEBUG" && set -x
@@ -34,7 +49,32 @@
mtx_status_valid=1
fi
return $status
-@@ -512,27 +512,27 @@
+@@ -489,7 +489,7 @@
+ fi
+
+ #Use the current slot if it's empty and we don't know which slot is loaded'
+- if [ $loadedslot -eq -2 ]; then
++ if [ "$loadedslot" -eq -2 ]; then
+ set x `sed -n '
+ {
+ /^.*Storage Element '$currentslot':Empty/ {
+@@ -512,13 +512,13 @@
+ ' < $mtx_status 2>& 1`
+ shift # get rid of the "x"
+ loadedslotx=$1
+- if [ ! -z $loadedslotx ]; then
++ if [ ! -z "$loadedslotx" ]; then
+ loadedslot=$loadedslotx
+ fi
+ fi
+
+ #Use the first empty slot if we don't know which slot is loaded'
+- if [ $loadedslot -eq -2 ]; then
++ if [ "$loadedslot" -eq -2 ]; then
+ set x `sed -n '
+ {
+ /^.*Storage Element \([0-9][0-9]*\):Empty/ {
+@@ -586,27 +586,27 @@
}
' < $mtx_status 2>&1 | grep -v "^${cleanslot}\$" | sort -n`
slot_list=`echo $slot_list` # remove the newlines
@@ -44,7 +84,7 @@
for slot in $slot_list; do
- if [ $firstslot -lt 0 ]; then
+ if [ "$firstslot" -lt 0 ]; then
- Log "SLOTLIST -> firstslot set to $slot"
+ Log `_ 'SLOTLIST -> firstslot set to %s' "$slot"`
firstslot=$slot
fi
- if [ $lastslot -lt 0 ]; then
@@ -54,21 +94,21 @@
done
- if [ $lastslot -lt 0 -a $last -ge 0 ]; then
+ if [ "$lastslot" -lt 0 -a "$last" -ge 0 ]; then
- Log "SLOTLIST -> lastslot set to $last"
+ Log `_ 'SLOTLIST -> lastslot set to %s' "$last"`
lastslot=$last
fi
- if [ $firstslot -lt 0 ]; then
+ if [ "$firstslot" -lt 0 ]; then
Exit 2 \
- "<none>" \
- "cannot determine first slot"
+ `_ '<none>'` \
+ `_ 'cannot determine first slot'`
return $? # in case we are internal
- elif [ $lastslot -lt 0 ]; then
+ elif [ "$lastslot" -lt 0 ]; then
Exit 2 \
- "<none>" \
- "cannot determine last slot"
-@@ -541,7 +541,7 @@
+ `_ '<none>'` \
+ `_ 'cannot determine last slot'`
+@@ -615,7 +615,7 @@
fi
amanda_slot_list=
for slot in $slot_list; do
@@ -77,25 +117,63 @@
amanda_slot_list="$amanda_slot_list $slot"
fi
done
-@@ -589,7 +589,7 @@
- Exit 2 \
- "<none>" \
- "tapedev may not be empty"
+@@ -652,7 +652,7 @@
+ Exit 2 \
+ ` _ '<none>'` \
+ "tapedev $rawtape is not a tape device."
-elif [ $tape = "/dev/null" -o `expr "$tape" : 'null:'` -eq 5 ]; then
-+elif [ "$tape" = "/dev/null" -o `expr "$tape" : 'null:'` -eq 5 ]; then
++elif [ "$tape" = "/dev/null" -o "`expr "$tape" : 'null:'`" -eq 5 ]; then
Exit 2 \
- "<none>" \
+ `_ '<none>'` \
"tapedev ($tape) may not be the null device"
-@@ -599,7 +599,7 @@
+@@ -663,7 +663,7 @@
Exit 2 \
- "<none>" \
+ `_ '<none>'` \
"changerdev may not be empty"
-elif [ $TAPE = "/dev/null" ]; then
+elif [ "$TAPE" = "/dev/null" ]; then
Exit 2 \
- "<none>" \
+ `_ '<none>'` \
"changerdev ($TAPE) may not be the null device"
-@@ -674,7 +674,7 @@
+@@ -676,19 +676,19 @@
+ #### Set up the various config files.
