packages: cdrtools/cdrtools-config.patch - adjusted for a75
amateja
amateja at pld-linux.org
Mon Feb 8 14:39:24 CET 2010
Author: amateja Date: Mon Feb 8 13:39:24 2010 GMT
Module: packages Tag: HEAD
---- Log message:
- adjusted for a75
---- Files affected:
packages/cdrtools:
cdrtools-config.patch (1.12 -> 1.13)
---- Diffs:
================================================================
Index: packages/cdrtools/cdrtools-config.patch
diff -u packages/cdrtools/cdrtools-config.patch:1.12 packages/cdrtools/cdrtools-config.patch:1.13
--- packages/cdrtools/cdrtools-config.patch:1.12 Tue Jan 12 08:18:47 2010
+++ packages/cdrtools/cdrtools-config.patch Mon Feb 8 14:39:18 2010
@@ -1,50 +1,6 @@
-diff -ruN cdrtools-2.0-/cdrecord/README.ATAPI cdrtools-2.0/cdrecord/README.ATAPI
---- cdrtools-2.0-/cdrecord/README.ATAPI Tue Dec 24 17:37:35 2002
-+++ cdrtools-2.0/cdrecord/README.ATAPI Thu Dec 26 18:25:53 2002
-@@ -462,14 +462,14 @@
- ln -s scd1 cdrw # NOTE: see above, maybe cdrom
- Check the new SCSI settings:
- cdrecord -scanbus
-- Setup cdrecord's environment - edit /etc/default/cdrecord:
-+ Setup cdrecord's environment - edit /etc/cdrecord.conf:
- CDR_DEVICE=cdrw
- cdrw=1,0,0 4 8m
- cdrom=1,2,0 0 0m
- Input the right values, the fields are described in the manpage
- of cdrecord. Alternatively, you may use this values as
- cdrecord-parameter or take a frontend with an own configuration
-- scheme, then you don't need to modify /etc/default/cdrecord.
-+ scheme, then you don't need to modify /etc/cdrecord.conf
- 9. It's done! Insert a CD and try "cdrecord -v -toc"
- /*--------------------------------------------------------------------------*/
- He had constant buffer underrun problems:
-diff -ruN cdrtools-2.0-/README.openserver cdrtools-2.0/README.openserver
---- cdrtools-2.0-/README.openserver Tue Jan 25 17:37:48 2000
-+++ cdrtools-2.0/README.openserver Thu Dec 26 18:25:53 2002
-@@ -55,7 +55,7 @@
- ===================================================================
- THE OLD ADDRESSING IS NO LONGER AVAILABLE!
-
-- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
-+ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
- ===================================================================
-
- Running cdrecord with the old address method will result in an error!
-diff -ruN cdrtools-2.0-/README.unixware cdrtools-2.0/README.unixware
---- cdrtools-2.0-/README.unixware Sun Mar 4 00:41:43 2001
-+++ cdrtools-2.0/README.unixware Thu Dec 26 18:25:53 2002
-@@ -64,7 +64,7 @@
- ===================================================================
- THE OLD ADDRESSING IS NO LONGER AVAILABLE!
-
-- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
-+ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
- ===================================================================
-
- Running cdrecord with the old address method will result in an error!
-diff -ruN cdrtools-2.0/cdrecord/cdrecord.1.orig cdrtools-2.0/cdrecord/cdrecord.1
---- cdrtools-2.0/cdrecord/cdrecord.1.orig 2010-01-03 22:32:07.000000000 +0100
-+++ cdrtools-2.0/cdrecord/cdrecord.1 2010-01-05 08:57:54.000000000 +0100
+diff -urN cdrtools-2.01.01.orig/cdrecord/cdrecord.1 cdrtools-2.01.01/cdrecord/cdrecord.1
+--- cdrtools-2.01.01.orig/cdrecord/cdrecord.1 2010-01-31 22:09:45.000000000 +0100
++++ cdrtools-2.01.01/cdrecord/cdrecord.1 2010-02-08 14:15:04.000000000 +0100
@@ -71,7 +71,7 @@
explained below refers to
.IR scsibus / target / lun
@@ -54,7 +10,7 @@
.B dev=
option may also be a drive name label in said file (see FILES section).
