packages: ifenslave/ifenslave.spec, ifenslave/TODO (NEW), ifenslave/ifensla...
blues
blues at pld-linux.org
Thu Jul 2 17:32:15 CEST 2009
Author: blues Date: Thu Jul 2 15:32:15 2009 GMT
Module: packages Tag: HEAD
---- Log message:
- rel.2 - added debian patch with manual
---- Files affected:
packages/ifenslave:
ifenslave.spec (1.15 -> 1.16) , TODO (NONE -> 1.1) (NEW), ifenslave-debian.patch (NONE -> 1.1) (NEW)
---- Diffs:
================================================================
Index: packages/ifenslave/ifenslave.spec
diff -u packages/ifenslave/ifenslave.spec:1.15 packages/ifenslave/ifenslave.spec:1.16
--- packages/ifenslave/ifenslave.spec:1.15 Tue Feb 13 09:06:35 2007
+++ packages/ifenslave/ifenslave.spec Thu Jul 2 17:32:10 2009
@@ -4,16 +4,22 @@
Summary(pt_BR.UTF-8): Configura interfaces de rede para roteamento paralelo
Name: ifenslave
Version: 1.1.0
-Release: 1
+Release: 2
License: GPL
Group: Networking
Source0: %{name}.c
+Patch0: %{name}-debian.patch
BuildRoot: %{tmpdir}/%{name}-%{version}-root-%(id -u -n)
%define _sbindir /sbin
%description
-ifenslave configures network interfaces for parallel routing.
+Attach and detach slave interfaces to a bonding device. This is a tool to
+attach and detach slave network interfaces to a bonding device. A bonding
+device will act like a normal Ethernet network device to the kernel, but
+will send out the packets via the slave devices using a simple round-robin
+scheduler. This allows for simple load-balancing, identical to "channel
+bonding" or "trunking" techniques used in switches.
%description -l pl.UTF-8
ifenslave konfiguruje interfejsy sieciowe dla równoległego routingu.
@@ -22,20 +28,28 @@
ifenslave configura interfaces de rede para roteamento paralelo.
%prep
+%setup -Tc -q
+install %{SOURCE0} .
+%patch0 -p1
+
%build
-%{__cc} %{rpmcflags} -o %{name} %{SOURCE0}
+%{__cc} %{rpmcflags} -o %{name} %{name}.c
%install
rm -rf $RPM_BUILD_ROOT
-install -D %{name} $RPM_BUILD_ROOT%{_sbindir}/%{name}
+install -d $RPM_BUILD_ROOT{%{_sbindir},%{_mandir}/man8}
+
+install %{name} $RPM_BUILD_ROOT%{_sbindir}
+install ifenslave.8 $RPM_BUILD_ROOT%{_mandir}/man8
%clean
rm -fr $RPM_BUILD_ROOT
%files
%defattr(644,root,root,755)
-%attr(755,root,root) %{_sbindir}/ifenslave
+%attr(755,root,root) %{_sbindir}/%{name}
+%{_mandir}/man8/*.8*
%define date %(echo `LC_ALL="C" date +"%a %b %d %Y"`)
%changelog
@@ -43,6 +57,9 @@
All persons listed below can be reached at <cvs_login>@pld-linux.org
$Log$
+Revision 1.16 2009/07/02 15:32:10 blues
+- rel.2 - added debian patch with manual
+
Revision 1.15 2007/02/13 08:06:35 glen
- tabs in preamble
================================================================
Index: packages/ifenslave/TODO
diff -u /dev/null packages/ifenslave/TODO:1.1
--- /dev/null Thu Jul 2 17:32:15 2009
+++ packages/ifenslave/TODO Thu Jul 2 17:32:10 2009
@@ -0,0 +1,2 @@
+# TODO:
+- translate description
================================================================
Index: packages/ifenslave/ifenslave-debian.patch
diff -u /dev/null packages/ifenslave/ifenslave-debian.patch:1.1
--- /dev/null Thu Jul 2 17:32:15 2009
+++ packages/ifenslave/ifenslave-debian.patch Thu Jul 2 17:32:10 2009
@@ -0,0 +1,471 @@
+--- ifenslave-2.6-1.1.0.orig/ifenslave.8
++++ ifenslave-2.6-1.1.0/ifenslave.8
+@@ -0,0 +1,69 @@
++.Dd 2004-04-09
++.Dt IFENSLAVE 8
++.Os "Debian GNU/Linux"
++.\" Manual page created by Guus Sliepen <guus at debian.org>
++.Sh NAME
++.Nm ifenslave
++.Nd Attach and detach slave network devices to a bonding device.