+
+ conf_match=`expr "$changerfile" : .\*\.conf\$`
+-if [ $conf_match -ge 6 ]; then
++if [ "$conf_match" -ge 6 ]; then
+ configfile=$changerfile
+ changerfile=`echo $changerfile | sed 's/.conf$//g'`
+ else
+ configfile=$changerfile.conf
+ fi
+
+-if [ ! -e $configfile ]; then
++if [ ! -e "$configfile" ]; then
+ Exit 2 \
+ `_ '<none>'` \
+ "configuration file \"$configfile\" doesn't exist"
+ fi
+-if [ ! -f $configfile ]; then
++if [ ! -f "$configfile" ]; then
+ Exit 2 \
+ `_ '<none>'` \
+ "configuration file \"$configfile\" is not a file"
+@@ -698,10 +698,10 @@
+ accessfile=$changerfile-access
+ slotfile=$changerfile-slot
+ labelfile=$changerfile-barcodes
+-[ ! -s $cleanfile ] && echo 0 > $cleanfile
+-[ ! -s $accessfile ] && echo 0 > $accessfile
+-[ ! -s $slotfile ] && echo -1 > $slotfile
+-[ ! -f $labelfile ] && > $labelfile
++[ ! -s "$cleanfile" ] && echo 0 > $cleanfile
++[ ! -s "$accessfile" ] && echo 0 > $accessfile
++[ ! -s "$slotfile" ] && echo -1 > $slotfile
++[ ! -f "$labelfile" ] && > $labelfile
+ cleancount=`cat $cleanfile`
+ accesscount=`cat $accessfile`
+
+@@ -747,7 +747,7 @@
# Get DBGFILE set if it is not already.
@@ -104,9 +182,9 @@
if [ -d "$DBGDIR" ]; then
DBGFILE=$DBGDIR/changer.debug.drive$driveslot
else
-@@ -729,9 +729,9 @@
+@@ -827,9 +827,9 @@
- Log "Config info:"
+ Log `_ "Config info:"`
for var in $varlist; do
- if [ $var = "OFFLINE_BEFORE_UNLOAD" ]; then
+ if [ "$var" = "OFFLINE_BEFORE_UNLOAD" ]; then
@@ -116,43 +194,40 @@
continue # old name
fi
eval val=\"'$'$var\"
-@@ -752,13 +752,13 @@
+@@ -850,12 +850,12 @@
# Run the rest of the config file sanity checks.
-if [ $firstslot -gt $lastslot ]; then
+if [ "$firstslot" -gt "$lastslot" ]; then
Exit 2 \
- "<none>" \
- "firstslot ($firstslot) greater than" \
- "lastslot ($lastslot) in $configfile"
+ `_ '<none>'` \
+ `_ 'firstslot (%s) greater than lastslot (%s) in %s' "$firstslot" "$lastslot" "$configfile"`
fi
-if [ $autoclean -ne 0 -a $cleanslot -lt 0 ]; then
+if [ "$autoclean" -ne 0 -a "$cleanslot" -lt 0 ]; then
Exit 2 \
- "<none>" \
- "autoclean set but cleanslot not valid ($cleanslot)"
-@@ -768,12 +768,12 @@
+ `_ '<none>'` \
+ `_ 'autoclean set but cleanslot not valid (%s)' "$cleanslot"`
+@@ -865,10 +865,10 @@
currentslot=`cat $slotfile`
if IsNumeric "$currentslot" ; then
- if [ $currentslot -lt $firstslot ]; then
+ if [ "$currentslot" -lt "$firstslot" ]; then
- Log "SETUP -> current slot $currentslot" \
- "less than $firstslot ..." \
- "resetting to $firstslot"
+ Log `_ 'SETUP -> current slot %s less than %s ... resetting to %s' "$currentslot" "$firstslot" "$firstslot"`
currentslot=$firstslot
- elif [ $currentslot -gt $lastslot ]; then
+ elif [ "$currentslot" -gt "$lastslot" ]; then
