pixman tests failures / build logs not mailed from th-i686

[Arkadiusz Miśkiewicz]

On 01/12/2018 08:24, Jakub Bogusz wrote:
> When trying to build pixman, on th-i686 tests fail impredictably
> - at least one of alphamap, composite, tolerance-test, but almost each
> time set of failing tests is different.
> Disabling openmp or parallel make seems to lower the number of failures,
> but doesn't eliminate them (and alphamap doesn't use openmp at all).
> Tests don't fail on my i686 nor carme-i686.
> Any ideas?

[2285767.849664] EDAC MC0: 1 UE Read error on
mc#0branch#0channel#0slot#0 or mc#0branch#0channel#1slot#0 (branch:0
slot:0 page:0x0 offset:0x0 grain:8 - Bank=0 Buffer ID = 0 RAS=0 CAS=0
Err=0x2000 (FB-DIMM Configuration Write error on first attempt))
[2294198.782119] EDAC MC0: 1 UE Read error on
mc#0branch#0channel#0slot#0 or mc#0branch#0channel#1slot#0 (branch:0
slot:0 page:0x0 offset:0x0 grain:8 - Bank=0 Buffer ID = 0 RAS=0 CAS=0
Err=0x2000 (FB-DIMM Configuration Write error on first attempt))
[2441072.340785] EDAC MC0: 1 CE Read error on
mc#0branch#1channel#0slot#0 (branch:1 channel:0 slot:0 page:0x0
offset:0x0 grain:8 syndrome:0x0 - Corrected error (Branch=1 DRAM-Bank=0
RDWR=Read RAS=0 CAS=0, CE Err=0x10000 (Correctable Non-Mirrored Demand
Data ECC)))
[2658392.799108] EDAC MC0: 1 UE Read error on
mc#0branch#0channel#0slot#0 or mc#0branch#0channel#1slot#0 (branch:0
slot:0 page:0x0 offset:0x0 grain:8 - Bank=0 Buffer ID = 0 RAS=0 CAS=0
Err=0x2000 (FB-DIMM Configuration Write error on first attempt))
[2757594.069188] EDAC MC0: 1 UE Read error on
mc#0branch#0channel#0slot#0 or mc#0branch#0channel#1slot#0 (branch:0
slot:0 page:0x0 offset:0x0 grain:8 - Bank=0 Buffer ID = 0 RAS=0 CAS=0
Err=0x2000 (FB-DIMM Configuration Write error on first attempt))

Seems to be some hw problem :-/

> BTW - I'm not getting th-i686 build reports by e-mail (only from th-x32
> and th-x86-64).

Fixed.

-- 
Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org )