++.Sh SYNOPSIS
++.Nm
++.Op Fl acdfhuvV
++.Op Fl -all-interfaces
++.Op Fl -change-active
++.Op Fl -detach
++.Op Fl -force
++.Op Fl -help
++.Op Fl -usage
++.Op Fl -verbose
++.Op Fl -version
++.Ar master
++.Ar slave
++.No ...
++.Sh DESCRIPTION
++.Nm
++is a tool to attach and detach slave network devices to a bonding device.
++A bonding device will act like a normal Ethernet network device to the kernel,
++but will send out the packets via the slave devices using a simple round-robin scheduler.
++This allows for simple load-balancing,
++identical to "channel bonding" or "trunking" techniques used in switches.
++.Pp
++The kernel must have support for bonding devices for
++.Nm
++to be useful.
++.Sh OPTIONS
++.Bl -tag -width indent
++.It Fl a, -all-interfaces
++Show information about all interfaces.
++.It Fl c, -change-active
++Change active slave.
++.It Fl d, -detach
++Removes slave interfaces from the bonding device.
++.It Fl f, -force
++Force actions to be taken if one of the specified interfaces appears not to belong to an Ethernet device.
++.It Fl h, -help
++Display a help message and exit.
++.It Fl u, -usage
++Show usage information and exit.
++.It Fl v, -verbose
++Print warning and debug messages.
++.It Fl V, -version
++Show version information and exit.
++.El
++If not options are given, the default action will be to enslave interfaces.
++.Sh EXAMPLE
++The following example shows how to setup a bonding device and
++enslave two real Ethernet devices to it:
++.Bd -literal
++# modprobe bonding
++# ifconfig bond0 192.168.0.1 netmask 255.255.0.0
++# ifenslave bond0 eth0 eth1
++.Ed
++.Sh AUTHOR
++.Nm
++was originally written by
++.An Donald Becker Aq becker at cesdis.gsfc.nasa.gov ,
++and has since been updated by various kernel developers.
++.Pp
++This manual page was written by
++.An Guus Sliepen Aq guus at debian.org
++for the Debian GNU/Linux system.
+--- ifenslave-2.6-1.1.0.orig/debian/changelog
++++ ifenslave-2.6-1.1.0/debian/changelog
+@@ -0,0 +1,79 @@
++ifenslave-2.6 (1.1.0-10) unstable; urgency=low
++
++ * Apply patch from Scott Barker forcing explicitly mentioned interfaces to
++ always be enslaved, even if they have been brought up already.
++ Closes: #471769
++
++ -- Guus Sliepen <guus at debian.org> Sun, 01 Jun 2008 18:11:36 +0200
++
++ifenslave-2.6 (1.1.0-9) unstable; urgency=low
++
++ * Apply patch from Nicolas de Pesloüan allowing multiple arguments to
++ bond_arp_ip_target and writing them properly to sysfs. Closes: #480749
++
++ -- Guus Sliepen <guus at debian.org> Mon, 19 May 2008 11:29:26 +0200
++
++ifenslave-2.6 (1.1.0-8) unstable; urgency=low
++
++ * Apply patch from Guido Guenther allowing bonding device options normally
++ available via the sysfs interface to be set in /etc/network/interfaces.
