new fglrx driver and kernel 2.6.10

Bartosz Taudul wolf42 at wp.pl
Wed Jan 19 19:18:16 CET 2005


On Wed, Jan 19, 2005 at 07:08:50PM +0100, Tomasz Grobelny wrote:
> Attached patch is needed to properly load fglrx module on kernel 2.6.10. Would 
> be nice if anybody could add it to X11-driver-firegl.spec in CVS. It should 
> propably be applied conditionally (bcond? based on uname?).
It's incorrect patch. I've attached official one from ati.

wolf
-- 
  Bartek   .  - Zasada superpozycji... nie, to nie z kamasutry.
  Taudul   :  
          .:....................................................................
w o l f @ p l d - l i n u x . o r g            .:. http://wolf.valkyrie.one.pl/
-------------- next part --------------
--- agpgart_be.c 2005-01-06 9:05:02.000000000 +0100
+++ agpgart_be.c 2005-01-06 9:19:16.000000000 +0100

@@ -255,6 +255,12 @@
 }
 #endif
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+#define firegl_pci_find_class(class,from) pci_get_class(class,from)
+#else
+#define firegl_pci_find_class(class,from) pci_find_class(class,from)
+#endif
+
 int agp_backend_acquire(void)
 {
 	if (agp_bridge.type == NOT_SUPPORTED) {
@@ -718,7 +724,7 @@
 	 *        AGP devices and collect their data.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
 		pci_read_config_dword(device, 0x04, &scratch);
 
@@ -794,6 +800,13 @@
 				command &= ~0x00000001;
 		}
 	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
 	/*
 	 * PASS2: Figure out the 4X/2X/1X setting and enable the
 	 *        target (our motherboard chipset).
@@ -839,8 +852,9 @@
 	 *        command registers.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -871,6 +885,12 @@
         }
 	}
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
     return 0; /* success */
 }
 
@@ -5119,8 +5139,9 @@
 	 *        AGP devices and collect their data.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -5187,6 +5208,13 @@
 				command &= ~0x00000001;
 		}
 	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
 	/*
 	 * PASS2: Figure out the 4X/2X/1X setting and enable the
 	 *        target (our motherboard chipset).
@@ -5217,8 +5245,9 @@
 	 *        command registers.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -5249,6 +5278,12 @@
         }
 	}
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
     return(0); /* success */
 }
 
@@ -6494,10 +6529,10 @@
     // locate host bridge device
 #ifdef __x86_64__
     do {
-        dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
+        dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
     } while((dev) && !agp_check_supported_device(dev));
 #else
-    if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
+    if ((dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
         return -ENODEV;
 #endif
 
@@ -7040,8 +7075,12 @@
                     &agp_bridge.mode);
 				return hp_zx1_setup(dev);
 			}
-			dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
+			dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
 		} while (dev);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+                if(dev) pci_dev_put(dev);
+#endif
 		return -ENODEV;
 	}
 #endif	/* __ia64__ */
@@ -7462,6 +7501,11 @@
 	agp_bridge.free_gatt_table();
 	vfree(agp_bridge.key_list);
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+        // decrease the reference count.
+        pci_dev_put(agp_bridge.dev);
+#endif
+
 	if (agp_bridge.needs_scratch_page == TRUE) {
 		agp_bridge.scratch_page &= ~(0x00000fff);
 		agp_bridge.agp_destroy_page((unsigned long)


--- firegl_public.c 2005-01-06 9:05:02.000000000 +0100
+++ firegl_public.c 2005-01-06 9:19:16.000000000 +0100
@@ -88,6 +88,7 @@
 #include <linux/smp_lock.h>
 // newer SuSE kernels need this
 #include <linux/highmem.h>
+#include <linux/pagemap.h> // for lock_page and unlock_page
 
 #if defined(__ia64__)
 #include <linux/vmalloc.h>


More information about the pld-devel-en mailing list