- Log "SETUP -> current slot $currentslot" \
- "greater than $lastslot ..." \
- "resetting to $lastslot"
-@@ -789,19 +789,19 @@
+ Log `_ 'SETUP -> current slot %s greater than %s ... resetting to %s' "$currentslot" "$lastslot" "$lastslot"`
+ currentslot=$lastslot
+ fi
+@@ -881,19 +881,19 @@
first_slot_in_list=-1
next_slot_after_current=-1
for slot in $slot_list; do
- if [ $first_slot_in_list -lt 0 ]; then
-+ if [ "$first_slot"_in_list -lt 0 ]; then
++ if [ "$first_slot_in_list" -lt 0 ]; then
first_slot_in_list=$slot # in case $firstslot is missing
fi
- if [ $slot -eq $currentslot ]; then
@@ -172,29 +247,28 @@
new_currentslot=$first_slot_in_list
else
new_currentslot=$next_slot_after_current
-@@ -821,10 +821,10 @@
+@@ -912,9 +912,9 @@
test -n "$DEBUG" && set -x
- Log "EJECT -> ejecting tape from $tape"
+ Log `_ 'EJECT -> ejecting tape from %s' "$tape"`
get_loaded_info
- if [ $loadedslot -gt 0 ]; then
+ if [ "$loadedslot" -gt 0 ]; then
- Log "EJECT -> moving tape from drive $driveslot" \
- "to storage slot $loadedslot"
+ Log `_ 'EJECT -> moving tape from drive %s to storage slot %s' "$driveslot" "$loadedslot"`
- if [ $offline_before_unload -ne 0 ]; then
+ if [ "$offline_before_unload" -ne 0 ]; then
- Run $MT $MTF $tape offline > /dev/null 2>&1
+ Run try_eject_device $tape
fi
sleep $unloadpause
-@@ -832,7 +832,7 @@
+@@ -922,7 +922,7 @@
status=$?
- Log " -> status $status, result \"$result\""
+ Log `_ ' -> status %s, result "%s"' "$status" "$result"`
mtx_status_valid=0
- if [ $status -ne 0 ]; then
+ if [ "$status" -ne 0 ]; then
answer="$result"
code=2
else
-@@ -912,7 +912,7 @@
+@@ -1001,7 +1001,7 @@
prev_slot=$1
shift
while [ $# -gt 0 ]; do
@@ -203,7 +277,7 @@
break
fi
prev_slot=$1
-@@ -942,8 +942,8 @@
+@@ -1030,15 +1030,15 @@
# If the desired slot is already loaded, we are done. Only update
# current slot if this is not the cleaning slot.
get_loaded_info
@@ -214,7 +288,15 @@
rm -f $slotfile
echo $loadslot > $slotfile
fi
-@@ -954,20 +954,20 @@
+ Exit 0 "$loadedslot" "$rawtape"
+ return $? # in case we are internal
+ fi
+- if [ $loadedslot -eq -2 ]; then
++ if [ "$loadedslot" -eq -2 ]; then
+ Exit 0 "$loadedslot" "$rawtape"
+ return $? # in case we are internal
+ fi
+@@ -1046,20 +1046,20 @@
# If we are loading the cleaning tape, bump the cleaning count
# and reset the access count. Otherwise, bump the access count
# and see if it is time to do a cleaning.
@@ -238,7 +320,7 @@
Exit $status "$loadslot" "$exit_answer"
return $? # in case we are internal
fi
-@@ -987,14 +987,14 @@
+@@ -1079,14 +1079,14 @@
eject > /dev/null 2>&1
status=$?
internal_call=`expr $internal_call - 1`
@@ -256,33 +338,40 @@
rm -f $slotfile
echo $loadslot > $slotfile
fi
-@@ -1009,7 +1009,7 @@
+@@ -1100,7 +1100,7 @@
status=$?
