X bugs

[Wojtek Slusarczyk]

On Mon, 21 Dec 1998, Sergiusz Pawlowicz wrote:

> [ser w ipng ser]$ x
> 
> /usr/X11R6/bin/Xwrapper: error in loading shared libraries:
> /usr/X11R6/bin/Xwrapper: symbol pclose, version GLIBC_2.1 not defined in
> file libc.so.6 with link time reference

~$ rpm -q XFree86-libs
XFree86-libs-3.3.3-1.1d

~$ rpm -q XFree86-S3
XFree86-S3-3.3.3-1.1d

~$ rpm -q glibc
glibc-2.0.107-1d.i386.rpm

~$ startx

XFree86 Version 3.3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 18 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.1.131 i586 [ELF] 
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) S3: Graphics device ID: "ELSA Winner 1000AVI (AT&T 20C409 version)"
(**) S3: Monitor ID: "My Monitor"
(--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) S3: PCI: base address not correctly aligned or address conflict
		base address changed from 0xe4000000 to 0xf8000000
(--) S3: PCI: 868 rev 0, Linear FB @ 0xf8000000
(--) S3: chipset:   868 rev. 3
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(--) S3: card: ELSA Winner 1000AVI detected, Ser.No. H-0142.016.086
(--) S3: Detected an ATT 20C409 RAMDAC
(**) S3: videoram:  2048k
(--) S3: Detected an ATT 20C409 RAMDAC
(**) S3: Ramdac type: att20c409
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using ATT20C409/ATT20C499 programmable clock
(--) S3: Maximum allowed dot-clock: 50.000 MHz
(**) S3: Mode "800x600": mode clock =  50.000
(**) S3: Using sparse 32 bpp.  Color weight: 888
(--) S3: Virtual resolution set to 800x600
(--) S3: mode line has to be modified ...
		from    800  856  976 1040    600  637  643  666
		to      800  856  976 1024    600  637  643  666
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: S3 968 dashed line malfunction, using workaround code
(--) S3: Using a single 54x54 area at (746,601) for expanding pixmaps
(--) S3: Using 32 planes of 746x54 at (0,601) aligned 8 as font cache
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 \
-R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 \
"The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> "\
 -eml "Errors from xkbcomp are not fatal to the X server" \
 keymap/xfree86 compiled/xfree86.xkm'

Upgradnij system.... 

-- 
Wojtek Slusarczyk (091)4494148
Technical University of Szczecin
PGP KeyServer pgpkeys.mit.edu