dalej kernel 2.6, teraz SCSI

[Karol Kreński]

Witam,

Wczoraj zgłaszałem problemy z kernelem 2.6.5 na IDE, był to problem
gruba - pomogło root=0305. Ze SCSI nie działa (root=0802).

[root w siedem mimooh]# rpm -q pci-database geninitrd
pci-database-0.4-1
geninitrd-3865-2

[root w siedem mimooh]# pcidev scsi
11918010 atp870u Artop Electronic Corp|AEC6712UW SCSI

[root w siedem mimooh]$ lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
        Subsystem: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
        Flags: bus master, 66Mhz, medium devsel, latency 0
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [a0] AGP version 2.0
        Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: e0000000-e1ffffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Capabilities: [80] Power Management version 2

00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 16
        I/O ports at d000 [size=256]
        Memory at e2010000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

00:0a.0 SCSI storage controller: Artop Electronic Corp AEC6712UW SCSI
(rev 01)
        Subsystem: Artop Electronic Corp AEC6712UW SCSI
        Flags: bus master, medium devsel, latency 254, IRQ 18
        I/O ports at d400 [size=64]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [50] Power Management version 1

00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at e000 [size=32]
        Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
20 [EHCI])
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at e2011000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at e400 [size=16]
        Capabilities: [c0] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 50)
        Subsystem: Elitegroup Computer Systems: Unknown device 0996
        Flags: medium devsel, IRQ 22
        I/O ports at e800 [size=256]
        Capabilities: [c0] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] (rev a4) (prog-if 00 [VGA])
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 16
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0


[root w siedem boot]# sudo geninitrd -v -f foo 2.6.5-1
Using modules:  kernel/drivers/scsi/scsi_mod.ko
kernel/drivers/scsi/sd_mod.ko kernel/fs/reiserfs/reiserfs.ko
`/lib/modules/2.6.5-1/kernel/drivers/scsi/scsi_mod.ko' ->
`/tmp/initrd.2ld7Ym/lib/modules/2.6.5-1/kernel/drivers/scsi/scsi_mod.ko'
`/lib/modules/2.6.5-1/kernel/drivers/scsi/sd_mod.ko' ->
`/tmp/initrd.2ld7Ym/lib/modules/2.6.5-1/kernel/drivers/scsi/sd_mod.ko'
`/lib/modules/2.6.5-1/kernel/fs/reiserfs/reiserfs.ko' ->
`/tmp/initrd.2ld7Ym/lib/modules/2.6.5-1/kernel/fs/reiserfs/reiserfs.ko'
/bin/initrd-busybox -> /tmp/initrd.2ld7Ym/bin/sh
Loading module scsi_mod without options.
Loading module sd_mod without options.
Loading module reiserfs without options.

Czy dobrze rozumiem, że tutaj powinny się pojawić wpisy związane z
kontrolerem?
Próbowałem kilka różnych 2.6 i żaden sobie chyba nie radzi. 2.2 i 2.4
jakoś sobie radzą. 

mimooh