SOURCES: mpd.conf (NEW) - initial - very base config file, please check it!
uzsolt
uzsolt at pld-linux.org
Mon Nov 3 19:48:44 CET 2008
Author: uzsolt Date: Mon Nov 3 18:48:44 2008 GMT
Module: SOURCES Tag: HEAD
---- Log message:
- initial
- very base config file, please check it!
---- Files affected:
SOURCES:
mpd.conf (NONE -> 1.1) (NEW)
---- Diffs:
================================================================
Index: SOURCES/mpd.conf
diff -u /dev/null SOURCES/mpd.conf:1.1
--- /dev/null Mon Nov 3 19:48:45 2008
+++ SOURCES/mpd.conf Mon Nov 3 19:48:39 2008
@@ -0,0 +1,282 @@
+#
+# Base configuration file for MPD on PLD-linux
+#
+# Based on the example configuration file for MPD
+# See the mpd.conf man page for a more detailed description of each parameter.
+
+######################## REQUIRED PATHS ########################
+# XXX Is there a better solution to music_directory? IMHO this is computer-specific. (uzsolt)
+music_directory "/music"
+playlist_directory "/var/lib/mpd/playlists"
+db_file "/var/lib/mpd/mpd.db"
+log_file "/var/lib/mpd/mpd.log"
+error_file "/var/lib/mpd/mpd.error"
+################################################################
+
+
+######################## OPTIONAL PATHS ########################
+#
+# If you wish to use mpd --kill to stop MPD, then you must
+# specify a file here in which to store MPD's process ID.
+#
+pid_file "/var/run/mpd/mpd.pid"
+#
+# If specified, MPD will save its current state (playlist,
+# current song, playing/paused, etc.) at exit. This will be
+# used to restore the session the next time it is run.
+#
+state_file "/var/run/mpd/mpdstate"
+#
+################################################################
+
+
+######################## DAEMON OPTIONS ########################
+#
+# If started as root, MPD will drop root privileges and run as
+# this user instead. Otherwise, MPD will run as the user it was
+# started by. If left unspecified, MPD will not drop root
+# privileges at all (not recommended).
+#
+user "mpd"
+#
+# The address and port to listen on.
+#
+#bind_to_address "any"
+#port "6600"
+#
+# Controls the amount of information that is logged. Can be
+# "default", "secure", or "verbose".
+#
+#log_level "default"
+#
+################################################################
+
+
+########################### ZEROCONF ###########################
+#
+# If yes, service information will be published with Zeroconf.
+#
+#zeroconf_enabled "yes"
+#
+# The service name to publish. This name should be unique on
+# your local network.
+#
+#zeroconf_name "Music Player"
+#
+################################################################
+
+
+########################## PERMISSIONS #########################
+#
+# MPD can require that users specify a password before using it.
+# You may specify one ore more here, along with what users who
+# log in with that password are allowed to do.
+#
+#password "password at read,add,control,admin"
+#
+# Specifies what permissions a user who has not logged in with a
+# password has. By default, all users have full access to MPD
+# if no password is specified above, or no access if one or
+# more passwords are specified.
+#
+#default_permissions "read,add,control,admin"
+#
+################################################################
+
+
+########################## AUDIO OUTPUT ########################
+#
+# MPD supports many audio output types, as well as playing
+# through multiple audio outputs at the same time. You can
+# specify one or more here. If you don't specify any, MPD will
+# automatically scan for a usable audio output.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs>
+# for examples of other audio outputs.
+#
+# An example of an ALSA output:
+#
+audio_output {
+ type "alsa"
+ name "My ALSA Device"
+# device "hw:0,0" # optional
+# format "44100:16:2" # optional
+}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+# device "/dev/dsp" # optional
+# format "44100:16:2" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+# user "source" # optional
+# description "My Stream Description" # optional
+# genre "jazz" # optional
+# public "no" # optional
+#}
+#
+# Force all decoded audio to be converted to this format before
+# being passed to the audio outputs.
