SVN: nagios-config/trunk/commands: . check_dhcp.cfg check_disk.cfg check_ftp.cfg check_hpjd.cfg chec...
glen
glen at pld-linux.org
Sun Oct 5 02:11:50 CEST 2008
Author: glen
Date: Sun Oct 5 02:11:50 2008
New Revision: 9892
Added:
nagios-config/trunk/commands/
nagios-config/trunk/commands/check_dhcp.cfg
nagios-config/trunk/commands/check_disk.cfg
nagios-config/trunk/commands/check_ftp.cfg
nagios-config/trunk/commands/check_hpjd.cfg
nagios-config/trunk/commands/check_http.cfg
nagios-config/trunk/commands/check_imap.cfg
nagios-config/trunk/commands/check_load.cfg
nagios-config/trunk/commands/check_mrtgtraf.cfg
nagios-config/trunk/commands/check_nt.cfg
nagios-config/trunk/commands/check_ping.cfg
nagios-config/trunk/commands/check_pop.cfg
nagios-config/trunk/commands/check_procs.cfg
nagios-config/trunk/commands/check_smtp.cfg
nagios-config/trunk/commands/check_snmp.cfg
nagios-config/trunk/commands/check_ssh.cfg
nagios-config/trunk/commands/check_swap.cfg
nagios-config/trunk/commands/check_tcp.cfg
nagios-config/trunk/commands/check_udp.cfg
nagios-config/trunk/commands/check_users.cfg
nagios-config/trunk/commands/commands.cfg
Log:
- objects from nagios 3.0.2
Added: nagios-config/trunk/commands/check_dhcp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_dhcp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_dhcp' command definition
+define command {
+ command_name check_dhcp
+ command_line $USER1$/check_dhcp $ARG1$
+}
Added: nagios-config/trunk/commands/check_disk.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_disk.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_local_disk' command definition
+define command {
+ command_name check_local_disk
+ command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+}
Added: nagios-config/trunk/commands/check_ftp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_ftp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_ftp' command definition
+define command {
+ command_name check_ftp
+ command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_hpjd.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_hpjd.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_hpjd' command definition
+define command {
+ command_name check_hpjd
+ command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_http.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_http.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_http' command definition
+define command {
+ command_name check_http
+ command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_imap.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_imap.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_imap' command definition
+define command {
+ command_name check_imap
+ command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_load.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_load.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_local_load' command definition
+define command {
+ command_name check_local_load
+ command_line $USER1$/check_load -w $ARG1$ -c $ARG2$
+}
Added: nagios-config/trunk/commands/check_mrtgtraf.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_mrtgtraf.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_local_mrtgtraf' command definition
+define command {
+ command_name check_local_mrtgtraf
+ command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+}
Added: nagios-config/trunk/commands/check_nt.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_nt.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_nt' command definition
+define command {
+ command_name check_nt
+ command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+}
Added: nagios-config/trunk/commands/check_ping.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_ping.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_ping' command definition
+define command {
+ command_name check_ping
+ command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+}
Added: nagios-config/trunk/commands/check_pop.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_pop.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_pop' command definition
+define command {
+ command_name check_pop
+ command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_procs.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_procs.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,6 @@
+# 'check_local_procs' command definition
+define command {
+ command_name check_local_procs
+ command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+}
+
Added: nagios-config/trunk/commands/check_smtp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_smtp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_smtp' command definition
+define command {
+ command_name check_smtp
+ command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_snmp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_snmp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_snmp' command definition
+define command {
+ command_name check_snmp
+ command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+}
Added: nagios-config/trunk/commands/check_ssh.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_ssh.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_ssh' command definition
+define command {
+ command_name check_ssh
+ command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+}
Added: nagios-config/trunk/commands/check_swap.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_swap.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_local_swap' command definition
+define command {
+ command_name check_local_swap
+ command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$
+}
Added: nagios-config/trunk/commands/check_tcp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_tcp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_tcp' command definition
+define command {
+ command_name check_tcp
+ command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+}
Added: nagios-config/trunk/commands/check_udp.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_udp.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_udp' command definition
+define command {
+ command_name check_udp
+ command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+}
Added: nagios-config/trunk/commands/check_users.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/check_users.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,5 @@
+# 'check_local_users' command definition
+define command {
+ command_name check_local_users
+ command_line $USER1$/check_users -w $ARG1$ -c $ARG2$
+}
Added: nagios-config/trunk/commands/commands.cfg
==============================================================================
--- (empty file)
+++ nagios-config/trunk/commands/commands.cfg Sun Oct 5 02:11:50 2008
@@ -0,0 +1,92 @@
+###############################################################################
+# COMMANDS.CFG
+#
+# $Id: contacts.cfg 5972 2005-05-14 13:33:19Z glen $
+################################################################################
+
+################################################################################
+# COMMAND DEFINITIONS
+#
+# SYNTAX:
+#
+# define command {
+# template <templatename>
+# name <objectname>
+# command_name <commandname>
+# command_line <commandline>
+# }
+#
+# WHERE:
+#
+# <templatename> = object name of another command definition that should be
+# used as a template for this definition (optional)
+# <objectname> = object name of command definition, referenced by other
+# command definitions that use it as a template (optional)
+# <commandname> = name of the command, as recognized/used by Nagios
+# <commandline> = command line
+#
+################################################################################
+
+################################################################################
+#
+# NOTIFICATION COMMANDS
+#
+# These are some example notification commands. They may or may not work on
+# your system without modification. As an example, some systems will require
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+# 'notify-host-by-email' command definition
+define command {
+ command_name notify-host-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+}
+
+# 'notify-service-by-email' command definition
+define command {
+ command_name notify-service-by-email
+ command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+}
+
+################################################################################
+#
+# HOST CHECK COMMANDS
+#
+################################################################################
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command {
+ command_name check-host-alive
+ command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+}
+
+################################################################################
+#
+# PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services). If you
+# plan on simply writing performance data out to a file, consider using the
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+# 'process-host-perfdata' command definition
+define command {
+ command_name process-host-perfdata
+ command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios/host-perfdata.out
+}
+
+# 'process-service-perfdata' command definition
+define command {
+ command_name process-service-perfdata
+ command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios/service-perfdata.out
+}
+
+# vim:ts=4:sw=4:ft=nagios
More information about the pld-cvs-commit
mailing list