++ Closes: #456952
++
++ -- Guus Sliepen <guus at debian.org> Thu, 20 Dec 2007 14:07:01 +0100
++
++ifenslave-2.6 (1.1.0-7) unstable; urgency=low
++
++ * Move scripts from if-up and if-down to if-pre-up and if-post-down again,
++ but bring the bonding interface up in if-pre-up. Closes: #422566
++
++ -- Guus Sliepen <guus at debian.org> Tue, 08 May 2007 11:09:26 +0200
++
++ifenslave-2.6 (1.1.0-6) unstable; urgency=low
++
++ * Move scripts from if-pre-up and if-post-down to if-up and if-down.
++
++ -- Guus Sliepen <guus at debian.org> Mon, 17 Oct 2005 00:48:26 +0200
++
++ifenslave-2.6 (1.1.0-5) unstable; urgency=low
++
++ * Add if-pre-up and if-post-down scripts to enslave and detach interfaces.
++ Closes: #306993.
++
++ -- Guus Sliepen <guus at debian.org> Fri, 30 Sep 2005 14:33:46 +0200
++
++ifenslave-2.6 (1.1.0-4) unstable; urgency=medium
++
++ * Drop Conflict with kernel-image-2.4 and newer ifenslave-2.4 packages.
++ Closes: #270416
++ * Use alternatives to allow this package to coexist with ifenslave-2.4.
++ * Move ifenslave to /sbin to allow network to be properly configured
++ before mounting /usr over NFS. Closes: #257284
++
++ -- Guus Sliepen <guus at debian.org> Fri, 17 Sep 2004 14:01:36 +0200
++
++ifenslave-2.6 (1.1.0-3) unstable; urgency=low
++
++ * Conflict, Replace and Provide ifenslave. Closes: #255287
++
++ -- Guus Sliepen <guus at debian.org> Fri, 25 Jun 2004 21:35:31 +0000
++
++ifenslave-2.6 (1.1.0-2) unstable; urgency=low
++
++ * Change package name to reflect it only works with 2.6.x kernels.
++ See also #247844.
++
++ -- Guus Sliepen <guus at debian.org> Sun, 16 May 2004 12:26:06 +0200
++
++ifenslave (1.1.0-1) unstable; urgency=low
++
++ * New upstream release (kernel 2.6.5). Closes: #242670
++
++ -- Guus Sliepen <guus at debian.org> Fri, 9 Apr 2004 14:31:50 +0200
++
++ifenslave (0.07-1) unstable; urgency=low
++
++ * Initial release. Closes: #100760
++ * Merged with several patched versions of the same source.
++ * Created manpage.
++
++ -- Guus Sliepen <guus at sliepen.warande.net> Wed, 13 Jun 2001 09:31:56 +0200
+--- ifenslave-2.6-1.1.0.orig/debian/ifenslave-2.6.postinst
++++ ifenslave-2.6-1.1.0/debian/ifenslave-2.6.postinst
+@@ -0,0 +1,6 @@
++#!/bin/sh -e
++
++update-alternatives --install /sbin/ifenslave ifenslave /sbin/ifenslave-2.6 260 \
++ --slave /usr/share/man/man8/ifenslave.8.gz ifenslave.8.gz /usr/share/man/man8/ifenslave-2.6.8.gz
++
++#DEBHELPER#
+--- ifenslave-2.6-1.1.0.orig/debian/ifenslave-2.6.prerm
++++ ifenslave-2.6-1.1.0/debian/ifenslave-2.6.prerm
+@@ -0,0 +1,8 @@
++#!/bin/sh -e
++
++if [ "$1" = remove ] || [ "$1" = deconfigure ]; then
++ update-alternatives --remove ifenslave /sbin/ifenslave-2.6
++fi
++
++
++#DEBHELPER#
+--- ifenslave-2.6-1.1.0.orig/debian/README.debian
++++ ifenslave-2.6-1.1.0/debian/README.debian
+@@ -0,0 +1,32 @@
++ifenslave for Debian
++----------------------
++
++The ifenslave program distributed with the Linux kernel sources has not always
++been up to date, and several modified versions have been floating around. The
++latest kernels now contain an updated version though. The Debian package
++ifenslave will now use the version found in the kernel, without any patches.