+#
+#audio_output_format "44100:16:2"
+#
+# If MPD has been compiled with libsamplerate support, this
+# specifies the sample rate converter to use. Possible
+# values can be found in the mpd.conf man page or the
+# libsamplerate documentation.
+#
+#samplerate_converter "Fastest Sinc Interpolator"
+#
+################################################################
+
+
+############################# MIXER ############################
+#
+# MPD needs to know what mixer settings to change when you
+# adjust the volume. If you don't specify one here, MPD will
+# pick one based on which ones it was compiled with support for.
+#
+# An example for controlling an ALSA mixer:
+#
+# XXX I hope that this is good - maybe system-specific? (uzsolt)
+mixer_type "alsa"
+mixer_device "default"
+mixer_control "PCM"
+#
+# An example for controlling an OSS mixer:
+#
+#mixer_type "oss"
+#mixer_device "/dev/mixer"
+#mixer_control "PCM"
+#
+# If you want MPD to adjust the volume of audio sent to the
+# audio outputs, you can tell it to use the software mixer:
+#
+#mixer_type "software"
+#
+################################################################
+
+
+######################### NORMALIZATION ########################
+#
+# Specifies the type of ReplayGain to use. Can be "album" or
+# "track". ReplayGain will not be used if not specified. See
+# <http://www.replaygain.org> for more details.
+#
+#replaygain "album"
+#
+# Sets the pre-amp used for files that have ReplayGain tags.
+#
+#replaygain_preamp "0"
+#
+# Enable on the fly volume normalization. This will cause the
+# volume of all songs played to be adjusted so that they sound
+# as though they are of equal loudness.
+#
+#volume_normalization "no"
+#
+################################################################
+
+
+########################### BUFFERING ##########################
+#
+# The size of the buffer containing decoded audio. You probably
+# shouldn't change this.
+#
+#audio_buffer_size "2048"
+#
+# How much of the buffer to fill before beginning to play.
+# Increase this if you hear skipping when changing songs.
+#
+#buffer_before_play "10%"
+#
+# Similar options for the HTTP stream buffer. If you hear
+# skipping while playing HTTP streams, you may wish to increase
+# these.
+#
+#http_buffer_size "128"
+#http_prebuffer_size "25%"
+#
+################################################################
+
+
+########################### HTTP PROXY #########################
+#
+# Specifies the HTTP proxy to use for playing HTTP streams.
+#
+#http_proxy_host "proxy.isp.com"
+#http_proxy_port "8080"
+#http_proxy_user "user"
+#http_proxy_password "password"
+#
+################################################################
+
+
+############################# LIMITS ###########################
+#
+# These are various limits to prevent MPD from using too many
+# resources. You should only change them if they start
+# restricting your usage of MPD.
+#
+#connection_timeout "60"
+#max_connections "5"
+#max_playlist_length "16384"
+#max_command_list_size "2048"
+#max_output_buffer_size "8192"
+#
+################################################################
+
+
+###################### CHARACTER ENCODINGS #####################
+#
+# If file or directory names do not display correctly, then you
+# may need to change this. In most cases it should be either
+# "ISO-8859-1" or "UTF-8". You must recreate your database
+# after changing this (use mpd --create-db).
+#
+# XXX is this evident in 2008 and PLD? (uzsolt)
+filesystem_charset "UTF-8"
+#
+# The encoding that ID3v1 tags should be converted from.
+#
+#id3v1_encoding "ISO-8859-1"
+#
+################################################################
+
+
+######################### OTHER OPTIONS ########################
+#
+# Try disabling this if you have MP3s which appear to end
+# abruptly. If this solves the problem, it is highly
+# recommended that you fix your MP3s with vbrfix (available from
+# <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point you can re-enable support for gapless MP3 playback.
+#
+#gapless_mp3_playback "yes"
+#
+# Enable this if you wish to use your MPD created playlists in
+# other music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# A list of tag types that MPD will scan for and make available
+# to clients.
+#
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+################################################################
================================================================
More information about the pld-cvs-commit
mailing list