- Log " -> status $status, result \"$result\""
+ Log `_ ' -> status %s, result "%s"' "$status" "$result"`
mtx_status_valid=0
- if [ $status -ne 0 ]; then
+ if [ "$status" -ne 0 ]; then
Exit 2 "$loadslot" "$result"
return $? # in case we are internal
fi
-@@ -1019,7 +1019,7 @@
+@@ -1110,7 +1110,7 @@
# for "long enough" (as determined empirically by the user),
# then return success.
###
- if [ $loadslot -eq $cleanslot ]; then
+ if [ "$loadslot" -eq "$cleanslot" ]; then
Run sleep $cleancycle
- Exit 0 "$loadslot" "$tape"
+ Exit 0 "$loadslot" "$rawtape"
return $? # in case we are internal
-@@ -1039,14 +1039,14 @@
+@@ -1122,7 +1122,7 @@
+ waittime=0
+ ready=0
+ sleep $initial_poll_delay
+- while [ $waittime -lt $max_drive_wait ]; do
++ while [ "$waittime" -lt "$max_drive_wait" ]; do
+ amdevcheck_status $tape
+ if [ $? -eq 0 ]; then
+ ready=1
+@@ -1131,12 +1131,12 @@
sleep $poll_drive_ready
waittime=`expr $waittime + $poll_drive_ready`
done
- if [ $ready -eq 0 ]; then
+ if [ "$ready" -eq 0 ]; then
- Exit 2 "$loadslot" "Drive not ready after" \
- "$max_drive_wait seconds," \
- "rewind said \"$result\""
+ Exit 2 "$loadslot" `_ 'Drive not ready after %s seconds, rewind said "%s"' "$max_drive_wait" "$result"`
return $? # in case we are internal
fi
@@ -291,7 +380,7 @@
rm -f $slotfile
echo $loadslot > $slotfile
fi
-@@ -1077,11 +1077,11 @@
+@@ -1167,11 +1167,11 @@
# can search based on barcodes.
###
reader=
@@ -304,55 +393,53 @@
+ if [ "$currentslot" -lt "$firstslot" -o "$currentslot" -gt "$lastslot" ]; then
currentslot=$firstslot # what "current" will get
fi
- set x $slot_list
-@@ -1116,8 +1116,8 @@
- "Line $line malformed in $labelfile: $lbl $bc $junk"
+ numslots=`expr $lastslot - $firstslot + 1`
+@@ -1202,7 +1202,7 @@
+ `_ 'Line %s malformed in %s: %s %s %s' "$line" "$labelfile" "$lbl" "$bc" "$junk"`
return $? # in case we are internal
fi
- if [ $lbl = "$lbl_search" -o $bc = "$bc_search" ]; then
-- if [ $labelfile_entry_found -ne 0 ]; then
+ if [ "$lbl" = "$lbl_search" -o "$bc" = "$bc_search" ]; then
-+ if [ "$labelfile_entry_found" -ne 0 ]; then
- Log "ERROR -> Duplicate entries: $labelfile line $line"
- LogAppend " -> Remove $labelfile" \
- "and run" \
-@@ -1146,12 +1146,12 @@
+ if [ $labelfile_entry_found -ne 0 ]; then
+ Log `_ 'ERROR -> Duplicate entries: %s line %s' "$labelfile" "$line"`
+ LogAppend `_ ' -> Remove %s and run "%s %s update"' "$labelfile" "$sbindir/amtape" "$config"`
+@@ -1230,12 +1230,12 @@
return $? # in case we are internal
fi
tapelabel=$1
- if [ $havereader -eq 0 ]; then
+ if [ "$havereader" -eq 0 ]; then
- Exit 2 "<none>" "Not configured with barcode reader"
+ Exit 2 `_ '<none>'` `_ 'Not configured with barcode reader'`
return $? # in case we are internal
fi
get_loaded_info
- if [ $loadedslot -lt 0 ]; then
+ if [ "$loadedslot" -lt 0 ]; then
- Exit 1 "<none>" "No tape currently loaded"