++
++You can also enslave interfaces using Debian's /etc/network/interfaces file,
++like this:
++
++iface bond0 inet static
++ address 192.168.48.157
++ netmask 255.255.252.0
++ broadcast 192.168.48.255
++ gateway 192.168.48.1
++ slaves eth0 eth1
++
++The "slaves" option can take a list of network interfaces, the keyword "none"
++(with obvious results) and the keyword "all" (which selects all interfaces with
++"eth" in their name). Additionally you can set bonding options by adding them
++to the interface section:
++
++ bond_mode active-backup
++ bond_primary eth0
++
++This would run the bonding device in active backup mode with eth0 as primary.
++Supported options are bond_mode, bond_miimon, bond_primary, bond_updelay,
++bond_downdelay, bond_arp_ip_target, bond_arp_interval, bond_xmit_hash_policy
++and bond_lacp_rate.
++
++Guus Sliepen <guus at debian.org>, Fri, 30 Sep 2005 14:33:06 +0200
+--- ifenslave-2.6-1.1.0.orig/debian/pre-up
++++ ifenslave-2.6-1.1.0/debian/pre-up
+@@ -0,0 +1,82 @@
++#!/bin/sh
++
++IFENSLAVE=/sbin/ifenslave
++IFSTATE=/etc/network/run/ifstate
++BOND_PARAMS=/sys/class/net/"$IFACE"/bonding/
++
++if [ ! -x $IFENSLAVE ] ; then
++ exit 0
++fi
++
++
++add_master()
++{
++ if [ ! -r /sys/class/net/bonding_masters ]; then
++ modprobe bonding >/dev/null 2>&1 || true
++ fi
++
++ if ! grep -sq "\\<$IFACE\\>" /sys/class/net/bonding_masters; then
++ echo "+$IFACE" > /sys/class/net/bonding_masters
++ fi
++}
++
++
++case "$IF_SLAVES" in
++ "")
++ exit 0
++ ;;
++ none)
++ INTERFACES=""
++ ;;
++ all)
++ INTERFACES=`grep eth /proc/net/dev|sed 's/\(\ *\)\(eth[^:]*\)\(.*\)/\2/'`
++ AUTOIF="yes"
++ ;;
++ *)
++ INTERFACES="$IF_SLAVES"
++ ;;
++esac
++
++
++if [ -n "$INTERFACES" ] ; then
++ add_master
++
++ if [ "$IF_BOND_MODE" ]; then
++ echo "$IF_BOND_MODE" > $BOND_PARAMS/mode
++ fi
++ if [ "$IF_BOND_MIIMON" ]; then
++ echo "$IF_BOND_MIIMON" > $BOND_PARAMS/miimon
++ fi
++ if [ "$IF_BOND_UPDELAY" ]; then
++ echo "$IF_BOND_UPDELAY" > $BOND_PARAMS/updelay
++ fi
++ if [ "$IF_BOND_DOWNDELAY" ]; then
++ echo "$IF_BOND_DOWNDELAY" > $BOND_PARAMS/downdelay
++ fi
++ if [ "$IF_BOND_ARP_IP_TARGET" ]; then
++ for target in $IF_BOND_ARP_IP_TARGET; do
++ echo "+$target" > $BOND_PARAMS/arp_ip_target
++ done
++ fi
++ if [ "$IF_BOND_ARP_INTERVAL" ]; then
++ echo "$IF_BOND_ARP_INTERVAL" > $BOND_PARAMS/arp_interval
++ fi
++ if [ "$IF_BOND_XMIT_HASH_POLICY" ]; then
++ echo "$IF_BOND_XMIT_HASH_POLICY" > $BOND_PARAMS/xmit_hash_policy
