SPECS: openocd.spec (NEW) - initial
adasi
adasi at pld-linux.org
Sun Jun 1 21:38:14 CEST 2008
Author: adasi Date: Sun Jun 1 19:38:14 2008 GMT
Module: SPECS Tag: HEAD
---- Log message:
- initial
---- Files affected:
SPECS:
openocd.spec (NONE -> 1.1) (NEW)
---- Diffs:
================================================================
Index: SPECS/openocd.spec
diff -u /dev/null SPECS/openocd.spec:1.1
--- /dev/null Sun Jun 1 21:38:14 2008
+++ SPECS/openocd.spec Sun Jun 1 21:38:09 2008
@@ -0,0 +1,80 @@
+# $Revision$, $Date$
+#
+%define snap 20080601
+%define no_install_post_strip 1
+
+Summary: Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing
+Name: openocd
+Version: 0.%{snap}
+Release: 0.1
+License: GPL
+Group: Applications
+Source0: http://ep09.pld-linux.org/~adasi/%{name}-%{snap}.tar.bz2
+# Source0-md5: 34a10a23ecb366935babb44d8bc0a44a
+URL: http://openocd.berlios.de/
+BuildRequires: autoconf
+BuildRequires: automake
+BuildRequires: libtool
+BuildRequires: texinfo
+BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
+
+%description
+The Open On-Chip Debugger (openocd) aims to provide debugging,
+in-system programming and boundary-scan testing for embedded target
+devices. The targets are interfaced using JTAG (IEEE 1149.1) compliant
+hardware, but this may be extended to other connection types in the
+future. Openocd currently supports Wiggler (clones), FTDI FT2232 based
+JTAG interfaces, the Amontec JTAG Accelerator, and the Gateworks
+GW1602. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920t, ARM922t,
+ARM926ej-s, ARM966e-s), XScale (PXA25x, IXP42x) and Cortex-M3
+(Luminary Stellaris LM3 and ST STM32) based cores to be debugged.
+Flash writing is supported for external CFI compatible flashes (Intel
+and AMD/Spansion command set) and several internal flashes (LPC2000,
+AT91SAM7, STR7x, STR9x, LM3 and STM32x). Preliminary support for using
+the LPC3180's NAND flash controller is included.
+
+%prep
+%setup -q -n %{name}-%{snap}
+
+%build
+%{__libtoolize}
+%{__aclocal}
+%{__autoconf}
+%{__autoheader}
+%{__automake}
+
+%configure
+%{__make}
+
+%install
+rm -rf $RPM_BUILD_ROOT
+# create directories if necessary
+#install -d $RPM_BUILD_ROOT
+#install -d $RPM_BUILD_ROOT%{_examplesdir}/%{name}-%{version}
+
+%{__make} install \
+ DESTDIR=$RPM_BUILD_ROOT
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(644,root,root,755)
+%doc AUTHORS ChangeLog NEWS README TODO
+%attr(755,root,root) %{_bindir}/openocd
+%{_libdir}/openocd/*
+%{_infodir}/openocd.info.gz
+
+
+%define date %(echo `LC_ALL="C" date +"%a %b %d %Y"`)
+
+
+%changelog
+* %{date} PLD Team <feedback at pld-linux.org>
+All persons listed below can be reached at <cvs_login>@pld-linux.org
+
+$Log$
+Revision 1.1 2008-06-01 19:38:09 adasi
+- initial
+
+
================================================================
More information about the pld-cvs-commit
mailing list