-@@ -1199,13 +1199,13 @@
+@@ -1201,13 +1201,13 @@
option is present,
.B cdrecord
will try to get a drive specific speed value from the file
@@ -70,7 +26,7 @@
If no speed value could be found, cdrecord uses a drive specific default speed.
The default for all new (MMC compliant) drives is to use the maximum supported by the drive.
If you use
-@@ -1499,7 +1499,7 @@
+@@ -1505,7 +1505,7 @@
.B CDR_DEVICE
environment.
.sp
@@ -79,7 +35,7 @@
if the argument to the
.B dev=
option
-@@ -1508,7 +1508,7 @@
+@@ -1514,7 +1514,7 @@
environment
does not contain the characters ',', '/', '@' or ':',
it is interpreted as a device label name that was defined in the file
@@ -88,7 +44,7 @@
.sp
.B \h'-2m'Autotarget Mode
.br
-@@ -2152,7 +2152,7 @@
+@@ -2158,7 +2158,7 @@
.TP
.B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
@@ -97,7 +53,7 @@
.TP
.B CDR_SPEED
Sets the default speed value for writing (see also
-@@ -2220,8 +2220,11 @@
+@@ -2226,8 +2226,11 @@
.SH FILES
.TP
@@ -111,27 +67,27 @@
For example:
.SM CDR_FIFOSIZE=8m
or
-@@ -2230,7 +2233,7 @@
+@@ -2236,7 +2239,7 @@
.TP
- CDR_DEVICE
+ .B CDR_DEVICE
This may either hold a device identifier that is suitable to the open
-call of the SCSI transport library or a label in the file /etc/default/cdrecord
+call of the SCSI transport library or a label in the file /etc/cdrecord.conf
that allows to identify a specific drive on the system.
.TP
- CDR_SPEED
-diff -ruN cdrtools-2.0-/cdrecord/cdrecord.dfl cdrtools-2.0/cdrecord/cdrecord.dfl
---- cdrtools-2.0-/cdrecord/cdrecord.dfl Sun Jul 7 23:56:21 2002
-+++ cdrtools-2.0/cdrecord/cdrecord.dfl Thu Dec 26 18:25:53 2002
+ .B CDR_SPEED
+diff -urN cdrtools-2.01.01.orig/cdrecord/cdrecord.dfl cdrtools-2.01.01/cdrecord/cdrecord.dfl
+--- cdrtools-2.01.01.orig/cdrecord/cdrecord.dfl 2008-12-30 14:29:50.000000000 +0100