++ fi
++ if [ "$IF_BOND_LACP_RATE" ]; then
++ echo "$IF_BOND_LACP_RATE" > $BOND_PARAMS/lacp_rate
++ fi
++ ifconfig "$IFACE" up
++ for slave in $INTERFACES ; do
++ if ( [ "$AUTOIF" ] && grep -q "^$slave=" $IFSTATE ) ; then
++ echo "Not enslaving interface $slave since it is already configured"
++ else
++ ifconfig "$slave" down
++ $IFENSLAVE "$IFACE" "$slave"
++ fi
++ done
++ if [ "$IF_BOND_PRIMARY" ]; then
++ echo "$IF_BOND_PRIMARY" > $BOND_PARAMS/primary
++ fi
++fi
+--- ifenslave-2.6-1.1.0.orig/debian/post-down
++++ ifenslave-2.6-1.1.0/debian/post-down
+@@ -0,0 +1,31 @@
++#!/bin/sh
++
++IFENSLAVE=/sbin/ifenslave
++IFSTATE=/etc/network/run/ifstate
++
++if [ ! -x $IFENSLAVE ] ; then
++ exit 0
++fi
++
++case "$IF_SLAVES" in
++ "")
++ exit 0
++ ;;
++ none)
++ INTERFACES=""
++ ;;
++ all)
++ INTERFACES=`grep eth /proc/net/dev|sed 's/\(\ *\)\(eth[^:]*\)\(.*\)/\2/'`
++ ;;
++ *)
++ INTERFACES="$IF_SLAVES"
++ ;;
++esac
++
++if [ -n "$INTERFACES" ] ; then
++ ifconfig "$IFACE" up
++ for slave in $INTERFACES ; do
++ $IFENSLAVE --detach "$IFACE" "$slave"
++ done
++ ifconfig "$IFACE" down
++fi
+--- ifenslave-2.6-1.1.0.orig/debian/compat
++++ ifenslave-2.6-1.1.0/debian/compat
+@@ -0,0 +1 @@
++4
+--- ifenslave-2.6-1.1.0.orig/debian/rules
++++ ifenslave-2.6-1.1.0/debian/rules
+@@ -0,0 +1,79 @@
++#!/usr/bin/make -f
++# Sample debian/rules that uses debhelper.
++# GNU copyright 1997 to 1999 by Joey Hess.
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++configure: configure-stamp
++configure-stamp:
++ dh_testdir
++ touch configure-stamp
++
++build: configure-stamp build-stamp
++build-stamp:
++ dh_testdir
++
++ gcc -O2 -g -Wall -o ifenslave ifenslave.c
++
++ touch build-stamp
++
++clean:
++ dh_testdir
++ dh_testroot
++ rm -f build-stamp configure-stamp
++
++ rm -f ifenslave
++
++ dh_clean
++
++install: build
++ dh_testdir
++ dh_testroot
++ dh_clean -k
++ dh_installdirs
++
++ mkdir -p $(CURDIR)/debian/ifenslave-2.6/sbin/
++ mkdir -p $(CURDIR)/debian/ifenslave-2.6/usr/share/man/man8/
++ cp ifenslave $(CURDIR)/debian/ifenslave-2.6/sbin/ifenslave-2.6
++ cp ifenslave.8 $(CURDIR)/debian/ifenslave-2.6/usr/share/man/man8/ifenslave-2.6.8
++ install -D debian/pre-up $(CURDIR)/debian/ifenslave-2.6/etc/network/if-pre-up.d/ifenslave
++ install -D debian/post-down $(CURDIR)/debian/ifenslave-2.6/etc/network/if-post-down.d/ifenslave
++
++
++# Build architecture-independent files here.