+ Exit 1 `_ '<none>'` `_ 'No tape currently loaded'`
return $? # in case we are internal
fi
-@@ -1160,7 +1160,7 @@
- "for slot $loadedslot" \
- "into $labelfile"
+@@ -1245,7 +1245,7 @@
+ fi
+ Log `_ 'LABEL -> Adding label "%s" with barcode "%s" for slot %s into %s' "$tapelabel" "$loadedbarcode" "$loadedslot" "$labelfile"`
read_labelfile "$tapelabel" "$loadedbarcode" < $labelfile
- if [ $labelfile_entry_found -ne 0 ]; then
+ if [ "$labelfile_entry_found" -ne 0 ]; then
lf_val=
if [ "$labelfile_barcode" != "$loadedbarcode" ]; then
lf_type=label
-@@ -1212,13 +1212,13 @@
+@@ -1289,13 +1289,13 @@
return $? # in case we are internal
fi
tapelabel=$1
- if [ $havereader -eq 0 ]; then
+ if [ "$havereader" -eq 0 ]; then
- Exit 2 "<none>" "Not configured with barcode reader"
+ Exit 2 `_ '<none>'` `_ 'Not configured with barcode reader'`
return $? # in case we are internal
fi
- Log "SEARCH -> Hunting for label \"$tapelabel\""
+ Log `_ 'SEARCH -> Hunting for label "%s"' "$tapelabel"`
read_labelfile "$tapelabel" "" < $labelfile
- if [ $labelfile_entry_found -eq 0 ]; then
+ if [ "$labelfile_entry_found" -eq 0 ]; then
- LogAppend " -> !!! label \"$tapelabel\" not found" \
- "in $labelfile !!!"
- LogAppend " -> Remove $labelfile" \
+ LogAppend `_ ' -> !!! label "%s" not found in %s !!!' "$tapelabel" "$labelfile"`
+ LogAppend `_ ' -> Remove %s and run "%s %s update"' "$labelfile" "$sbindir/amtape" "$config"`
+ Exit 2 \
================================================================
Index: SOURCES/amanda-no_libnsl.patch
diff -u SOURCES/amanda-no_libnsl.patch:1.1 SOURCES/amanda-no_libnsl.patch:1.2
--- SOURCES/amanda-no_libnsl.patch:1.1 Wed Aug 23 23:11:26 2000
+++ SOURCES/amanda-no_libnsl.patch Wed May 7 13:05:39 2008
@@ -1,12 +1,11 @@
-diff -Nru amanda-2.4.1p1/configure.in amanda-2.4.1p1.new/configure.in
---- amanda-2.4.1p1/configure.in Sat Nov 21 18:05:28 1998
-+++ amanda-2.4.1p1.new/configure.in Wed Aug 23 01:35:53 2000
-@@ -1596,6 +1596,8 @@
- *sgi-irix*)
- AC_CHECK_LIB(socket,main)
- ;;
-+ *linux*)
-+ ;;
- *)
- AC_CHECK_LIB(nsl,main)
- AC_CHECK_LIB(socket,main)
+--- amanda-2.6.0/config/amanda/libs.m4~ 2008-01-18 01:31:33.000000000 +0100
++++ amanda-2.6.0/config/amanda/libs.m4 2008-05-07 11:06:30.000000000 +0200
+@@ -80,6 +80,8 @@
+ *sgi-irix*)
+ AC_CHECK_LIB(socket,main)
+ ;;
++ *linux*)
++ ;;
+ *)
+ AC_CHECK_LIB(resolv,main)
+ AC_CHECK_LIB(nsl,main)
================================================================
---- CVS-web:
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/SOURCES/amanda-bashizm.patch?r1=1.1&r2=1.2&f=u
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/SOURCES/amanda-chg-zd-mtx-sh.patch?r1=1.2&r2=1.3&f=u
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/SOURCES/amanda-no_libnsl.patch?r1=1.1&r2=1.2&f=u
More information about the pld-cvs-commit
mailing list