pcmcia i eth

[krzysiekt18@poczta.fm]

[niedziela, 07 październik 2001], Jaros?aw Kamper napisał(a):

>Linux PCMCIA Card Services 3.1.26
>  kernel build: 2.2.19 #1 Wed Aug 8 15:56:55 UTC 2001
>  options: [pci] [cardbus] [pnp]
>PCI routing table version 1.0 at 0xfdf40
>PnP: PNP BIOS installation structure at 0xc00f7430
>PnP: PNP BIOS version 1.0, entry at f0000:aacb, dseg at 400
>Intel PCIC probe:
>  TI 1420 rev 00 PCI-to-CardBus at slot 00:04, mem 0x68000000
>    host opts [0]: [serial pci & irq] [pci irq 10] [lat 64/32] [bus
>32/34]
>    host opts [1]: [serial pci & irq] [pci irq 10] [lat 64/32] [bus
>35/37]
>    ISA irqs (scanned) = 3,4,9,11 PCI status changes

>(to z kernela)

Uzyj kernel-2.2.19-22.iX86.rpm, jest pcmcia-cs-3.1.29 

>cardmgr: starting, version is 3.1.28
>cardmgr: watching 2 sockets
>cardmgr: Card Services relase does not match
>kernel: cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8139
>cardmgr: initializing socket 0
>cardmgr: unsupported card in socket 0
>cardmgr:   product info: "Realtek", "Rtl8139"
>cardmgr:   function: 6 (network)
>cardmgr:   PCI id: 0x10ec, 0x8139

>(a to z cardmgr)

Uzyj pcmcia-cs-3.1.29.iX86.rpm i problem z glowy (IMHO).
Jesli cos sie bedzie dzialo jednal wszelkie komunikaty w logach dawaj na pld-devel-pl, to ktos sie tym napewno zajmie :)

Pozdrawiam:

Krzysiek "dzimi" Taraszka