Xy 4.0.1 i karta TV [długawe]

Lukasz Trabinski lukasz w lt.wsisiz.edu.pl
Wto, 5 Wrz 2000, 01:24:19 CEST


Witam

Nie wiem, czy ten problem był poruszany...
Przekompilowałem i odpaliłem przed chwilą sobie Xy 4.0.1.
Wszystko (no może prawie wszystko) działa jak burza z wyjątkiem mojej
karty TV BT878 AVerMedia TVCaputre98 (przez więkość softu widziana jako
TVPhone - ale to chyba bez znaczenia). Po załadowaniu modułów bttv tudzież
odpaleniu np. xawtv, wywala mi:

This is xawtv-3.17, running on Linux/i586 (2.2.17pre20)
visual: id=0x23 class=4 (TrueColor), depth=16
visual: id=0x24 class=4 (TrueColor), depth=16
x11: 1600x1200, 16 bit/pixel, 0 byte/scanline
WARNING: Your X-Server has no DGA support.
waitpid: No child processes
WARNING: Your X-Server has no DGA support.
waitpid: No child processes
v4l: 1600x1200, 16 bit/pixel, 0 byte/scanline
ioctl VIDIOCCAPTURE: Invalid argument

Zgodnie z manualem dodałem do XF86Config:

  SubSection "extmod"
   Option  "omit XFree86-DGA"
  EndSubSection

System to PLD 1.0 (soft) pomieszane z RedHatem 6.2 (glibce, gcc)
kernel 2.2.17pre20, glibc 2.1.3-19, bttv 0.6.5 

no ale to nie pomoga...

kwintv natomiast wywala:

Warning: main: VideoModeExtension Version mismatch, disabled
Warning: main: server version 2.0 != included version 0.8
Debug: v4l1: Using interface Video4Linux in ::v4lxif
Debug: v4l1: Grabber name: BT878(AVerMedia TVPhone)
Debug: 	 capture: Can capture to memory
Debug: 	 tuner: Has a tuner of some form
Debug: 	 teletext: Has teletext capability
Debug: 	 overlay: Can overlay its image onto the frame buffer
Debug: 	 clipping: Overlay clipping is supported
Debug: 	 frameram: Overlay overwrites frame buffer memory
Debug: 	 scales: The hardware supports image scaling
Debug: v4l1: range of tv size : 32x32 => 924x576
Debug: v4l1: input channels: 3
Debug: 	 [1] Television: has tuner [1], audio, tv
Debug: 	 [2] Composite1: no tuner [0], audio, camera
Debug: 	 [3] Composite2: no tuner [0], audio, camera
Debug: v4l1: input audios: 3
Debug: 	 [1] TV: mutable[unmuted] vol=-1, bass=-1, ter=-1
Debug: 	 [2] TV: mutable[unmuted] vol=-1, bass=-1, ter=-1
Debug: 	 [3] TV: mutable[unmuted] vol=-1, bass=-1, ter=-1
Debug: v4l1: tuner: Television 0-4294967295
Debug: v4l1: tuner sees stereo: no
Debug: v4l1: tuner supports modes (active: PAL): 
Debug: 	 PAL
Debug: 	 NTSC
Debug: 	 SECAM
Debug: v4l1:  picture:  brightness=32768 hue=32768 colour=32512 contrast=27648
Debug: v4l1:  picture : whiteness=0 depth=0 palette=3[rgb16]
Debug: v4l1: hope physical screen format is <16 bit TrueColor (LE)>
Debug: v4l1: set palette to 3
Debug: v4l1: palette is 3
Debug: v4l1: bpp 16, bpl 3200, width 396, height 296
Debug: v4l1: video buffer: size 4259840, frames 2
Debug: v4l1: memory for snap shots: 0x405d3000
Debug: v4l1: minw 32, maxw 768, minh 32, maxh 576 in ::capCapSize
Debug: v4l1: setAudioMode= 2 [stereo]
Debug: v4l1: getAudioMode= 1
Debug: v4l1: setAutioMute [0] muted
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Warning: v4l1: VIDIOCCAPTURE in ::setCapture
Debug: v4l1: setAutioMute [0] unmuted
Debug: v4l1: ::~v4l1if begin
Debug: v4l1: ::~v4l1if end
Debug: v4lx: Close device in ::~v4lxif
Listing all visuals:
Visual class       TrueColor  ( 4 ) 
    id              0x23
    screen                 0
    depth                 16
    red_mask        0x00f800
    green_mask      0x0007e0
    blue_mask       0x00001f
    colormap_size         64
    bits_per_rgb           6
Visual class       TrueColor  ( 4 ) 
    id              0x24
    screen                 0
    depth                 16
    red_mask        0x00f800
    green_mask      0x0007e0
    blue_mask       0x00001f
    colormap_size         64
    bits_per_rgb           6



Aha, próbowałem zawalczyć z modułem v4l - Video 4 Linux driver, ale nie
bardzo mi wychodziło... :(


-- 
*[ Łukasz Trąbiński ]*
SysAdmin @wsisiz.edu.pl



Więcej informacji o liście dyskusyjnej pld-devel-pl