++++ cdrtools-2.01.01/cdrecord/cdrecord.dfl 2010-02-08 14:15:04.000000000 +0100
@@ -1,6 +1,6 @@
- #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
+ #ident @(#)cdrecord.dfl 1.7 08/12/30 Copyr 1998 J. Schilling
#
-# This file is /etc/default/cdrecord
+# This file is /etc/cdrecord.conf
# It contains defaults that are used if no command line option
# or environment is present.
#
-@@ -14,7 +14,7 @@
+@@ -19,7 +19,7 @@
# Note that newer cdrecord versions do not default
# to speed=1. For MMC compliant drives, the default
# is to write at maximum speed, so it in general does
@@ -140,10 +96,195 @@
#
#CDR_SPEED=40
-diff -ruN cdrtools-2.0-/libcdrdeflt/cdrdeflt.c cdrtools-2.0/libcdrdeflt/cdrdeflt.c
---- cdrtools-2.0-/libcdrdeflt/cdrdeflt.c Wed Aug 14 19:52:00 2002
-+++ cdrtools-2.0/libcdrdeflt/cdrdeflt.c Thu Dec 26 18:25:53 2002
-@@ -53,7 +53,7 @@
+diff -urN cdrtools-2.01.01.orig/cdrecord/README.ATAPI cdrtools-2.01.01/cdrecord/README.ATAPI
+--- cdrtools-2.01.01.orig/cdrecord/README.ATAPI 2008-10-12 21:08:13.000000000 +0200
++++ cdrtools-2.01.01/cdrecord/README.ATAPI 2010-02-08 14:15:04.000000000 +0100
+@@ -512,14 +512,14 @@
+ ln -s scd1 cdrw # NOTE: see above, maybe cdrom
+ Check the new SCSI settings:
+ cdrecord -scanbus
+- Setup cdrecord's environment - edit /etc/default/cdrecord:
++ Setup cdrecord's environment - edit /etc/cdrecord.conf:
+ CDR_DEVICE=cdrw
+ cdrw=1,0,0 4 8m
+ cdrom=1,2,0 0 0m
+ Input the right values, the fields are described in the manpage
+ of cdrecord. Alternatively, you may use this values as
+ cdrecord-parameter or take a frontend with an own configuration
+- scheme, then you don't need to modify /etc/default/cdrecord.
++ scheme, then you don't need to modify /etc/cdrecord.conf
+ 9. It's done! Insert a CD and try "cdrecord -v -toc"
+ /*--------------------------------------------------------------------------*/
+ He had constant buffer underrun problems:
+diff -urN cdrtools-2.01.01.orig/doc/cdrecord.man cdrtools-2.01.01/doc/cdrecord.man
+--- cdrtools-2.01.01.orig/doc/cdrecord.man 2010-01-31 22:56:01.000000000 +0100
++++ cdrtools-2.01.01/doc/cdrecord.man 2010-02-08 14:18:18.000000000 +0100
+@@ -32,7 +32,7 @@
+
+ The _d_e_v_i_c_e parameter to the ddeevv== option explained below
+ refers to _s_c_s_i_b_u_s/_t_a_r_g_e_t/_l_u_n of the CD/DVD/BluRay-Recorder.
+- If a file /etc/default/cdrecord exists, the parameter to the
++ If a file /etc/cdrecord.conf exists, the parameter to the
+ ddeevv== option may also be a drive name label in said file (see
+ FILES section).
+
+@@ -1422,11 +1422,11 @@
+ If no _d_e_v option is present, ccddrreeccoorrdd will try to get
+ the device from the CCDDRR__DDEEVVIICCEE environment.
+
+- If a file /etc/default/cdrecord exists, and if the
++ If a file /etc/cdrecord.conf exists, and if the
+ argument to the ddeevv== option or the CCDDRR__DDEEVVIICCEE environ-
+ ment does not contain the characters ',', '/', '@' or
+ ':', it is interpreted as a device label name that was
+- defined in the file /etc/default/cdrecord (see FILES
++ defined in the file /etc/cdrecord.conf (see FILES
+ section).
+
+ AAuuttoottaarrggeett MMooddee
+@@ -2078,7 +2078,7 @@
+ CCDDRR__DDEEVVIICCEE
+ This may either hold a device identifier that is suit-
+ able to the open call of the SCSI transport library or
+- a label in the file /etc/default/cdrecord.
++ a label in the file /etc/cdrecord.conf.
+
+ CCDDRR__SSPPEEEEDD
+ Sets the default speed value for writing (see also
+@@ -2143,14 +2143,14 @@
+ FFIILLEESS
+ //eettcc//ddeeffaauulltt//ccddrreeccoorrdd
+ Default values can be set for the following options in
+- /etc/default/cdrecord. For example: CDR_FIFOSIZE=8m
++ /etc/cdrecord.conf. For example: CDR_FIFOSIZE=8m
+ or CDR_SPEED=2
+
+ CCDDRR__DDEEVVIICCEE
+ This may either hold a device identifier that is
+ suitable to the open call of the SCSI transport
+ library or a label in the file
+- /etc/default/cdrecord that allows to identify a
++ /etc/cdrecord.conf that allows to identify a
+ specific drive on the system.