++binary-indep: build install
++# We have nothing to do by default.
++
++# Build architecture-dependent files here.
++binary-arch: build install
++ dh_testdir
++ dh_testroot
++# dh_installdebconf
++ dh_installdocs
++# dh_installexamples
++# dh_installmenu
++# dh_installlogrotate
++# dh_installemacsen
++# dh_installpam
++# dh_installmime
++# dh_installinit
++# dh_installcron
++ dh_installman
++# dh_installinfo
++# dh_undocumented
++ dh_installchangelogs
++ dh_link
++ dh_strip
++ dh_compress
++ dh_fixperms
++# dh_makeshlibs
++ dh_installdeb
++# dh_perl
++ dh_shlibdeps
++ dh_gencontrol
++ dh_md5sums
++ dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary install configure
+--- ifenslave-2.6-1.1.0.orig/debian/ifenslave-2.6.preinst
++++ ifenslave-2.6-1.1.0/debian/ifenslave-2.6.preinst
+@@ -0,0 +1,11 @@
++#!/bin/sh -e
++
++if [ -f /etc/network/if-up.d/ifenslave -a ! -e /etc/network/if-pre-up.d/ifenslave ]; then
++ mv /etc/network/if-up.d/ifenslave /etc/network/if-pre-up.d/ifenslave
++fi
++
++if [ -f /etc/network/if-down.d/ifenslave -a ! -e /etc/network/if-post-down.d/ifenslave ]; then
++ mv /etc/network/if-down.d/ifenslave /etc/network/if-post-down.d/ifenslave
++fi
++
++#DEBHELPER#
+--- ifenslave-2.6-1.1.0.orig/debian/control
++++ ifenslave-2.6-1.1.0/debian/control
+@@ -0,0 +1,22 @@
++Source: ifenslave-2.6
++Section: net
++Priority: optional
++Maintainer: Guus Sliepen <guus at debian.org>
++Build-Depends: debhelper (>> 4.0.0)
++Standards-Version: 3.7.3
++
++Package: ifenslave-2.6
++Architecture: any
++Depends: ${shlibs:Depends}
++Recommends: net-tools
++Conflicts: ifenslave (<< 2), ifenslave-2.4 (<= 0.07+2.5.15-6)
++Description: Attach and detach slave interfaces to a bonding device
++ This is a tool to attach and detach slave network interfaces to a bonding
++ device. A bonding device will act like a normal Ethernet network device to
++ the kernel, but will send out the packets via the slave devices using a simple
++ round-robin scheduler. This allows for simple load-balancing, identical to
++ "channel bonding" or "trunking" techniques used in switches.
++ .
++ The kernel must have support for bonding devices for ifenslave to be useful.
++ This package supports 2.6.x kernels and the most recent 2.4.x kernels. For
++ older kernels use the ifenslave-2.4 package.
+--- ifenslave-2.6-1.1.0.orig/debian/copyright
++++ ifenslave-2.6-1.1.0/debian/copyright
+@@ -0,0 +1,15 @@
++This package was debianized by Guus Sliepen <guus at debian.org> on
++Wed, 13 Jun 2001 09:31:56 +0200.
++
++There have been several version of ifenslave circulating around in the past.
++For this Debian package, the source was taken from the Documentation directory
++of the Linux 2.6 kernel sources.
++
++ Copyright (c) 1994-1996 Donald Becker <becker at cesdis.gsfc.nasa.gov>
++
++ This program is free software; you can redistribute it
++ and/or modify it under the terms of the GNU General Public
++ License as published by the Free Software Foundation.
++
++On Debian GNU/Linux systems, the complete text of the GNU General Public
++License version 2 can be found in /usr/share/common-licenses/GPL-2.
================================================================
---- CVS-web:
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/packages/ifenslave/ifenslave.spec?r1=1.15&r2=1.16&f=u
More information about the pld-cvs-commit
mailing list