+
+ CCDDRR__SSPPEEEEDD
+diff -urN cdrtools-2.01.01.orig/doc/cdrecord.ps cdrtools-2.01.01/doc/cdrecord.ps
+--- cdrtools-2.01.01.orig/doc/cdrecord.ps 2010-01-31 22:55:49.000000000 +0100
++++ cdrtools-2.01.01/doc/cdrecord.ps 2010-02-08 14:24:23.000000000 +0100
+@@ -341,7 +341,7 @@
+ (lun)4915 2952 w
+ 10 R f
+ (of the)1 281 1 5119 2952 t
+-( the)1 161( a \256le /etc/default/cdrecord exists, the parameter to)7 2128(CD/DVD/BluRay-Recorder. If)1 1279 3 1080 3072 t
++( the)1 161( a \256le /etc/cdrecord.conf exists, the parameter to)7 2128(CD/DVD/BluRay-Recorder. If)1 1279 3 1080 3072 t
+ 10 B f
+ ( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 4687 3072 t
+ 10 R f
+@@ -3329,7 +3329,7 @@
+ ( E)1 0( CE)1 67( IC)1 72( VI)1 39( EV)1 72(D DE)1 139 6 5011 2640 t
+ 10 R f
+ (environment.)1440 2760 w
+-( the argument to the)4 1007(If a \256le /etc/default/cdrecord exists, and if)6 1977 2 1440 3000 t
++( the argument to the)4 1007(If a \256le /etc/cdrecord.conf exists, and if)6 1977 2 1440 3000 t
+ 10 B f
+ ( =)1 0( v=)1 57( ev)1 50(d de)1 100 4 4501 3000 t
+ 10 R f
+@@ -3346,7 +3346,7 @@
+ (@)4333 3120 w
+ 10 R f
+ (' or ':', it is interpreted)5 975 1 4425 3120 t
+-(as a device label name that was de\256ned in the \256le /etc/default/cdrecord \(see FILES section\).)14 3779 1 1440 3240 t
++(as a device label name that was de\256ned in the \256le /etc/cdrecord.conf \(see FILES section\).)14 3779 1 1440 3240 t
+ 10 B f
+ ( e)1 0( de)1 44( od)1 56( Mo)1 50( M)1 127( t)1 0( et)1 33( ge)1 44( rg)1 50( ar)1 44( ta)1 50( ot)1 33( to)1 50( ut)1 33(A Au)1 128 15 1240 3480 t
+ 10 R f
+@@ -4755,7 +4755,7 @@
+ ( E)1 0( CE)1 67( IC)1 72( VI)1 39( EV)1 72(D DE)1 139 6 1346 2496 t
+ 10 R f
+ ( call of the SCSI transport)5 1126(This may either hold a device identi\256er that is suitable to the open)12 2834 2 1440 2616 t
+-(library or a label in the \256le /etc/default/cdrecord.)7 1996 1 1440 2736 t
++(library or a label in the \256le /etc/cdrecord.conf.)7 1996 1 1440 2736 t
+ 10 B f
+ (C CD DR R)3 216 1 1080 2904 t
+ 10 S f
+@@ -4891,7 +4891,7 @@
+ 10 B f
+ ( d)1 0( rd)1 56( or)1 44( re ec co)3 138( dr)1 44( cd)1 56( /c)1 44( t/)1 28( lt)1 33( ul)1 28( au)1 56( fa)1 50( ef)1 33( de)1 44( /d)1 56( c/)1 28( tc)1 44( et)1 33(/ /e)1 72 19 1080 6672 t
+ 10 R f
+-( example:)1 423( For)1 229( /etc/default/cdrecord.)1 907(Default values can be set for the following options in)9 2401 4 1440 6792 t
++( example:)1 423( For)1 229( /etc/cdrecord.conf.)1 907(Default values can be set for the following options in)9 2401 4 1440 6792 t
+ 9 R f
+ (CDR)1440 6912 w
+ 9 S f
+@@ -4931,7 +4931,7 @@
+ (\302)976 480 w
+ 10 R f
+ ( \( 1 \))3 164( CDRECORD)1 3277(s USER COMMANDS)2 950 3 1009 480 t
+-( identify a)2 455(transport library or a label in the \256le /etc/default/cdrecord that allows to)11 3145 2 1800 960 t
++( identify a)2 455(transport library or a label in the \256le /etc/cdrecord.conf that allows to)11 3145 2 1800 960 t
+ (speci\256c drive on the system.)4 1167 1 1800 1080 t
+ 10 B f
+ (C CD DR R)3 216 1 1440 1248 t
+diff -urN cdrtools-2.01.01.orig/doc/readcd.man cdrtools-2.01.01/doc/readcd.man
+--- cdrtools-2.01.01.orig/doc/readcd.man 2010-01-29 23:52:16.000000000 +0100
++++ cdrtools-2.01.01/doc/readcd.man 2010-02-08 14:26:27.000000000 +0100
+@@ -28,7 +28,7 @@
+
+ The _d_e_v_i_c_e parameter to the ddeevv== option explained below
+ refers to _s_c_s_i_b_u_s/_t_a_r_g_e_t/_l_u_n of the CD/DVD/BluRay-Recorder.
+- If a file /etc/default/cdrecord exists, the parameter to the
++ If a file /etc/cdrecord.conf exists, the parameter to the
+ ddeevv== option may also be a drive name label in said file (see
+ FILES section).
+
+@@ -351,11 +351,11 @@
+ If no _d_e_v option is present, rreeaaddccdd will try to get the
+ device from the CCDDRR__DDEEVVIICCEE environment.
+
+- If a file /etc/default/cdrecord exists, and if the
++ If a file /etc/cdrecord.conf exists, and if the
+ argument to the ddeevv== option or the CCDDRR__DDEEVVIICCEE environ-
+ ment does not contain the characters ',', '/', '@' or
+ ':', it is interpreted as a device label name that was
+- defined in the file /etc/default/cdrecord (see FILES
++ defined in the file /etc/cdrecord.conf (see FILES
+ section).
+
+ AAuuttoottaarrggeett MMooddee
+diff -urN cdrtools-2.01.01.orig/doc/readcd.ps cdrtools-2.01.01/doc/readcd.ps
+--- cdrtools-2.01.01.orig/doc/readcd.ps 2010-01-29 23:57:11.000000000 +0100
++++ cdrtools-2.01.01/doc/readcd.ps 2010-02-08 14:29:09.000000000 +0100
+@@ -330,7 +330,7 @@
+ (lun)4915 2832 w
+ 10 R f
+ (of the)1 281 1 5119 2832 t
+-( the)1 161( a \256le /etc/default/cdrecord exists, the parameter to)7 2128(CD/DVD/BluRay-Recorder. If)1 1279 3 1080 2952 t
++( the)1 161( a \256le /etc/cdrecord.conf exists, the parameter to)7 2128(CD/DVD/BluRay-Recorder. If)1 1279 3 1080 2952 t
+ 10 B f
+ (dev=)4687 2952 w
+ 10 R f
+@@ -1192,7 +1192,7 @@
+ 10 R f
+ (environ-)5062 3000 w
+ (ment.)1440 3120 w
+-( the argument to the)4 1007(If a \256le /etc/default/cdrecord exists, and if)6 1977 2 1440 3360 t
++( the argument to the)4 1007(If a \256le /etc/cdrecord.conf exists, and if)6 1977 2 1440 3360 t
+ 10 B f
+ (dev=)4501 3360 w
+ 10 R f
+@@ -1209,7 +1209,7 @@
+ (@)4333 3480 w
+ 10 R f
+ (' or ':', it is interpreted)5 975 1 4425 3480 t
+-(as a device label name that was de\256ned in the \256le /etc/default/cdrecord \(see FILES section\).)14 3779 1 1440 3600 t
++(as a device label name that was de\256ned in the \256le /etc/cdrecord.conf \(see FILES section\).)14 3779 1 1440 3600 t
+ 10 B f
+ (Autotarget Mode)1 742 1 1240 3840 t
+ 10 R f
+diff -urN cdrtools-2.01.01.orig/libcdrdeflt/cdrdeflt.c cdrtools-2.01.01/libcdrdeflt/cdrdeflt.c
+--- cdrtools-2.01.01.orig/libcdrdeflt/cdrdeflt.c 2009-07-10 23:57:18.000000000 +0200
++++ cdrtools-2.01.01/libcdrdeflt/cdrdeflt.c 2010-02-08 14:15:04.000000000 +0100
+@@ -49,7 +49,7 @@
* don't contribute work and don't give support, they are causing extra
* work for me and this way slow down the cdrecord development.
*/
@@ -152,167 +293,9 @@
}
EXPORT void
-diff -ruN cdrtools-2.0-/doc/cdrecord.man cdrtools-2.0/doc/cdrecord.man
---- cdrtools-2.0-/doc/cdrecord.man Tue Dec 24 16:54:52 2002
-+++ cdrtools-2.0/doc/cdrecord.man Thu Dec 26 18:28:09 2002
-@@ -67,7 +67,7 @@
- try the --ssccaannbbuuss option of ccddrreeccoorrdd described below.
-
-
-- If a file /etc/default/cdrecord exists, the parameter to
-+ If a file /etc/cdrecord.conf exists, the parameter to
- the ddeevv== option may also be a drive name label in said
- file (see FILES section).
-
-@@ -438,7 +438,7 @@
- If the argument to the ddeevv== option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.conf (see FILES section).
-
- ggrraacceettiimmee==_#
- Set the grace time before starting to write to _#
-@@ -1057,7 +1057,7 @@
- This may either hold a device identifier that is
- suitable to the open call of the SCSI transport
- library or a label in the file
-- /etc/default/cdrecord.
-+ /etc/cdrecord.conf
-
- CCDDRR__SSPPEEEEDD
- Sets the default speed value for writing (see also
-@@ -1096,16 +1096,16 @@
-
-
- FFIILLEESS
-- /etc/default/cdrecord
-+ /etc/cdrecord.conf
- Default values can be set for the following options
-- in /etc/default/cdrecord. For example: CDR_FIFOS-
-+ in /etc/cdrecord.conf For example: CDR_FIFOS-
- IZE=8m or CDR_SPEED=2
-
- CDR_DEVICE
- This may either hold a device identifier
- that is suitable to the open call of the
- SCSI transport library or a label in the
-- file /etc/default/cdrecord that allows to
-+ file /etc/cdrecord.conf that allows to
- identify a specific drive on the system.
-
- CDR_SPEED
-diff -ruN cdrtools-2.0-/doc/cdrecord.ps cdrtools-2.0/doc/cdrecord.ps
---- cdrtools-2.0-/doc/cdrecord.ps Tue Dec 24 16:55:27 2002
-+++ cdrtools-2.0/doc/cdrecord.ps Thu Dec 26 18:26:59 2002
-@@ -290,7 +290,7 @@
- (,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
- (\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 525.6
- Q(ecord)-.18 E F0(described belo)2.5 E -.65(w.)-.25 G .114
--(If a \214le /etc/def)108 554.4 R .114(ault/cdrecord e)-.1 F .115
-+(If a \214le /etc/cdr)108 554.4 R .114(ecord.conf e)-.1 F .115
- (xists, the parameter to the)-.15 F F2(de)2.615 E(v=)-.15 E F0 .115
- (option may also be a dri)2.615 F .415 -.15(ve n)-.25 H .115
- (ame label in said).15 F(\214le \(see FILES section\).)108 566.4 Q(On)
-@@ -749,8 +749,8 @@
- 556.8 R 1.047(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
- (option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144
--568.8 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(gracetime=)108
-+(preted as an label name that may be found in the \214le /etc/cdr)144
-+568.8 Q(ecord.conf \(see FILES section\).)-.1 E F2(gracetime=)108
- 585.6 Q F1(#).48 E F0(Set the grace time before starting to write to)144
- 597.6 Q F1(#)2.5 E F0 2.5(seconds. V)3.4 F(alues belo)-1.11 E 2.5(w2s)
- -.25 G(econds are not allo)-2.5 E(wed.)-.25 E F2(timeout=)108 614.4 Q F1
-@@ -1430,8 +1430,8 @@
- G(nstead.)-2.5 E/F3 10.95/Times-Bold at 0 SF(ENVIR)72 309.6 Q(ONMENT)-.329
- E F2(CDR_DEVICE)108 321.6 Q F0 1.628(This may either hold a de)144 333.6
- R 1.628(vice identi\214er that is suitable to the open call of the SCSI\
-- transport)-.25 F(library or a label in the \214le /etc/def)144 345.6 Q
--(ault/cdrecord.)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
-+ transport)-.25 F(library or a label in the \214le /etc/cdr)144 345.6 Q
-+(ecord.conf)-.1 E F2(CDR_SPEED)108 362.4 Q F0(Sets the def)144 374.4
- Q(ault speed v)-.1 E(alue for writing \(see also)-.25 E F2(\255speed)2.5
- E F0(option\).)2.5 E F2(CDR_FIFOSIZE)108 391.2 Q F0(Sets the def)144
- 403.2 Q(ault size of the FIFO \(see also)-.1 E F2(fs=)2.5 E F0 2.5(#o)C
-@@ -1465,16 +1465,16 @@
- (ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
- l be ignored if you log in using an account that has been created with \
- a remote)144 585.6 R(SCSI serv)144 597.6 Q(er program as login shell.)
---.15 E F3(FILES)72 626.4 Q F0(/etc/def)108 638.4 Q(ault/cdrecord)-.1 E
-+-.15 E F3(FILES)72 626.4 Q F0(/etc/rec)108 638.4 Q(ecord.conf)-.1 E
- (Def)144 650.4 Q 3.228(ault v)-.1 F 3.228
--(alues can be set for the follo)-.25 F 3.227(wing options in /etc/def)
---.25 F 5.727(ault/cdrecord. F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
-+(alues can be set for the follo)-.25 F 3.227(wing options in /etc/rec)
-+-.25 F 5.727(ecord.conf F)-.1 F 3.227(or e)-.15 F(xample:)-.15 E/F4
- 9/Times-Roman at 0 SF(CDR_FIFOSIZE=8m)144 662.4 Q F0(or)2.25 E F4
- (CDR_SPEED=2)2.5 E F0(CDR_DEVICE)144 679.2 Q .261
- (This may either hold a de)180 691.2 R .262
- (vice identi\214er that is suitable to the open call of the SCSI trans-)
---.25 F 1.418(port library or a label in the \214le /etc/def)180 703.2 R
--1.418(ault/cdrecord that allo)-.1 F 1.418(ws to identify a speci\214c)
-+-.25 F 1.418(port library or a label in the \214le /etc/rec)180 703.2 R
-+1.418(ecord.conf that allo)-.1 F 1.418(ws to identify a speci\214c)
- -.25 F(dri)180 715.2 Q .3 -.15(ve o)-.25 H 2.5(nt).15 G(he system.)-2.5
- E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
- (chilling V)-2.5 F(ersion 2.0)-1.11 E(12)201.225 E EP
-diff -ruN cdrtools-2.0-/doc/readcd.man cdrtools-2.0/doc/readcd.man
---- cdrtools-2.0-/doc/readcd.man Tue Dec 24 16:56:07 2002
-+++ cdrtools-2.0/doc/readcd.man Thu Dec 26 18:25:53 2002
-@@ -96,7 +96,7 @@
- If the argument to the ddeevv== option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.conf (see FILES section).
-
- ttiimmeeoouutt==_#
- Set the default SCSI command timeout value to _#
-diff -ruN cdrtools-2.0-/doc/readcd.ps cdrtools-2.0/doc/readcd.ps
---- cdrtools-2.0-/doc/readcd.ps Tue Dec 24 16:56:28 2002
-+++ cdrtools-2.0/doc/readcd.ps Thu Dec 26 18:25:53 2002
-@@ -330,8 +330,8 @@
- 120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
- (option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144
--132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
-+(preted as an label name that may be found in the \214le /etc/cdr)144
-+132 Q(ecord.conf \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
- F1(#).48 E F0 .13(Set the def)144 160.8 R .13
- (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
- 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -ruN cdrtools-2.0-/doc/scgcheck.man cdrtools-2.0/doc/scgcheck.man
---- cdrtools-2.0-/doc/scgcheck.man Tue Dec 24 16:56:55 2002
-+++ cdrtools-2.0/doc/scgcheck.man Thu Dec 26 18:25:53 2002
-@@ -90,7 +90,7 @@
- If the argument to the ddeevv== option does not contain
- the characters ',', '/', '@' or ':', it is inter-
- preted as an label name that may be found in the
-- file /etc/default/cdrecord (see FILES section).
-+ file /etc/cdrecord.conf (see FILES section).
-
- ttiimmeeoouutt==_#
- Set the default SCSI command timeout value to _#
-diff -ruN cdrtools-2.0-/doc/scgcheck.ps cdrtools-2.0/doc/scgcheck.ps
---- cdrtools-2.0-/doc/scgcheck.ps Tue Dec 24 16:57:15 2002
-+++ cdrtools-2.0/doc/scgcheck.ps Thu Dec 26 18:25:53 2002
-@@ -317,8 +317,8 @@
- 1.047(gument to the)-.18 F/F1 10/Times-Bold at 0 SF(de)3.547 E(v=)-.15 E F0
- 1.047(option does not contain the characters ',)3.547 F 1.047
- (', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
--(preted as an label name that may be found in the \214le /etc/def)144 96
--Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
-+(preted as an label name that may be found in the \214le /etc/cdr)144 96
-+Q(ecord.conf \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
- 10/Times-Italic at 0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
- (ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
- 2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
-diff -ruN cdrtools-2.0/readcd/readcd.1.orig cdrtools-2.0/readcd/readcd.1
---- cdrtools-2.0/readcd/readcd.1.orig 2009-12-06 23:02:40.000000000 +0100
-+++ cdrtools-2.0/readcd/readcd.1 2010-01-05 09:05:53.000000000 +0100
+diff -urN cdrtools-2.01.01.orig/readcd/readcd.1 cdrtools-2.01.01/readcd/readcd.1
+--- cdrtools-2.01.01.orig/readcd/readcd.1 2010-01-29 23:27:12.000000000 +0100
++++ cdrtools-2.01.01/readcd/readcd.1 2010-02-08 14:15:04.000000000 +0100
@@ -64,7 +64,7 @@
explained below refers to
.IR scsibus / target / lun
@@ -340,3 +323,27 @@
.sp
.B \h'-2m'Autotarget Mode
.br
+diff -urN cdrtools-2.01.01.orig/README.openserver cdrtools-2.01.01/README.openserver
+--- cdrtools-2.01.01.orig/README.openserver 2000-01-25 17:37:48.000000000 +0100
++++ cdrtools-2.01.01/README.openserver 2010-02-08 14:15:04.000000000 +0100
+@@ -55,7 +55,7 @@
+ ===================================================================
+ THE OLD ADDRESSING IS NO LONGER AVAILABLE!
+
+- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
++ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
+ ===================================================================
+
+ Running cdrecord with the old address method will result in an error!
+diff -urN cdrtools-2.01.01.orig/README.unixware cdrtools-2.01.01/README.unixware
+--- cdrtools-2.01.01.orig/README.unixware 2001-03-04 00:41:43.000000000 +0100
++++ cdrtools-2.01.01/README.unixware 2010-02-08 14:15:04.000000000 +0100
+@@ -64,7 +64,7 @@
+ ===================================================================
+ THE OLD ADDRESSING IS NO LONGER AVAILABLE!
+
+- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
++ PLEASE ADJUST YOUR /etc/cdrecord.conf FILES!
+ ===================================================================
+
+ Running cdrecord with the old address method will result in an error!
================================================================
---- CVS-web:
http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/packages/cdrtools/cdrtools-config.patch?r1=1.12&r2=1.13&f=u
More information about the pld-cvs-commit
mailing list